Adam breastplate
Our breastplate "Adam" is something special. Its design was inspired by the first complete breastplates from the 14th century. Metal lamellae protect the sides and the lower back.This piece of armour is fastened by two buckles on the backside. Maybe you take a look at our Padded Jackets to wear them underneath your Armour. This maximizes the comfort wearing it.You might want to consider a combination with a Chainmail Shirt? Material: 1,2mm steelColour: blank, browned
Balthasar torso armour
The torso armour from our "Balthasar" series consists of two pieces: the chest and the back plate. Both are connected with a strap on each side and a strap on either side of the shoulders. That allows an individual adjustment for each wearer. The chest plate is made from seven seperate segments which are riveted to each other. Its moving parts underneath the arms allow a free movement and agility of the wearer. The elaboratly made back plate is rigid and decorated with lots of rivets. The lower two segments are moveable and allow a bending of the upper body. The matching big spaulders can be attached to the shoulders of the armour. Rolling shapes and segments, just as the offset bordering and the decoration with rivets, add structure and character to this great armour. We suggest to wear a padded gambeson underneath all metal armours to avoid scratches and bruises on the body. This adds lots of comfort when wearing the armour. Material: 1,2mm steel Circumference (chest): app. 115cm to 130cm Length: 72cm Neck: 21cm Weight (chest): app. 4,2kg Weight (back): app. 4,4kg
Elias torso short blank Discontinued
The short breastplate from the "Elias" series is kept simple and functional. The chest and back plate are connected by flexible leather pieces on the shoulders. This not only increases the mobility, it also allows a quick fitting and displacement of the armor. Of course, this armor also has suspensions for spaulders. It is closed with straps on the sides by which the size can also be adjusted. Thanks to its plain and simple straightness, the short breastplate "Elias" is very suitable for guards, soldiers or mercenaries. It is also a good base to build a heavy armor on it. Material: SteelWeight: approx. 2 kgColor: blank
Fafnir brigandine
Our "Fafnir" body armour is something really special. Metal plates have been riveted on a backing of padded suede. Especially the comfort of the wearer and the feasibility of putting on a complete suit of armour in a few minutes were our goals. Because of this there is no need to wear a gambeson or a similar garment.You have the choice between three different adjustments which you can make yourselves. The different parts of the armour are connected by leather straps. The three different sizes are achieved by pulling these straps through eyelets. Additionally, you can omit some parts of the armour, eg. the shoulder parts or the thigh protectors.In our opinion, the browned version of the "Fafnir" armour is specially suited to be used as armour for dark and evil NPCs, because they won`t need much time to arm themselves. Material: Suede, Leather, SteelLength: 96-107 cmBreast circ.: 104-114 cmShoulder width: 52 cmArm length: 27 cmWeight: ~12kgLeather is a product of nature and may take dyes differently. The actual hue may differ from the image.
Friederich abdominal armour blank
This simple abdominal armour is perfectly made for combination purposes. Its being closed with a single buckle strap in the back. This way we ensure to make it very comfortable to put on and off by yourself. Looks good when combined with a shirt of browned chainmaille and/or a dark padded jacket. We suggest it as part of a Landsknechts' costume. It is closed with a buckle in the back.Material: 1,2 mm steelWidth: 40 cmHeight: 25 cm
Galahad torso armour
Chest and back plate form a torso armour. Adding both pieces from the "Galahad" series, you´ll get an impressive body plate armour.The two parts are linked by using the straps on the shoulders and are closed on each side additionally. The wearer is strapped into this armour and is supported very comfortably.Shoulders and tassets, just as well as the small belt shield can be added to form a complete armour for the heavy infantry man.The armour is available in blank only.Material: 1,2mm steelColour: blankSize: onesize, adjustable on shoulders and on the sides
Georg cuirass
The Cuirass "Georg " is a very special armour. Made of 1.2 mm thick steel, it is decorated with curved beading and rivets. Two flexible moveable protect the abdomen. flexibly connected side elements protect the flanks. Together with the "Georg" gorget, which can be hooked into the buckle on the chest, the cuirass is a very flexible and efficient armour for the upper body. The wide shoulders and the elegant leg pockets of the series complement the Cuirass "Georg " optimally and result in an armor that guarantees excellent protection with maximum mobility. Material: 1.2 mm steel Length: 41 cm Width: 41 cm Circumference: approx. 130 cm Weight 3, 5 kg
Gustav breastplate
All our products from the "Gustav" series combine simple design and functionality at a great price performance ratio. This series of low cost plate armour gives you the opportunity to arm yourself without spending lots of money. Its design suits many different character concepts and therefore you will be able to use it over and over again for many years. It is also great for medieval fairs and historic events.The torsoplate is composed of three inflexible pieces. The middle part with its sloping edges and the rivet decoration makes for a nice eye catcher. It is closed crosswisely with two leather straps on the back and is therefore quite variable in its size.Material: 1.2mm steelWidth: 54 cm
Kaspar torso armour
The "Kaspar" torso armour is the heart of this rider's armour. A sliding combination of two plates allows the wearer to sit down; the torso armour features straps for attaching the matching "Kaspar" tassets. The neckhole is extremely wide as the "Kaspar" collar is intended to be worn underneath this torso armour. We recommend wearing it in combination with a padded gorget or a gambeson. Material: 1.2mm steel Waist Circumference 108 - 120 Chest Circumference 125 - 140 Shoulder to Waist Length 60 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.
Lambert torso armour
The torso armour of our “Lambert” series features a plain and functional design. It consists of a breast plate and a back plate that are connected by adjustable shoulder straps. The straps on both sides may also be used to adjust the size. The backplate comprises two parts and has a movable lower segment. This serves to considerably increase wearing comfort and mobility. Unlike the other parts of the “Lambert” series, the torso armour is not ornamented in any way, meaning it can also be universally combined with other armour series and outfits. We recommend wearing a gambeson jacket or padded collar underneath the torso armour to increase wearing comfort and avoid bruises and abrasions. Material: steel, leather Width: 37cm Length: 35cm Weigth: approx. 3.5kg
Lena chest plate
The chest plate from our "Lena" series was built for a cup size of "B" to "D". It consists of three pieces: the two cups for the front and the back plate.The two cups are held together by a leather strip and are attached to the back plate with four buckles. This way it can be adjusted to the wearers body individually.Being worn directly on the top layer of clothing it can improve many differernt costumes and character ideas.Material: 1.2mm steelColour: blankSize:S-M: up to B cup, breast circ. 85-107 cmL-XL: up to D cup, breast circ. 110-126 cm
Lucas breastplate
The products from our "Lucas" series are specially designed for the young heroes. They look like the ones for adults but are cut a lot smaller. Additionally we put a lot of emphasis on flexible sizes so that they can "grow" a little bit with the young wearers. The breastplate is composed of two inflexible pieces and has an extra short cut. It is closed crosswisely with two leather straps on the back and therefore quite variable in its size. Additionally you can bend it carefully to make it fit to the young wearers circumference. Material: Sheet steel 1mm Color: blank or burnishedDimensions: Total length from shoulder 38 cm Total width 53 cm
Markward torso armour
The torso armour "Markward" is a classic cuirass and consists of a chest- and a back plate. The two parts are connected with sturdy leather straps and roll buckles. You can also adjust the size of the torso armour individually. The torso armour does not have its own suspension for spaulders. An additional gorget must be used for such an extension. With its curved lines and the decorative rivets, this cuirass is ideal for building an armor with a well-wealthy character without becoming ' ostentatious '. It is well suited for knights and officers, but also for successful adventurers and wealthy mercenaries. Material: SteelColor: shiny, burnishedWeight: approx. 3 kgLenght: 37 cmChest circumference: 118 cmWaist circumference: 116 cmShoulder width: 27 cm
Mina chestplate
The Mina breastplate features a clear, functional design and is decorated with edge flanges and rivets. The shaped cups of the breastplate correspond approximately to size B. It is not intended to be worn directly on the body, but is designed to be worn over a gambeson or a mail shirt. The construction lightly supports the chest from below without fully enclosing it. The breastplate is of a two-piece construction and is connected to a smaller back plate by straps. This allows the size to be adjusted individually.Material: 1.2mm steelColour: blank, browned
Mortimer cuirass
The cuirass "Mortimer"; is based on breast plates of the 15th century. It consists of two parts that are flexibly connected to each other. This considerably increases mobility and wearing comfort. "Mortimer" is closed with a cross strap on the back and a belt. Fit and size can be optimally adjusted. This cuirass is perfect for military characters like mercenaries, lansquenets and soldiers. Of course it can also be worn by knights and adventurers. As always, it depends on the combination with other armour and garments. For more wearing comfort we recommend to wear a gambeson underneath. Material: steel 18 gauge (1,27 mm) Dimensions:Length (center neckline): 54 cmCircumference: 64 cmLength belt: 70 cm
Nova torso armour
The „Nova“ torso armour for female warriors combines functional flexibility with elegant design. It consists of a front and back piece that can be individually adjusted to the body size and shape using side buckles. The shoulder straps allow for precise height adjustment of the chest, ensuring the armour always fits comfortably. Particularly noteworthy are the flexible sides, which adapt perfectly to the wearer’s body contours, providing an excellent fit. Additionally, the armour features three movable segments in the lower body area, offering even more freedom of movement and comfort. The „Nova“ was developed with great attention to detail in terms of shape and proportions. The result is a versatile armour that impresses with its curved lines and aesthetic elegance, offering maximum comfort and mobility. You can expand the armour with additional „Nova“ pieces or combine it with other Mytholon armour parts.Torso plate dimensions: Width at Breast Height56.75Length from Shoulder to Underbreast29Width Under the Breast55Width of Neckline17Width of Shoulders29Length of Torso Side20.5Length of Torso Side with Belt24.5 Back plate dimensions: Length of Outer Sides20.5Length of Centre Back23.5Length of Inner Sides21.5Total Width at Bottom Edge48Total Width at Top Edge46 All measurements are in cm. Our products are handmade, so measurements and colour tones may vary slightly. Photographic images and screen settings may not accurately represent the colours.
Ortwin torso armour with collar antique finish
Our "Ortwin" torso armour is closed by means of buckles and straps on the sides, so its width is easy to adjust. The generous cut-outs around both arms offer great freedom of movement, while a flexible stomach ring consisting of two segments protects the wearer's lower torso. The rivets emphasise the armour's shape and are a nice detail. The included collar is attached in the chest area by means of straps at the shoulders as well as two leather strings. The stomach ring features two straps for attaching the matching tassets. The spaulders can also be attached to the torso armour using straps. We recommend wearing a padded vest/gambeson underneath the armour to increase wearing comfort and to better protect yourself against injuries or chafing. Material: steel, leather Torso:Length of torso armour: 60cmChest width: 62cm Collar:Length of collar: 16cmWidth of collar: 34cm
Rikomer torso armour
The "Rikomer" plate armor is the brother of our "Dragomir" armor. Elaborately manufactured, it consists of a large number of lames and elements that, when combined, result in an extraordinary armor that can hardly be more agile. Every part from Rikomer is carefully flanged and coordinated with one another. Unlike "Dragomir", this armor is not decorated with beads and thus has an uncompromising, brutal look that contrasts with the finely shaped parts. Rikomer impresses with its design and the masterful execution that makes this armor so unique. It is also a more affordable than its brother "Dragomir". Armor like this is usually only available as a custom-made product and we had to fiddle a long time before we could get it ready for serial production. Of course, the fit must and can be optimized here and there by careful bending, but we have designed the armor in such a way that it can be carried into the field with maximum comfort. The individual parts are burnished to protect them from rust, making the Rikomer burnished particularly suitable for dark knights and fighters of chaos. We generally recommend wearing a gambeson and arm and leg paddings under plate armor. This significantly improves wearing comfort and protection. Material: steel, leather Size M Height: 53 cm Chest circ.: ca. 105-120 cm Weight: 8 kg Size L-XL Height: 60 cm Chest circ. : max. 135 cm Hip circ.: max. 130 cm Weight: 10,5 kg
Vigor torso armour
Our "Vigor" armour was designed for the more imposing characters on the battlefield – referring not only to their formidable fighting style. This armour set’s generous dimensions make it comfortable for longer periods of time even for powerfully built warriors of both genders. However, a small tweak in design also allows adjusting "Vigor" to slender people. To do so, you simply have to remove the central tasset from the armour belt and, if necessary, shorten the belt. In so doing, you can improve the fit for wearers with slimmer hips. The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of tabletop miniatures. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn, but well-cared-for character. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand, it is unique for every single armour. However, if you’d prefer your armour unburnished, you can also easily remove the burnishing layer using a soft abrasive fabric. At the heart of "Vigor" is the broad torso armour, which the large bevor can be attached to using buckles. The torso armour consists of flexibly connected chest and back plates. The lower parts protecting the chest and back consist of moving plates. Two straps on either side are used to close the torso armour and adjust the fit. It goes without saying that all edges of these armour pieces are beaded. Material: steel, leather Torso: Chest width: 67cm Length (shoulders to lower segment): 55cm Width neck cutout: 18cm Weight: approx. 5.3kgThe parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight. Adjustments to several of the measurements are possible by carefully bending the respective armour parts.
Vladimir torso armour
An impressive looking torso armour composed of many flexible segments. These interlocking components leave a lot more freedom of movement to the wearer than normal torso plates and make it less obstructive in battle. Material: 1,2mm steel Torso consisting of chest and back. Total chest circumference: 115,5 - 145,5 cm Chest armour Total length: 53 cm without shoulder straps Width of waist strap: 59 cm plus 15 cm straps on each side Chest width: 32 cm Back armour Total length: 62 cm without shoulder strap Belly width: 56.5 cm Width at the upper back: 31.5 cm