Katharina arm guard with spaulders
The arm guard of the Katharina armour is a modular set and already includes the spaulders. You can decide whether you want to wear only the spaulders, the spaulders with an additional upper arm segment or as a complete arm guard together with the shaped elbow tile. All segments are connected with straps and buckles, so you can adjust the arm guard optimally to your arms. Of course, all parts of the armament are flanged to ensure the safety of you and your fellow players. On the inside, the parts have been painted to protect against rust. This varnish can peel off over time. We recommend regular care with oil, e.g. with Ballistol, which is available from us. Material: Steel, LeatherLength top shoulder plate: 19cmWidth top shoulder plate: 31 cmLength entire spaulder: 40 cm to 26 cm (adjustable)
Katharina armor belt and tassets set
For optimal mobility of the Katharina armour and a good fit, we have separated the upper and lower parts of the torso armour. The Katharina armour belt forms the lower part of the torso and is worn beneath the breastplate. It is secured with a broad leather strap at the back, allowing for individual adjustment of size by both the strap and careful bending. The four front straps of the belt are used to attach the tassets, allowing for optimal adjustment of their height and angle. They continue the distinctive curved design characteristic of this armour, providing a visually cohesive finishing touch. All components of this armour are flanged to ensure safety for you and your fellow players. To prevent rust, the inner parts have been painted. However, this paint may peel over time. We recommend regular maintenance with oil, such as the Ballistol available from us. Material: Steel This set includes the armour belt and a pair of tassets . Measurements of the armor belt: Width center front: 22,5 cm Width side: 9,5 cm Length metal: 66 cm Entire length: 83 cm - 115 cm Measurements of the tassets: Length: 29 cm Width top: 18 cm
Katharina armour set
Our Katharina armour has been specially designed for female warriors who value functionality and agility. It is a relatively lightweight plate armour, ideal for fast-paced battles and skirmishes. The contoured breastplate is divided into three movable segments, just like the backplate. This allows the torso to perfectly conform to the body shape. The height of the backplate can be adjusted using the shoulder straps. To prevent the Katharina armour from pressing on the hips, we have kept the upper torso shorter and widened the belt accordingly. Worn beneath the torso, the belt forms a fully flexible lower-body armour. The large tassets effectively protect the thighs. We have paid special attention to the combination of spaulder and arm guard. These components form a modular system in the Katharina set. You can wear the segmented spaulders individually as a lightweight shoulder armour, or you can expand it with an upper arm segment. You can adjust the distance between the shoulder segment and the upper arm segment to your liking. This segment also serves to attach the contoured elbow tile, with the distance being individually adjustable as well. This customization provides you with an arm guard that can be precisely tailored to your arm, almost like a custom fit. The bracers and leg greaves have a classic round shape and do not snag on other armour pieces. They, along with the tassets, are adorned with a curved decorative segment. With the Katharina armour set, you can implement a variety of concepts, from lightly to heavily armored. The finish is polished, making it the first of our armors that you can proudly wear with this unique shine onto the battlefield. All components of this armour are naturally flanged to ensure safety for you and your fellow participants. The inner parts have been painted to protect against rust, although this paint may peel over time. We recommend regular maintenance with oil, such as the Ballistol available from us. Material: Steel, Leather Measurements Torso: Length: 50 cm Neckline opening: 21 cm Measurements Armor Belt: Width center front: 22,5 cm Width side: 9,5 cm Length metal: 66 cm Entire length: 83 cm - 115 cm Measurement Tassets: Length: 29 cm Width top: 18 cm Measurements Arm Guard: Length top shoulder plate: 19cm Width top shoulder plate: 31 cm Length entire spaulder: 40 cm to 26 cm (adjustable) Measurements Bracers: Length Side: 17,5 cm Length center front: 22 cm Width at wrist 11,5 cm Measurements Greaves: Length Side: 26 cm Length center front: 33,5 cm Width at ankle: 12 cm
Katharina Bracers
The bracers of the Katharina armour are designed with a shorter length, seamlessly aligning with the elbow tile of the modular arm guard. They are adorned with a graceful curved element, mirroring the design found on the greaves and tassets. These bracers are also available in an economical set with the greaves.All components of this armour are naturally flanged to ensure safety for you and your fellow participants. The inner parts have been painted to protect against rust, although this paint may peel over time. We recommend regular maintenance with oil, such as the Ballistol available from us.Material: Steel Length (Side): 17.5 cm Length (Center): 22 cm Width (Wrist): 11.5 cm
Katharina bracers and greaves set
The bracers and greaves of the Katharina armour are crafted in a classic, rounded style. They are adorned with the characteristic curved elements, which are also found on the tassets of Katharina. All components of this armour are naturally flanged to ensure safety for you and your fellow players. The inner parts have been painted to protect against rust, although this paint may peel over time. We recommend regular maintenance with oil, such as the Ballistol available from us. Material: Steel This set includes one pair of arm guards and one pair of leg guards. Measurements Bracers: Length Side: 17,5 cm Length center front: 22 cm Width at wrist: 11,5 cm Measurements Greaves: Length Side: 26 cm Length center front: 33,5 cm Width at ankle: 12 cm
Katharina Greaves
The Katharina greaves feature a classic cut adorned with a graceful curved element, echoing the design found on the bracers and tassets of the Katharina armour. They are secured with two sturdy straps, allowing for adjustable sizing. All components of this armour are naturally flanged to ensure safety for you and your fellow participants. The inner parts have been painted to protect against rust, although this paint may peel over time. We recommend regular maintenance with oil, such as the Ballistol available from us. Material: Steel Length Side: 26 cmLength center front: 33,5 cmWidth at ankle: 12 cm
Katharina Tassets
The tassets of the Katharina armour are fastened to the straps of the armour belt with buckles. Their height and angle can thus be optimally adjusted. They continue the curved design typical of this armour and visually round off this set. The tassets can also be combined with other armour belts and torsos from our range, such as Lambert, Galahad, Edward and Georg. Material: SteelLength: 29 cm Width Top: 18 cm
Katharina Torso
The torso of the Katharina armour has been meticulously designed for agility and comfort, featuring an intricately shaped, three-part breastplate and an equally flexible backplate. Its short cut allows for comfortable torso movement without exerting pressure on the hips. The backplate seamlessly conforms to your body shape, covering the lower back and securing with two leather straps on each side. Broad shoulder straps connect the two elements, providing adjustable height. Along with the movable side panels of the breastplate, the torso can be individually adjusted to your size. The modular arm guard with the spaulders is attached to the torso with shoulder buckles. Wear the armour belt with leg pockets freely underneath. Thus, the torso forms the core element of the Katharina armour. Wear it alone as a lightweight cuirass or as part of the complete set, adapting to your preferences and style. All components of this armour are naturally flanged to ensure safety for you and your fellow participants. The inner parts have been painted to protect against rust, although this paint may peel over time. We recommend regular maintenance with oil, such as the Ballistol available from us. Material: Steel, Leather Length: 50 cm Neckline opening: 21 cm
Lena armour belt
Our "Lena" armour series was especially designed for warrior princesses and shield maidens alike. We distanced from historical patterns and steped closer to a rather fantastic shape. The outcome was a not only a long awaited womens armour, but also a costume set of in the form of a worthy armour set. Be it an Amazone, a warrior princess or an exalted priestess - all of them are possible by combining the armour with the right clothing pieces...Only your imagination limits the possibilities. For all you ladies out there: this is the right armour, not only on LARP events.The "Lena" series belt is elaboratly made: it is worn on the hip and is closed with a single buckle in the back. Two segments make up this belt basically, which is fitting by its swung lines. The attached tassets are made from two pieces each and riveted to a leather strap, which is attached to the belt with rivets as well. All rivets are made from brass and complement the silvery shine of the blank armour additionally. The central shield is movable, holding the side parts of the belt, and covers the lower abdomen.All points are beaded to avoid injuries when wearing it.Material: 1.2mm steelCircumference: from 70cm to 90cmAnnotation: By enlongening the belt strap you can enlarge not only the length alone: bent the metal parts slowly and carefully to achieve a bigger circumference.Length of the tassets: app. 25cmWeight: 1.7kgColour: blank
Lena chest plate
The chest plate from our "Lena" series was built for a cup size of "B" to "D". It consists of three pieces: the two cups for the front and the back plate.The two cups are held together by a leather strip and are attached to the back plate with four buckles. This way it can be adjusted to the wearers body individually.Being worn directly on the top layer of clothing it can improve many differernt costumes and character ideas.Material: 1.2mm steelColour: blankSize:S-M: up to B cup, breast circ. 85-107 cmL-XL: up to D cup, breast circ. 110-126 cm
Lena choker
Our "Lena" armour series was especially designed for warrior princesses and shield maidens alike. We distanced from historical patterns and steped closer to a rather fantastic shape. The outcome was a not only a long awaited womens armour, but also a costume set of in the form of a worthy armour set. Be it an Amazone, a warrior princess or an exalted priestess - all of them are possible by combining the armour with the right clothing pieces...Only your imagination limits the possibilities. For all you ladies out there: this is the right armour, not only on LARP events.The "Lena" neck choker is armour and accessory at the same time. It finishes off the "Lena" armour to the top and enlongens the wearers neck. This way the female warrior appears longer and the elfen princess even more raised. The buckle on the backside and a slight, carefull bending allow the chocker to be adjusted even to larger necks by the wearer individually. The chocker is being worn on top of the gorget and does not need any additional attachment. The choker can be worn without any armour as a piece of jewllery; this makes this plate armour piece something special for the women.As always: all edges and points are beaded for additional protection.Material: 1.2mm steelNecks circumference: app. 30cm (+ leather strap)Length: 11cmWeight: app. 200gr
Lena gorget
Our "Lena" armour series was especially designed for warrior princesses and shield maidens alike. We distanced from historical patterns and steped closer to a rather fantastic shape. The outcome was a not only a long awaited womens armour, but also a costume set of in the form of a worthy armour set. Be it an Amazone, a warrior princess or an exalted priestess - all of them are possible by combining the armour with the right clothing pieces...Only your imagination limits the possibilities. For all you ladies out there: this is the right armour, not only on LARP events.The "Lena" series gorget appears smaller and more delicate than most other plate metal gorgets. despite of this, it works just as good as a plate spaulder carrier with the two buckle/straps on the sides. It is being closed with a simple strap and can be closed by the wearer when fully armed.You can wear all our spaulders from all series in combination with this gorget.Younger heroes, kids and smaller persons can wear this gorget in a combination with the small spaulders from the "Adam", "Balthasar" and "Markward" series.If your costume creation allows a padded gorget - we suggest to wear padding underneath all metal armour pieces, as this prevents bruises and scratches when being armed.Material: 1,2mm steelNeck circumference: app. 44cmLength of the front segment: 10cmLength of the back segment: 10cmWidth: 27cmWeight: app. 600gr
Lena set
Our "Lena" armour series was designed for female warriors and is very special indeed. We deliberately turned away from historical patterns and towards fantastic designs. The outcome was not only a long desired female plate armour, but a fantastic outfit set in form of an armour. Whether for scantily clad amazone princesses, female elven soldiers or venerable warrior priestesses - it is all about the combination with other outfit pieces... Only your imagination will set the limits! For all those ladies that like to cause a stir, this armour is just the right thing - not only on LARP events. We offer this exciting armour suit in a low-priced set. The breastplate in size "S/M", is suggested for cup sizes up to B, size "L/XL", is suggested for cup sizes up to D. Material: Steel The set includes: 1x Lena armour belt 1x Lena shoulders 1x Lena neck corset 1x Lena collar 1x Lena breastplate S-M/L-XL
Lena spaulders
Our "Lena" armour series was especially designed for warrior princesses and shield maidens alike. We distanced from historical patterns and steped closer to a rather fantastic shape. The outcome was a not only a long awaited womens armour, but also a costume set of in the form of a worthy armour set. Be it an Amazone, a warrior princess or an exalted priestess - all of them are possible by combining the armour with the right clothing pieces...Only your imagination limits the possibilities. For all you ladies out there: this is the right armour, not only on LARP events.The "Lena" series spaulders have an elegant curved upper arm part and a great cut on the shoulder piece by having the blade breakers added on top of them. This stable riveted blade breaker does not only add a martial look to the wearer, but makes the wearer a little wider. A well-fortified look is added to the wearer. All edges and points are beaded for extra protection and comfort for the wearer.Material: 1.2mm steelWidth: 35cmLength: 32cmWeight: app. 2.5kg
Mina armour belt
The armour belt of the “Mina” armour set features a clean, functional design with subtle decorative elements. Riveted edge flanges are a defining detail that give the belt a structured and coherent appearance and allow it to be combined easily with a wide range of other armour components. The two-piece plate belt is worn on the hips and fastened with one strap at the front and one at the back, allowing for individual size adjustment. Its slim construction and gently curved lines result in a restrained, balanced look. When worn on its own, the belt functions equally well as a practical piece of armour or as a distinctive accessory for various character concepts.Material: 1,2 mm steel Circumference: min. 85 cm, max. 98 cm Width: 17 cm Weight: app. 1250 g Colour: blank, browned
Mina bracers
With their curved cut and the simple beads, the "Mina" bracers are designed to match our "Mina" armour set. They are comfortably worn, even on shorter forearms. A generous elbow cutout ensures a lot of freedom of movement. Their long tip on the backside makes them look slim and petite without disturbing in battle. Material: Steel with 1.2 mm thickness Length: 23 cm Width at the front 8.5 cm Width at the back 15 cm
Mina chestplate
The Mina breastplate features a clear, functional design and is decorated with edge flanges and rivets. The shaped cups of the breastplate correspond approximately to size B. It is not intended to be worn directly on the body, but is designed to be worn over a gambeson or a mail shirt. The construction lightly supports the chest from below without fully enclosing it. The breastplate is of a two-piece construction and is connected to a smaller back plate by straps. This allows the size to be adjusted individually.Material: 1.2mm steelColour: blank, browned
Mina gorget
The collar of the “Mina” armour is functionally designed and defined by a clearly curved linework. Its slim construction gives it a calm, well-balanced appearance. Riveted edge flanges structure the surface and reference a classic design element of modern plate armour, allowing the collar to be easily combined with a wide range of other armour components. The collar is constructed so that it does not overlap with either the breastplate or shoulder pieces. This ensures a high degree of freedom of movement and allows for creative flexibility when combining it with additional armour elements or costume components. The collar is fastened with a cartridge-belt style closure, providing a secure and stable fit.Material: 1,2 mm steelCircumference (neck): 44 cm Length: 37 cm Width: 25,5 cm Weight: app. 800 g Colour: blank, browned
Mina greaves
The greaves "Mina" are kept simple, but with their curved tip they look both slim and elegant. Matching the armor series "Mina", the bracers also have a circumferential bead. Their functional cut and their good combinability with other armour parts from our range make them interesting for a variety of costume ideas. Material: Steel with 1.2 mm thickness Length: 30 cm Width: at the top 18 cm Width: at the bottom 14 cm
Mina set
"Mina" was made as an armour for women. Naturally we had to resign from historical patterns, as equality was not that popular amongst the medieval knight. Today we are proud to announce, that there is a way to dress strong women for the battlefield - using this armour set, you will not only be good looking on the field of glory, ladies! The "Mina" armour resebles large parts of our well known "Balthasar" series. The edges with decorative rivets are a continuous detail. Both series can be combined to get a resembeling look. We offer the armour series in a set for a lowered price. The slick pattern with lots of waves and cuts, just as the high movability and comfort when wearing it combine the attractive design with functionality. This set includes: Chestplate, Gorget, Spaulders, Armour Belt Material: 1.2 mm steel Measurements of this armour set: Chest Plate: Circumference: min. 69 cm, max. 89 cm Length: 19 cm Width: 44 cm Weight: app. 1040 g Plate Gorget: Circumference (neck): 44 cm Length: 37 cm Width: 25,5 cm Weight: app. 800 g Spaulders: Length: 27 cm Width: 34 cm Weight (pair): app. 2 kg Armour Belt: Circumference: min. 85 cm, max. 98 cm Width: 18 cm Weight: app. 1250 g
Mina spaulders
The Mina plate shoulders are defined by curved lines and decorative rivets. Two articulated lames are flexibly connected to the shoulder plate by leather straps, allowing freedom of movement in the shoulder area. The shoulders do not overlap with the breastplate and are fastened to the plate collar as well as to the upper arms. The construction allows for combination with a variety of different armour components. The shoulders are compatible with all collars from our range. Material: 1,2 mm steel Length: 27 cm Width: 34 cm Weight (pair): app. 2 kg Colour: blank, browned
Nova bracers
The bracers of the "Nova" armor provide reliable protection for the forearm. Their ergonomic shape ensures a comfortable fit, while the sturdy leather straps with buckles allow for a secure fixture and adjustable size. The asymmetrical design, with an extended outer side, offers additional protection for particularly exposed areas of the arm. The "Nova" was designed with great attention to detail in terms of shape and proportions. The result is a versatile piece of armor that impresses with its flowing lines and aesthetic elegance, providing you with maximum comfort and mobility.Material: Steel, LeatherLength: 24 cmWidth (top): 16.5 cmWidth (bottom): 12.5 cmOur products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not represent colours accurately.
Nova elbow
Like all parts of the “Nova” armour, the elbow guard stands out with its elegant and well-shaped design, suitable for both intense combat and more refined adventure concepts. The “Nova” was developed with great attention to detail regarding form and proportions. The result is a versatile piece of armour whose curved lines and aesthetic appearance offer a high level of comfort and mobility. The Nova elbow guard can be attached to the Nova upper arm guard using its suspension loop, for example with a leather cord. Of course, you can also mount it on a gambeson or a piece of chainmail. The additional strap secures the elbow in the crook of the arm. This provides a practical extension to the Nova armour while allowing you to combine the elbow guard with many existing armour parts and garments.Material: SteelNote: A leather strap is not included, but can be added easily via our convenient bundle function.
Nova greaves
The greaves of the "Nova" armour provide reliable protection for the shin and lower leg—whether in battle or against rocks and undergrowth. Their curved shape creates a harmonious look, while the side straps with sturdy buckles ensure a secure and adjustable fit. The asymmetrical design, featuring a longer outer side, offers additional protection in the most exposed areas. The "Nova" has been designed with great attention to detail in terms of shape and proportions. The result is a highly versatile piece of armour that impresses with its flowing lines and aesthetic elegance, offering you maximum comfort and freedom of movement. Material: Steel, leatherLength: 32 cmWidth (top): 23.5 cmWidth (bottom): 13.5 cmOur products are handcrafted, so dimensions and colours may vary slightly. Photographic representations and screen settings may not display colours accurately.
Nova spaulders
The spaulders of the „Nova“ armour are extremely mobile and consist of three flexible segments that adapt perfectly to the wearer’s movements. Like the rest of the armour, the spaulders also impress with their elegant and aesthetic design. The flowing lines and versatile combinability make the „Nova“ a suit of armour that proves itself in any situation and offers excellent freedom of movement. The „Nova“ was developed with great attention to detail in terms of shaping and proportions. The result is a highly versatile armour that captivates with its flowing lines and aesthetic elegance, offering you the highest level of comfort and mobility.Material: Steel, leatherLength (measured centrally across all segments): 30 cmWidth (of the top segment): 31 cmOur products are handmade, so dimensions and colours may vary slightly. Photographic images and screen settings may not accurately represent the true colours.
Nova tassets
Like all components of the "Nova" armour, the tassets impress with their elegant and well-balanced design. They complement the torso armour and protect the thighs in combat. The "Nova" was developed with great attention to detail in terms of shape and proportions. The result is a versatile piece of armour that stands out with its flowing lines and aesthetic appeal, offering a high level of comfort and freedom of movement. Material: steel, leather Length: 26 cm Width: 22 cm All measurements are given in centimetres. Our products are handmade; therefore, slight variations in size and colour may occur. Colours shown in photographs or on screens may not be accurately represented.
Nova torso armour
The „Nova“ torso armour for female warriors combines functional flexibility with elegant design. It consists of a front and back piece that can be individually adjusted to the body size and shape using side buckles. The shoulder straps allow for precise height adjustment of the chest, ensuring the armour always fits comfortably. Particularly noteworthy are the flexible sides, which adapt perfectly to the wearer’s body contours, providing an excellent fit. Additionally, the armour features three movable segments in the lower body area, offering even more freedom of movement and comfort. The „Nova“ was developed with great attention to detail in terms of shape and proportions. The result is a versatile armour that impresses with its curved lines and aesthetic elegance, offering maximum comfort and mobility. You can expand the armour with additional „Nova“ pieces or combine it with other Mytholon armour parts.Torso plate dimensions: Width at Breast Height56.75Length from Shoulder to Underbreast29Width Under the Breast55Width of Neckline17Width of Shoulders29Length of Torso Side20.5Length of Torso Side with Belt24.5 Back plate dimensions: Length of Outer Sides20.5Length of Centre Back23.5Length of Inner Sides21.5Total Width at Bottom Edge48Total Width at Top Edge46 All measurements are in cm. Our products are handmade, so measurements and colour tones may vary slightly. Photographic images and screen settings may not accurately represent the colours.
Nova upper arm with strap
Like all parts of the “Nova” armour, the upper arm guard impresses with its elegant, well-shaped design, suitable for both intense combat and more stylish adventure concepts. The “Nova” has been developed with great attention to detail regarding form and proportions. The result is a versatile piece of armour whose curved lines and aesthetic appearance offer a high level of comfort and mobility. The upper arm guard can be attached to the Nova shoulder and to any other Mytholon shoulder suspension using the included strap. To do this, pull the strap’s loop over the fastening buckle of the shoulder piece and then attach the shoulder as usual. The height of the upper arm can be adjusted individually. The Nova upper arm guard also features an attachment point for the Nova elbow guard.Tip: The strap is long enough to add additional armour parts, such as a full arm harness. If you do not need this, you can shorten the strap as required. Material: Steel, leather