9mm chain mail long sleeve
The chain mail L-XL was made for wearers of average chest circumferences. It is wide enough to wear a gambeson underneath, has long sleeves and is approxamatly knee length. We suggest this chain mail for wearers with an chest circumference of app 90 cm to 125 cm. This way the chain mail can be worn over a gambeson and will extend to a maximum of 140 cm underneath the arms. The rings in the "armpit" are fully riveted. As shown on the picture, we recommend to wear the chain mail above a gambeson and with a belt, to readjust the weight. Material: Spring SteelRing diameter: 9 mmColour: blank, oil finish, brownedWeight: Aprox. 13 kg"4-in-1" pattern weaving This chain mail was made for bigger people and their need for bigger chain mail shirts.It is app. XXL-3XL in size, is equipped with long sleeves and covers the thighs half way (depending on how much material you will need around the middle of the body. We suggest to wear a padded gambeson underneath any armour to avoid scratches and bruises. Those might occur at all times when wearing any metal armour. A belt will distribute the weight.Measurements: Width: 92 cmLength (at max. width): 45 cmWeight: 8,25 kg9mm rings (with 1mm wire)"4-in-1" pattern weavingColours: blank, oil finish, browned
Adam belt shield
Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Adam" series, this shield is decorated with the series' typical ridge along the edge. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g
Adam bracers
Our "Adam" bracers are a little bit shorter than their cousins from our other series. Because of this they will also fit adolescents or smaller people. Additionally, like all the other "Adam" armour parts, it has a corrugation along the rim.Material: 1.2mm steelColour: blank, brownedMeasurements: 20cm length, 17cm on top, 13cm on the bottom
Adam breastplate
Our breastplate "Adam" is something special. Its design was inspired by the first complete breastplates from the 14th century. Metal lamellae protect the sides and the lower back.This piece of armour is fastened by two buckles on the backside. Maybe you take a look at our Padded Jackets to wear them underneath your Armour. This maximizes the comfort wearing it.You might want to consider a combination with a Chainmail Shirt? Material: 1,2mm steelColour: blank, browned
Adam gorget
The "Adam" gorget captivates with simple elegance. Two embossed ornamental beads are not only jewelry, they also give the collar a lot of stability. All edges are of course, as with all Mytholon armor, crimped. Thanks to its simple shape, this gorget can be used for all imaginable armament concepts. All the spaulder from our plate armour range can be attached to this collar. Material: 1, 2mm steelShoulder blade width: 8cmTotal width: 33cmNeck length: 14cmFront length: 22cmTotal length: 46cm Weight: 1 kg Colour: blank, browned
Adam Greaves
Our "Adam" greaves are pieces of light leg rmour that are also well-suited for the younger generation. They feature the ornamental border typical for the "Adam" series. For an average adult, these greaves will approximately reach down to the middle of the calf. Material: Steel Measurements: 30cm length, 22cm on top, 15cm on the bottom The price refers to one pair.
Adam guard set
We offer you the "Adam" guard set, consisting of bracers & greaves for a discounted set price. Material: 1.2mm steel
Adam spaulders large
The big shoulders of the "Adam" series have a three-segment lamellar. It is attached to a generous, two-part shoulder segment and gives the wearer a lot of mobility. Like the entire "Adam" series, these large shoulderarmour has a simple elegance. The typical bead adorns the curved main segment and gives it additional stability. The large shoulders are good to complement a heavy armour and can be combined with any Mytholon plate gorget. Material: 1, 2mm steelTotal length: 30 cm Top length: 17 cm Top width (curve): 34.4 cm Bottom width: 21 cmWeight: 2.3 kg
Adam spaulders small
Our small "Adam" spaulders are perfectly suited to be worn as additional armour over chainmail or leather armour. Due to their size and the flexible lamellae covering the upper arms, these pieces will not encumber you in any way.Material: 1.2mm steelWidest arm circumference: 56 cmTightest arm circumference: 34,5 cmColour: blank, browned
Alberto morion
The Morion developed from the Bascinet originally. The high dome is typical for this form. It was popular with pikemen, city militias and body/imperial guards. You can still find it with the swiss guard of the vatican today. OnesizeMaterial: SteelColour: blank
Albrecht armour set
The Leatherarmours of the "Albrecht" series are made of high-quality upper leather. Many slats and segments form shoulders, tassets, torsoarmour, as well as greaves and bracers. Stable riveted, this construction makes the armor parts not only sturdy and flexible, it also gives "Albrecht" its extraodinary character. Rangers, warriors, elves, battle magicians, sinister villains and radiant heroes... a variety of costume- and armament concepts can be achieved with this low-cost armor set. The torso is adjustable in size, so "Albrecht" also works perfectly in combination with a chainmail or gambeson. Let your imagination run wild... Leather is a natural product. The hue may differ from the picture. List of products included: 1. Albrecht Shoulders2. Albrecht Leg Pockets3. Albrecht Torso4. Albrecht Bracers5. Albrecht Leg Rails Materials: leather, suede Leather is a natural product and absorbs dyes differently. In addition, our products are handmade. Colors and dimensions may therefore vary slightly. Photographic representation and display settings may affect color reproduction.
Albrecht bracers
The Bracers "Albrecht" are made of high-quality upper leather. They consist of three riveted segments and an additional wrist guard they are closed with two straps and adapt well to the shape of the arm. Material: Upper leather Length: 26 cm, Width 24 cm on the crook, 18 cm on the wrist Colours: Black, brown, red Leather is a natural product and reacts differently to dye products. The hue may differ from the picture.
Albrecht greaves
The Albrecht greaves are sturdy leather greaves with a simple, functional design. Their distinctive look, featuring riveted reinforcing straps and an extended ankle guard, makes them especially suitable for mercenaries, rangers, men-at-arms, and other rugged characters. They are securely fastened to the leg with three adjustable buckle straps, ensuring a secure fit while maintaining excellent freedom of movement. The durable leather is built to last and develops a unique patina over time, further enhancing the authentic appearance of the equipment. Thanks to their understated design, the Albrecht greaves can be combined with almost any leather or metal armour and complement both simple garments and complete armour sets. Material: Leather Length: 40 cmWidth: 27 cm Please note: Colours may differ from those shown in the images. Leather is a natural product and absorbs dyes differently. In addition, all of our products are handcrafted, so colours and dimensions may vary slightly. Photographic representation and your display settings may affect colour reproduction. Our leather products are delivered only lightly treated with leather grease. Applying additional leather care products may darken the colour. Unfortunately, we cannot guarantee an exact shade.
Albrecht spaulders
The leather shoulders are, like the entire Albrecht series, made of high-quality upper leather. Two flexible segments provide a lot of mobility and give the armor its exceptional character, reminiscent of a Roman Lorica Segmentata. Albrecht is ideal for light warriors such as Ranger or archers. The shoulders are a great addition to the Albrecht Torsorüstung. They are closed and fixed by means of belts on the shoulder and upper arm. Material: Upper Leather Length: 34 cm Width: 47 cm Weight: 900 g A pair of shoulders are offered here. The hue may be different from the picture. Leather is a natural product and absorbs dyes differently. In addition, our products are handmade. Colors and dimensions may therefore vary slightly. Photographic representation and display settings may affect color reproduction.
Albrecht tassets
The "Albrecht" tassets are very good to combine with the torso armour. They are closed with a wide, comfortable suede belt with two buckles around your hip.On the backside they can be adjusted individually with a leather strap, which allows this belt to be worn by almost any wearer.Due to the natural colouring of leather, it is possible, that this article comes in various shades.Material: upper leather, suedeLenght: 60 cmWidth: 43 cmWeight: Aprox. 1,5 kgColour: black, brown, red Leather is a natural product and absorbs dyes differently. In addition, our products are handmade. Colors and dimensions may therefore vary slightly. Photographic representation and display settings may affect color reproduction.
Albrecht torso
The "Albrecht" series' torso armour is a very conspicuous piece: made from high-quality upper leather it offers you the possibility to attach lots of different spaulders to its integrated collar.The highly sophisticated production allows this body armour to be worn over a shirt of chain maille or a padded jacket. It increases the value of simply every other armour worn with it and makes every wearer look even more considerable.Due to the natural colouring of leather, it is possible, that this article comes in various shades.Material: upper leatherColours: black, brown, redLength: 51 cmWidth: 55 cmWeight: 2 kg Leather is a natural product and absorbs dyes differently. In addition, our products are handmade. Colors and dimensions may therefore vary slightly. Photographic representation and display settings may affect color reproduction.
Alistair bracers 2nd ed.
The "Alistair" bracers were produced by the Italian leather Manufactory "Fucina del Drago". They are made of high quality cowhide leather, tanned in Tuscany, and consist of three solid riveted segments. Overlapping, with punched ornamental beading and asymmetric curved lines, they remind of leaves or dragon scales. The "Alistair" bracers are excellent for fantastic roles such as elves or rangers. They are closed with sturdy leather straps and cast buckles made of Zamak. The Italian company "Fucina del Drago" in english "Dragon Forge" is known for particularly beautiful leather products. Only high-quality leather is processed there. Elaborate Punzierarbeiten and the antique patina make these armor parts a real eye-catcher. Material: LeatherLength: 27 cmWidth: 26 cmColours: Brown, green, red, black Leather is a natural product and adopts dye products differently . The hue may differ from the picture.
Alistair deluxe bracers
The"Alistair deluxe" bracers were made by the Italian leather manufactory "Fucina del Drago". They are made of high-quality cowhide leather tanned in Tuscany and consist of three firmly riveted segments. Overlapping and featuring embossed decorative beads and asymmetrically curved lines, they are reminiscent of leaves or dragon scales. The bracers Alistair are excellent for fantasy-inspired roles like elves or rangers. They are closed with sturdyleather straps and cast zamac buckles. The Italian company "Fucina del Drago" (which translates into Dragon Forge) is famous for its beautiful leather products. They only use high quality leather and materials. Elaborate embossing and the antique patina make their pieces of armour a real eye-catcher. Material: upper leather Length: 27cm Width: 26cm Leather is a product of nature and may take dyes differently. The actual hue may differ from the image.
Alistair gorget
The leather gorget "Alistair" is a special piece of armour. Handmade in Italy, by "Fucina de Drago" It is basically an independent, small chest armour. The intricately embossed collar is lengthened by a chest and back segment. The gorget is fixed with wide belts under the arms. It is ideally combinable with chain mails, gambesons or tabbards and a fantastic base for many light armour concepts. Material: Upper Leather Length: 55 cm Width: 30 cm Weight: 950 g Colors: Brown & Black Leather is a natural product and adopts different dye products. The hue may differ from the picture.
Alistair gorget deluxe
The leather gorget "Alistair" is a special piece of armour. Handmade in Italy, by "Fucina de Drago" It is basically an independent, small chest armour. The intricately embossed collar is lengthened by a chest and back segment. The gorget is fixed with wide belts under the arms. It is ideally combinable with chain mails, gambesons or tabbards and a fantastic base for many light armour concepts. Material: Leather Length: 55 cm Width: 30 cm Weight: 950 g Leather is a natural product and adopts different dye products. The hue may differ from the picture.
Alistair greaves 2nd Edition
The "Alistair" greaves were produced by the Italian leather Manufactory "Fucina del Drago". They are made of high quality cowhide leather, tanned in Tuscany, and consist of three solid riveted segments. Overlapping, with punched ornamental beading and asymmetric curved lines, they remind of leaves or dragon scales. The greaves Alistair are excellent for fantastic roles such as elves or rangers. Due to the conical shape and the wide recess for the foot, they sit comfortably even during longer marches. They are closed with sturdy leather straps and cast buckles made of Zamak. The Italian company "Fucina del Drago" in english "Dragon Forge" is known for particularly beautiful leather products. Only high-quality leather is processed there. Elaborate decorations and the antique patina make these armor parts a real eye-catcher. Material: LeatherLength: 40 cmWidth: 22.5 cm - 28.5 cm Leather is a natural product and adopts dye products differently . The hue may differ from the picture.
Alistair greaves deluxe Braun
Die Beinschienen "Alistair deluxe" wurden von der italienischen Ledermanufaktur "Fucina del Drago" hergestellt. Sie sind aus hochwertigem, in der Toskana gegerbtem Rindsleder gefertigt und bestehen aus drei fest vernieteten Segmenten. Überlappend, mit punzierten Ziersicken und asymetrisch geschwungen Linien, erinnern sie an Blätter oder Drachenschuppen. Die Beinschienen Alistair eignen sich ausgezeichnet für phantastische Rollen wie Elfen oder Waldläufer. Geschlossen werden sie mit stabilen Lederriemen und gegossenen Schnallen aus Zamak.Die italienische Firma "Fucina del Drago" auf deutsch "Drachenschmiede" ist bekannt für besonders schöne Lederprodukte. Dort wird ausschließlich hochwertiges Leder verarbeitet. Aufwendige Punzierarbeiten und die antike Patina machen diese Rüstungsteile zu einem echten Hingucker. Material: OberlederLänge: 27 cmBreite : 26 cmLeder ist ein Naturprodukt und nimmt Färbemittel unterschiedlich an. Der Farbton kann von der Abbildung abweichen.
Alistair spaulders
The leather spaulders "Alistair" were manufactured by the Italian leather Manufactory "Fucina del Drago". They are made of high quality cowhide leather tanned in Tuscany and consist of five flexible segments. With their finely tooleded ornamental beading and curved lines, these leather spaulders are perfect for combination with the "Alistair" or "Kendra" series armour parts. Due to the many segments, the "Alistair" leather spaulders extend far to the upper arm and are an ideal complement for heavier armament concepts. Material: Upper LeatherLength: 33 cmWidth: 29.5 cmWeight (pair): 850 gColours: Brown, black, red The price is for a pair of spaulders Leather is a natural product and adopts different dye products. The hue may differ from the picture.
Alwin bascinet
The Alwin bascinet with chainmail aventail is based on a 14th-century European helmet type. Worn by knights and soldiers throughout the late Middle Ages, it ranks among the classic helmet forms of the period. The deep-drawn, pointed helmet bowl offers solid all-around protection for the head, neck, and shoulders – especially in combination with the attached mail. A notable feature of this model is the removable nasal bar, which provides additional facial protection when needed and can be mounted or detached with just a few steps – ideal for varied portrayals or practical use. The interior features a fixed foam lining for comfort, and a fully adjustable chin strap ensures a secure fit. Material: Steel (helmet), steel rings (aventail), foam (padding), synthetic leather (strap) Ring diameter of mail: approx. 9 mm Size: suitable for head circumference approx. 56–62 cm (not individually adjustable but the inlay can be removed)
Antonius armour 2ND ED.
A beautifully decorated leather armour for the upper part of the body. The gorget is attached to the rest of the armour, its surface is decorated with a kind of hammer finish. The edges are embossed with different patterns. The size can be adjusted individually by two buckle straps on each side of the armour. Two straps at the upper part of the gorget can be used to attach all kinds of pauldrons. Furthermore additional tassets can be added at the small eyelets in the front.The italian company "Fucina del Drago" is famous for its beautiful leather products. They only use high quality leather and materials. Elaborate embossing and the antique patina make their pieces of armour a real eye-catcher. Material: upper leatherLength: 60 cm Leather is a natural product and takes dye differently. Thereby the colouring may differ from the images.
Antonius bracers 2ND ED.
These elaborately decorated bracers are a real eye catcher. The surface of the upper part has got a kind of hammer finish. The lower part is embossed with a decorative pattern. They go very well with the Antonius cuirass and of course the Antonius greaves. They are closed with two buckle straps in the back. The italian company "Fucina del Drago" is famous for its beautiful leather products. They only use high quality leather and materials. Elaborate embossing and the antique patina make their pieces of armour a real eye-catcher. Sold in pairs.Material: upper leatherLength: 23 cm Width: 29 cm Leather is a natural product and takes dye differently. Thereby the colouring may differ from the images.
Antonius greaves 2ND ED.
These elaborately decorated greaves are a real eye catcher. The surface of the upper part has got a kind of hammer finish. The lower part is embossed with a decorative pattern. They go very well with the Antonius cuirass and of course the Antonius bracers. They are closed with two buckle straps in the back. The italian company "Fucina del Drago" is famous for its beatiful leather products. They only use high quality leather and materials. Elaborate embossing and the antique patina make their pieces of armour a real eyecatcher. Sold in Pairs.Material: upper leather Leather is a natural product and takes dye differently. Thereby the coloruing may differ from the images.
Antonius helmet
The leather helmet "Antonius" was produced by the Italian leather Manufactory "Fucina del Drago" and is made of high-quality upper leather. Intricately designed and assembled from many solid riveted segments, it is very stable in shape. Finely embossed beading and lines as well as brass rivets and the typical finish for "Fucina del Drago" make this helmet a special piece of armour. The richly decorated forehead segment is made in the form of a visor but not movable. With an elongated neck segment, the helmet reminds of a sallet. We recommend to wear an uphostered cap under the helmet as it is not padded. This increases the wearing comfort and the protective effect considerably. This fantastic armour part is closed with a sturdy chin strap. Material: Upper Leather Height: 22 cm Width 20 cm Length: 25 cm Head circumference: Up to 59 cm portable Weight 500 g Leather is a natural product and adopts different dye products. The hue may differ from the picture.
Antonius helmet deluxe
The leather helmet "Antonius" by the Italian leather manufactory "Fucina del Drago" is made of high-quality upper leather. Elaborately designed and assembled from many firmly riveted segments, it is very stable in shape. Finely embossed beading and lines as well as brass rivets and the typical finish for "Fucina del Drago" make this helmet a special piece of armour. The richly decorated forehead segment is made in the shape of a visor, but id not movable. With its elongated neck segment, this helmet is reminiscent of a sallet. The deluxe version is additionally provided with a visor, which is firmly riveted and offers additional face protection. We recommend to wear an padded cap under the helmet as it is not padded. This increases the wearing comfort and the protective effect considerably. This fantastic armour part is fastened with a sturdy chin strap. Material: upper Leather Height: 26cm Width: 20m Length: 25cm Head circumference: wearable up to 59cm Weight: 505g Leather is a product of nature and may take dyes differently. The actual hue may differ from the image.
Antonius spaulders
The matching spaulders for our "Antonius" leather armour. The seperate segments are movable and dont limit the movement. The elaborate punchings and the antique finish are a real eye-catcher. Material: upper leatherColours: brown & black
Antonius spaulders deluxe
The matching spaulders for our "Antonius" leather armour. The seperate segments are movable and not limiting the movement. The elaborate punchings and the antique finish are a real eye-catcher. The deluxe Version has additional decorations and a sword breaker. Material: upper leather Leather is a natural product and reacts differently to dyes. Therefore, shades may differ from the picture. We recommend the regular care with high-quality leather fat.
Antonius tassets
The "Antonius" tassets matching our "Antonius" leather cuirass, made by the Italian manufactury "Fucina del Drago". They can easily be attached to the torso armous by means of two adjustable straps. The cuirass' embossed ornamental bands are repeated on the tassets. They complete the armour and form an optical continuation of the torso armour design. Of course, they also protect your thighs against hits in combat, allowing you to avoid many a bruise with style. The Italian company "Fucina del Drago" (which translates into Dragon Forge) is famous for its beautiful leather products. They only process high-quality leather there. Elaborate embossed designes and the antique patina make these armor parts a real eye-catcher. The Italian leather manufactory is setting new standards with a revised design of this leather armour.Material: upper leatherLength: 39cmWidth: 28cmColours: black, brown and dark red Leather is a product of nature and may take on dyes differently. Therefore, the actual hue may differ from the image. We recommend regular care with high-quality leather grease.
Arlan conical helmet blank
Kegelhelmets were widely spread in medieval asia and europe in many different variations.This one has some cheek flaps, a high dome to protect the skull, and ends in a crest of horses\\' hair. The maille protects neck and chest area.UnisizeMaterial: Steel\\"Colour\\": blankWe suggest to wear this helmet with a padded coif \\"Leopold\\" to avoid scratches and bruises on the head. This will improve the comfort wearing it.
Artemis Archer bracer celtic
An elaborately decorated forearm protection for archers. It is punched with Celtic knots and patterns. The buckles are worn on the outside. The inside is cut out so that it does not obstruct the arm when bending. They are available in two different sizes. The price is valid for one arm splint. The Italian company Fucina del drago in German Dragonforge is known for particularly beautiful leather products. Only high-quality leather is processed there. Elaborate hallmark work and the antique patina make these armour parts a real eye-catcher. Material: Leather Variant: small length: 20 cm width: 27 cm Variant: large length: 21,5 cm width: 31 cm Leather is a natural product and accepts dyes differently. The colour shade may differ from the illustration.
Artemis archers armguard 2nd edition
A forearm protection for archers and archeresses. The straps are worn at the outside. The inside is cut out widely so as not to hinder the arm when bending it. These armguards are available in two different sizes.The price refers to a single armguard.The Italian company "Fucina del Drago" (Dragon Forge) is famous for its beautiful leather products. They only use high quality leather. Elaborate embossing and the antique patina make their pieces of armour a real eye-catcher. Material: leatherLength: 20 cm/21 cmWidth: 27 cm/32 cmColour: brown/blackLeather is a natural product and takes dye differently. Therefore, the actual colour may be vary from the one shown in the picture.
Artemis armour 2ND ED.
The Italian company "Fucina del Drago" is well-known for its beautiful leather products. Born from their workshops, "Artemis" is a very elaborately crafted torso armour for women. Hardened upper leather was shaped and rigidly fixed together using durable brass rivets in order to create the armour's chest and back portions. Refined embossings showing celtic knots embellish the edges and the center of the chest. On the sides, the armour's size may be adjusted by means of three cast brass buckles.The leather is dyed evenly and was painted with a special solution to make the surface resemble antique patina.Material: upper leatherMeasurements: Stomach circumference: approx. 75cm to approx. 100cmChest circumference: approx. 80cm to approx. 105cmLength (back): approx. 55cmLength (chest): approx. 56cmWeight: approx. 1350gColours: brown & blackLeather is a product of nature and takes dyes differently. The hue may vary from the image.
Artemis armour deluxe 2ND ED.
A beautiful leather torso for ladies. It is curved in the upper part and slim fit around the waist. The edges are embossed with pretty embellishments. The size can be adjusted to the wearer with two buckle straps at each side.The italian company "Fucina del Drago" is famous for its beautiful leather products. They only use high quality leather and materials. Elaborate embossing and the antique patina make their pieces of armour a real eye-catcher.Material: upper leatherMeasurements:Waist circ.: ca. 75 cm - ca. 100 cmChest circ.: ca. 80 cm bis ca. 105 cmBack length: ca. 55 cmChest length: ca. 56 cmWeight: ca. 1350 g Leather is a natural product and takes dye differently. Thereby the colouring may differ from the images.
Artemis spaulders 2ND ED.
The matching spaulders for our leather armour Artemis. They are cut rather delicately and therefore ideal for female warriors. They can be attach to the cuirass with laces.The italian company "Fucina del Drago" is famous for its beautiful leather products. They only use high quality leather and materials. Elaborate embossing and the antique patina make their pieces of armour a real eye-catcher. Sold in pairs.Material: upper leatherLength: 38 cmWidth: 17 cm Leather is a natural product and takes dye differently. Thereby the colouring may differ from the images.
Artemis spaulders deluxe
The spaulders matching our leather armour "Artemis Deluxe". They have a rather delicate profile and are thus ideally suited for female warriors. In this "Deluxe" edition, the spaulders are embossed with Celtic knots as well as a triskelion. This makes them ideal for the portrayal of Norse characters. The leather spaulders can be attached to the armour by means of a leather strap. The Italian company "Fucina del Drago" (which translates into Dragon Forge) is famous for its beautiful leather products. They only use high quality leather and materials. Elaborate embossing and the antique patina make their pieces of armour a real eye-catcher.The price pertains to one pair of spaulders. Material: upper leather Length: 38cm Width: 17cmLeather is a product of nature and may take dyes differently. The actual hue may differ from the image.
Arthur gambeson set
The long Arthur gambeson is a diamond-quilted vest that perfectly combines protection and freedom of movement. It is fastened at the front with four roller buckles, while the matching sleeves and tassets can be laced on using brass eyelets. The diamond quilting provides excellent padding without restricting mobility. The finely quilted collar adds extra comfort around the neck. Included leather laces allow for easy attachment of additional parts. Included are the vest, the tassets and the two matching sleeves. Material: 100% cotton, polyester (padding) Arthur gambeson vest S M L XL XXL 3XL Total length 57 64 66,5 69 70 70 Breat circ. 90 114 124 128 144 160 Waist circ. 86 110 120 124 142 156 Hip circ. 92 116 124 134 146 172 Arthur accessories S M L XL XXL 3XL Length tassets 31 33 33 35 39 39 Sleeve length 51 56 62,5 63,5 67,5 71,5 Total length with tassets 91 93 96 100 105 110 All measurements are in cm. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.
Arthur gambeson set suede
The long Arthur gambeson is a diamond-quilted vest that perfectly combines protection and freedom of movement. It is fastened at the front with four roller buckles, while the matching sleeves and tassets can be laced on using brass eyelets. The diamond quilting provides excellent padding without restricting mobility. The finely quilted collar adds extra comfort around the neck. Included leather laces allow for easy attachment of additional parts. This set is really something special: our "Arthur" series gambeson made from suede - just for you. Included are the vest, the tassets and the two matching sleeves. All of this made from suede, padded in polyester and lined with thin cotton material. Material: suede, polyester, cotton Arthur gambeson vest S M L XL XXL 3XL Total length 57 64 66,5 69 70 70 Breat circ. 90 114 124 128 144 160 Waist circ. 86 110 120 124 142 156 Hip circ. 92 116 124 134 146 172 Arthur accessories S M L XL XXL 3XL Length tassets 31 33 33 35 39 39 Sleeve length 51 56 62,5 63,5 67,5 71,5 Total length with tassets 91 93 96 100 105 110 All measurements are in cm. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.
Arthur padded bracers
The matching bracers from our "Arthur" series.The bracers are backstiched in diamond-shape and provide a maximum in movability therefore, without minimizing the effect of padding.They are closed with two buckle-straps and can be adjusted to the wearers body individually.Material: canvas, polyesterUnisize/adjustableColours: brown and black
Arthur padded coif
This is the matching padded coif from our "Arthur" series.The coif is available in three sizes and therefore fits most heads. We suggest to wear it underneath coifs of mail or helmets. This maximizes the comfort wearing them and prevents bruises and scratchmarks.Material: Canvas, PolyesterSizes: S, M, LColours: brown and black S: up to approximately 60 cm head circumferenceM: up to approximately 63 cm L: up to approximately 70 cm The hood is approximately 0.5 cm thick.
Arthur padded collar
The collar "Arthur" matches the entire series.It is backstitched in diamond-shape and adjustes to the wearers body very comfortably. The upper part is backstitched in smaller shapes, which brings a plus in movability around the neck.The collar is closed with a single buckle-strap in the front.Material: Canvas, PolyesterUnisize/adjustableColours: brown and black
Arthur padded greaves
These are the matching greaves from our "Arthur" series. The greaves are backstiched in diamond-shapes and therefore very flexible when moving. The padding-effect is not neglected, but instead maximized by a plus in material. The two buckle-straps allow an individual adjustment to the wearers bods. Material: canvas, polyester Unisize/adjustable
Arthur padded sleeves
The matching sleeves to our padded vest "Arthur". The sleeves are backstiched in diamond-shape, which maximizes movability. The inner part of the elbow is made without padding, the outer part has an extra pad for protection. The lower arm can be tied with a string to close it individualy. The seams are sewn with an extra cotton seam, which provides more comfort while wearing it. Material: canvas (100% cotton), polyester (padding) Arthur sleeves S M L XL XXL Sleeve length 60 64 64,5 66,5 66,5 Sleeve width 21 21,5 22,5 23,5 29 All measurements are in cm. These are the external dimensions. Our products are handmade; dimensions and colours may therefore differ slightly.
Arthur padded vest
The padded vest "Arthur" is backstitched in diamond-shape and closed by four buckle-straps in the front. The sleeves and the seam on the bottom is riveted with brass eyelets, which allows the tassets and the sleeves to be combined with the jacket.The diamond-shaped backstitching povides an extra in movability and, at the same time, keeps up the padding, which avoids bruises and scratches. The collar is backstitched in smaller diamonds: this brings more comfort to the neckarea. Material: 100% cotton, polyester Arthur gambeson vest S M L XL XXL 3XL Total length 57 64 66,5 69 70 70 Breat circ. 90 114 124 128 144 160 Waist circ. 86 110 120 124 142 156 Hip circ. 92 116 124 134 146 172 All measurements are in cm. These are the external dimensions. Our products are handmade; dimensions and colours may therefore differ slightly.
Arwin jerkin nappa leather black
The Arwin jerkin combines rustic charm with robust wearing comfort. Its classic design is perfect for combining and customizing. The skilful cut ensures freedom of movement in battle. Ideal for every adventurer, ranger or warrior in LARP but also a relaxed visit to the medieval market.Our products are made by hand, so dimensions and colours may vary slightly. Photographic images and screen settings may not realistically represent colour tones.