Adam bracers
Our "Adam" bracers are a little bit shorter than their cousins from our other series. Because of this they will also fit adolescents or smaller people. Additionally, like all the other "Adam" armour parts, it has a corrugation along the rim.Material: 1.2mm steelColour: blank, brownedMeasurements: 20cm length, 17cm on top, 13cm on the bottom
Adam guard set
We offer you the "Adam" guard set, consisting of bracers & greaves for a discounted set price. Material: 1.2mm steel
Balthasar bracers
As with all other products from the "Balthasar" line, these bracers have a rim decorated with rivets. The combination of a rounded outline and decorative elements make them look both noble and warlike. Material: 1.2mm Steel Length : 23cm Width top: 18cm Width bottom: 14cm Weight (Pair): ca. 1,0 kg
Balthasar full armguard
The armguard from the "Balthasar" series is very elaborate and is made up of nine flexibly connected segments. This ensures maximum agility in combat. With the ornamental rivets and beading typical of the "Balthasar" series, the armguardr is well suited to complement a "noble" armor. Each Mytholon shoulder armour has a belt on its underside in which this armguard can be mounted. In this way, various combinations and armament concepts are possible. Material: SteelColours: blank, brownedLength: 46 cmWeight: 3,8 kg
Balthasar guard set
We offer the "Balthasar" bracers & greaves for a discounted set price. Material: 1.2mm steel Size greavesLength: 35 cm Width: 23 cm Weight (Pair): ca. 1,5 kg Size bracers Length : 23cm Width top: 18cm Width bottom: 14cm Weight (Pair): ca. 1,0 kg
Elias full arm guard Discontinued
Discontinued, only while stocks last This full arm plate armour from our series "Elias" protects from shoulder to the wrist. It has a joint on the elbow and is therefore very moveable.The offer does not include the gorget and shoulders.Material: 1.2mm steelColour: blankSold as a pair.All other articles from our \\"Elias\\" series can be found here.
Fafnir padded bracers
The bracers "Fafnir" consist of three fixed riveted segments. A wrist guard, an extra padded segment to protect the elbow and the actual bracers. With their curved lines and the wide beading, the bracers look sleek and elegant, with maximum protection. Due to the overlapping segments, they are very stable and do not deform even in the case of heavy duty. Like all the armor of the "Fafnir" series, these bracers are also equipped with padded suede upholstery. This increases the wearing comfort considerably and also protects against bruises. They are closed with sturdy leather straps and roll buckles on the back. Armours of the "Fafnir" series are not only for characters with "Nordic" background a decent protection. Adventurers, knights, soldiers and many other armour wearers also benefit from their good protective effect and maximum wearing comfort. Material: 1,2 mm steel, suede, polyester Length 33 cm Weight 1.7 kg
Georg bracers
A pair of nicely detailled bracers. The cut away part leaves a nice asymetrical shape. This cut ensures the bending of the arm completly. Good movement is important, when dressed in plate metal. The deep ridge along the edge and the rivets along the bordering leave a distinctive style visible. They are being closed with a pair of straps and buckles in the back. Well decorated, jet made for practical use, this is a nice pair of bracers. Material: 1.2mm steel Measurements: Length: 26cm; Width: 21cm/17cm
Gustav plate arm guard
All our products from the "Gustav" series combine simple design and functionality at a great price performance ratio. This series of low cost plate armour gives you the opportunity to arm yourself without spending lots of money. Its design suits many different character concepts and therefore you will be able to use it over and over again for many years. It is also great for medieval fairs and historic events.The armguards are attached to the spaulders with a leather strap on the inside. Three further buckle straps are used to fix them to the wearers´arm. Their position can be varied by the shoulder strap and thus adapted to the wearer individually. The simple round cowter can easily be decorated with heraldic symbols. The armguards can also be combined with spaulders and gorgets from our other series of plate armour.Material: 1.2mm steelColour: blank or browned
Harald bracers
A pair of bracers with central bending.Looking quite like the "Georg" series' bracers, we left the rivets and additional beading along the ridge be and offer a central bending instead. This allows the material to be less fexible and being more stiff along the longside.They are being closed around the forearm by two buckle-straps.Material: 1.2mm steelLength: 27cmWidth: 22cm/17cm
Katharina Bracers
The bracers of the Katharina armour are designed with a shorter length, seamlessly aligning with the elbow tile of the modular arm guard. They are adorned with a graceful curved element, mirroring the design found on the greaves and tassets. These bracers are also available in an economical set with the greaves.All components of this armour are naturally flanged to ensure safety for you and your fellow participants. The inner parts have been painted to protect against rust, although this paint may peel over time. We recommend regular maintenance with oil, such as the Ballistol available from us.Material: Steel Length (Side): 17.5 cm Length (Center): 22 cm Width (Wrist): 11.5 cm
Lambert bracers
The bracers of our “Lambert” series feature a curved beading and have a cutout for the crook of the wearer’s arm. That way, they won’t hinder the wearer’s movements in combat and are comfortable to wear. Like all parts of the “Lambert” series, these bracers combine functionality with an elegant design. We recommend wearing a padding or arm wraps underneath the bracers to increase wearing comfort and avoid bruises and abrasions. Material: steel, leather Width: 18cm Length: 25cm Weight: approx. 0.5kg
Lucas bracers
The products from our "Lucas" series are specially designed for the young heroes. They look like the ones for adults but are cut a lot smaller. Additionally we put a lot of emphasis on flexible sizes so that they can "grow" a little bit with the young wearers. The bracers are designed similar to our bracers "Adam" but are cut smaller. They are closed with two buckle straps on the back. To make them fit to the wearer´s arms you can also carefully bend them a little bit. Material: 1mm steel
Markward bracers
Like all parts of our "Markward" series, these bracers are simple in design, but look lean and elegant just like the "Markward" greaves. This impression is enhanced by a burr along the midsection. Additionally the burr strenghtens the steel construct.Material: 1.2mm SteelColour: blank, brownedMeasurements: 25cm length, 20cm on top, 14cm on the bottom
Markward full armguard
This seven piece full armguard matches and completes the "Markward" series. Upper arm and forearm are, each, safely wrapped in a full steel tube, which is closed by using a buckle-strap. This way they are well protected from blows to the bone. The elbow has a matching guard, which goes along the entire "Markward" series. The full armguard can be adjusted to consisting armour without any problems.Material: 1.2mm steelColours: blank, brownedLength: 52 cm Upper arm circumference: 37,5 - 44,5 cmElbow circ.: 33 - 41 cm Lower arm circ.: 31 - 38 cm Wrist circ.: min. 23 cm
Markward guard set
Steel bracers and greaves not only protect your depicted character from the attacks of your enemies, they also protect you quite real when recreational heroines and heroes on castles and forests experience their adventures. Underbrush and stones can quickly cause bruises during outdoor activities. With this set, shins and forearms are protected against it. We offer you here the ' Markward ' set consisting of the bracers and the greaves in blank. With its slender lines and the simple design it fits well with all armour wearing costume ideas. Material: Steel Dimensions of Bracers: Length: 25 cm Width: 20 cm top, 14 cm bottom Weight. 900 g Dimensions of the greaves: Length 25 cm Width 20 cm top, 14 cm bottom Weight: 1.8 kgs We always recommend to wear pads under plate armour. This increases the wearing comfort and the protective effect enormously.
Mina bracers
With their curved cut and the simple beads, the "Mina" bracers are designed to match our "Mina" armour set. They are comfortably worn, even on shorter forearms. A generous elbow cutout ensures a lot of freedom of movement. Their long tip on the backside makes them look slim and petite without disturbing in battle. Material: Steel with 1.2 mm thickness Length: 23 cm Width at the front 8.5 cm Width at the back 15 cm
Nova bracers
The bracers of the "Nova" armor provide reliable protection for the forearm. Their ergonomic shape ensures a comfortable fit, while the sturdy leather straps with buckles allow for a secure fixture and adjustable size. The asymmetrical design, with an extended outer side, offers additional protection for particularly exposed areas of the arm. The "Nova" was designed with great attention to detail in terms of shape and proportions. The result is a versatile piece of armor that impresses with its flowing lines and aesthetic elegance, providing you with maximum comfort and mobility.Material: Steel, LeatherLength: 24 cmWidth (top): 16.5 cmWidth (bottom): 12.5 cmOur products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not represent colours accurately.
Nova elbow
Like all parts of the “Nova” armour, the elbow guard stands out with its elegant and well-shaped design, suitable for both intense combat and more refined adventure concepts. The “Nova” was developed with great attention to detail regarding form and proportions. The result is a versatile piece of armour whose curved lines and aesthetic appearance offer a high level of comfort and mobility. The Nova elbow guard can be attached to the Nova upper arm guard using its suspension loop, for example with a leather cord. Of course, you can also mount it on a gambeson or a piece of chainmail. The additional strap secures the elbow in the crook of the arm. This provides a practical extension to the Nova armour while allowing you to combine the elbow guard with many existing armour parts and garments.Material: SteelNote: A leather strap is not included, but can be added easily via our convenient bundle function.
Nova upper arm with strap
Like all parts of the “Nova” armour, the upper arm guard impresses with its elegant, well-shaped design, suitable for both intense combat and more stylish adventure concepts. The “Nova” has been developed with great attention to detail regarding form and proportions. The result is a versatile piece of armour whose curved lines and aesthetic appearance offer a high level of comfort and mobility. The upper arm guard can be attached to the Nova shoulder and to any other Mytholon shoulder suspension using the included strap. To do this, pull the strap’s loop over the fastening buckle of the shoulder piece and then attach the shoulder as usual. The height of the upper arm can be adjusted individually. The Nova upper arm guard also features an attachment point for the Nova elbow guard.Tip: The strap is long enough to add additional armour parts, such as a full arm harness. If you do not need this, you can shorten the strap as required. Material: Steel, leather
Ortwin rerebrace antique finish
The rivets emphasise the armour's shape and are a nice detail. The rerebrace is attached to the spaulder using the downward-pointing strap end, where its height may be adjusted. We recommend wearing a padded vest/gambeson underneath the armour to increase wearing comfort and to better protect yourself against injuries or chafing. Material: steel, leatherRerebrace:Length: 50cmCircumference: 45cm
Ragnar bracers
These bracers were made following historical nordic patterns and examples.The five single steel strips were riveted onto two leather strips and are closed by using the two wrought iron buckle-straps.The parts around the wrists are bent outwards to ensure a free movement of the wrist.Material: 2mm steelColour: blank/antiquedLength: 25,5cm, Width: 15,5cm(Top)
Vigor vambraces
Our "Vigor" armour was designed for the more imposing characters on the battlefield – referring not only to their formidable fighting style. This armour set’s generous dimensions make it comfortable for longer periods of time even for powerfully built warriors of both genders. However, a small tweak in design also allows adjusting "Vigor" to slender people. To do so, you simply have to remove the central tasset from the armour belt and, if necessary, shorten the belt. In so doing, you can improve the fit for wearers with slimmer hips. The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of tabletop miniatures. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn, but well-cared-for character. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand, it is unique for every single armour. However, if you’d prefer your armour unburnished, you can also easily remove the burnishing layer using a soft abrasive fabric.The vambraces are rather slender in comparison to the rest of the armour parts. For that reason, they will not hinder you when carrying a shield. They consist of three slightly curved segments and feature a comfortable cutout for your hand as well as slightly bent edges around the wrist, which significantly increase wearing comfort. It goes without saying that all edges of these armour pieces are beaded. Material: steel, leatherVambraces: Length: 34cm Circumference (upper strap): 24cm Circumference (lower strap): 13cm Weight (pair): approx. 1.5kg The parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight. Adjustments to several of the measurements are possible by carefully bending the respective armour parts.
Vladimir bracers
The "Vladimir" bracers consist of curved segments and have additional hand and elbow protection. The inner side of the arm is also protected by a flexible segment. The hand protector is flexibly connected to the forearm and thus hardly hinders the wearer in combat. Material: 1.2 mm steelLength 42 cmWeight 2.6 kgColour: blank, browned