Adam belt shield
Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Adam" series, this shield is decorated with the series' typical ridge along the edge. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g
Balthasar belt shield
Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Balthasar" series, this shield is decorated with rivets and a beading along the edge. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to üainting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1.2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colours: blank, browned
Galahad belt shield
This small belt shield completes the "Galahad" torso armour.Use the two buckles to strap it to the centre part of the chest plate and to cover up the unprotected parts in your crotch.It may be a small armour piece, but it brings a huge effect to any armour, as it can be used to paint heraldic colours on it. This shield can also be added to any exsisting armour, but may need some handiwork to get it attached.Material: 1,2mm steelColour: blankSize: onesize Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.
Galahad tassets
The matching tassets for the "Galahad" torso armour.Equipped with two buckles on the top, these tassets can be strapped to the front plate of the "Galahad" chestplate and cover the thighs. Alternatively you may add them to any exsisting armour (which requires some handicraft works).The plate pieces are made asymetrically, so each tassets has its place (left/right) to not interfere with the wearers movement.Also you may paint your own heraldic colours on the tassets to show your side on the battlefield.Material: 1,2mm steelColour: blankSize: onesize
Georg tassets
The tassets "Georg " are elegantly curved and convex shaped. Beadings and rivetings decorate this supplement for the "Georg " Armour. They are hooked into the Cuirass belts with sturdy buckles. The armour parts of the ' Georg ' series are characterized by high mobility and efficient protection. Material: 1.2 mm steel Length 25 cm Width 26 cm Weight 1.2 kg
Gustav belt shield
Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Gustav" series, this shield is not decorated, but meets the series' style with plain and undecorated beauty. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1.2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colour: blank, browned
Kaspar tassets
The "Kaspar" tassets are made from 7 flexible connected lamellae and fit to the "Kaspar" Torso armour, but can be worn on others too, the given rims assumed. The browned areas, in combination with the blank bordering, up grade the browned variant. Being made along patterns from the mid 16th to mid 17th century, the german horse riders armour can be used for a wide range of various characters and costumes. Material: 1,2mm steelColours: blank, browned with blank bordering Width25Length34 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.
Katharina Tassets
The tassets of the Katharina armour are fastened to the straps of the armour belt with buckles. Their height and angle can thus be optimally adjusted. They continue the curved design typical of this armour and visually round off this set. The tassets can also be combined with other armour belts and torsos from our range, such as Lambert, Galahad, Edward and Georg. Material: SteelLength: 29 cm Width Top: 18 cm
Lambert armour belt
The armour belt of our “Lambert” series features a broad leather lamella that closes the gap between torso armour and armour belt. The fittings for tassets can be used to attach “Lambert” tassets as well as tassets from other armour series, such as “Galahad”. The armour belt may be closed by means of a strap at the back. Material: steel, leather Middle Height Leather10Middle Height Metal7,5 Metal Height to Front Corner14,5 Total Width Front24,5 Total Width Back9,5 Circumference at Tightest Hole85,5 Circumference at Widest Hole114,5 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones. Weight: approx. 1.2kg
lambert belt shield
The belt shield of our “Lambert” series is an accessory you don’t necessarily need to wear in combination with a suit of armour. It is ideally suited for being used to display your coat of arms or group affiliation. Its broad loops allow you to comfortably attach it to your belt. The loops can be rotated to change their position, allowing you to attach the shield to a chainmail shirt or in a similar position. Material: steel, leather Width: 17.5cm Length: 24cm Weight: approx. 350g
Lambert tassets
The tassets of our “Lambert” armour series consist of four curved segments and offer great mobility. They may also be attached to torso armour parts and armour belts from other armour series, such as “Galahad” or “Edward”. We recommend wearing a long gambeson jacked or thigh paddings to avoid bruises and abrasions. Material: steel, leather Width: 26cm Length: 28cm Weight (pair): approx. 2.1kg
Lena armour belt
Our "Lena" armour series was especially designed for warrior princesses and shield maidens alike. We distanced from historical patterns and steped closer to a rather fantastic shape. The outcome was a not only a long awaited womens armour, but also a costume set of in the form of a worthy armour set. Be it an Amazone, a warrior princess or an exalted priestess - all of them are possible by combining the armour with the right clothing pieces...Only your imagination limits the possibilities. For all you ladies out there: this is the right armour, not only on LARP events.The "Lena" series belt is elaboratly made: it is worn on the hip and is closed with a single buckle in the back. Two segments make up this belt basically, which is fitting by its swung lines. The attached tassets are made from two pieces each and riveted to a leather strap, which is attached to the belt with rivets as well. All rivets are made from brass and complement the silvery shine of the blank armour additionally. The central shield is movable, holding the side parts of the belt, and covers the lower abdomen.All points are beaded to avoid injuries when wearing it.Material: 1.2mm steelCircumference: from 70cm to 90cmAnnotation: By enlongening the belt strap you can enlarge not only the length alone: bent the metal parts slowly and carefully to achieve a bigger circumference.Length of the tassets: app. 25cmWeight: 1.7kgColour: blank
Lena choker
Our "Lena" armour series was especially designed for warrior princesses and shield maidens alike. We distanced from historical patterns and steped closer to a rather fantastic shape. The outcome was a not only a long awaited womens armour, but also a costume set of in the form of a worthy armour set. Be it an Amazone, a warrior princess or an exalted priestess - all of them are possible by combining the armour with the right clothing pieces...Only your imagination limits the possibilities. For all you ladies out there: this is the right armour, not only on LARP events.The "Lena" neck choker is armour and accessory at the same time. It finishes off the "Lena" armour to the top and enlongens the wearers neck. This way the female warrior appears longer and the elfen princess even more raised. The buckle on the backside and a slight, carefull bending allow the chocker to be adjusted even to larger necks by the wearer individually. The chocker is being worn on top of the gorget and does not need any additional attachment. The choker can be worn without any armour as a piece of jewllery; this makes this plate armour piece something special for the women.As always: all edges and points are beaded for additional protection.Material: 1.2mm steelNecks circumference: app. 30cm (+ leather strap)Length: 11cmWeight: app. 200gr
Lucas belt shield
Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. This belt shield was, just like the entire "Lucas" series, built with a corrugation along the edge. It is worn on the belt, which is pulled through the two leather belt loops on the top. Naturally it can be worn as a small tasset on the thigh. The belt shields are, just like our arm shields, ideal to be painted, modded and combined with existing costume parts. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to üainting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.
Markward belt shield
Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Markward" series, this shield is decorated with the typical cut edges on the top. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper of 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals or writings with weatherproof acrylic paint. Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colour: blank, browned
Markward tassets
The tassets "Marward" are made of two segments, which are attached to a wide armour belt. Together they result in a movable and very effective abdomen protection. A wide leather lip forms the conclusion to the upper body and closes the gap between the tassets and a breast plate. Like all armour parts of the "Markwart" series, the tassets are simple and very functional. This armour system made of tassets and belt can be worn without aTorsoarmour and is closed with one strap on the back. It can be combined with all imaginable armour from our assortment and is suitable for many different armament concepts. Material: 1, 2mm steel Length: 55 cm Weight: 2.4 kg Colour: blank, browned
Mina armour belt
The armour belt of the “Mina” armour set features a clean, functional design with subtle decorative elements. Riveted edge flanges are a defining detail that give the belt a structured and coherent appearance and allow it to be combined easily with a wide range of other armour components. The two-piece plate belt is worn on the hips and fastened with one strap at the front and one at the back, allowing for individual size adjustment. Its slim construction and gently curved lines result in a restrained, balanced look. When worn on its own, the belt functions equally well as a practical piece of armour or as a distinctive accessory for various character concepts.Material: 1,2 mm steel Circumference: min. 85 cm, max. 98 cm Width: 17 cm Weight: app. 1250 g Colour: blank, browned
Nova elbow
Like all parts of the “Nova” armour, the elbow guard stands out with its elegant and well-shaped design, suitable for both intense combat and more refined adventure concepts. The “Nova” was developed with great attention to detail regarding form and proportions. The result is a versatile piece of armour whose curved lines and aesthetic appearance offer a high level of comfort and mobility. The Nova elbow guard can be attached to the Nova upper arm guard using its suspension loop, for example with a leather cord. Of course, you can also mount it on a gambeson or a piece of chainmail. The additional strap secures the elbow in the crook of the arm. This provides a practical extension to the Nova armour while allowing you to combine the elbow guard with many existing armour parts and garments.Material: SteelNote: A leather strap is not included, but can be added easily via our convenient bundle function.
Nova tassets
Like all components of the "Nova" armour, the tassets impress with their elegant and well-balanced design. They complement the torso armour and protect the thighs in combat. The "Nova" was developed with great attention to detail in terms of shape and proportions. The result is a versatile piece of armour that stands out with its flowing lines and aesthetic appeal, offering a high level of comfort and freedom of movement. Material: steel, leather Length: 26 cm Width: 22 cm All measurements are given in centimetres. Our products are handmade; therefore, slight variations in size and colour may occur. Colours shown in photographs or on screens may not be accurately represented.
Nova upper arm with strap
Like all parts of the “Nova” armour, the upper arm guard impresses with its elegant, well-shaped design, suitable for both intense combat and more stylish adventure concepts. The “Nova” has been developed with great attention to detail regarding form and proportions. The result is a versatile piece of armour whose curved lines and aesthetic appearance offer a high level of comfort and mobility. The upper arm guard can be attached to the Nova shoulder and to any other Mytholon shoulder suspension using the included strap. To do this, pull the strap’s loop over the fastening buckle of the shoulder piece and then attach the shoulder as usual. The height of the upper arm can be adjusted individually. The Nova upper arm guard also features an attachment point for the Nova elbow guard.Tip: The strap is long enough to add additional armour parts, such as a full arm harness. If you do not need this, you can shorten the strap as required. Material: Steel, leather
Ortwin tassets antique finish
The rivets emphasise the armour's shape and are a nice detail. The stomach ring features two straps for attaching the matching tassets. We recommend wearing a padded vest/gambeson underneath the armour to increase wearing comfort and to better protect yourself against injuries or chafing. Material: steel, leather Tassets:Length: 28cmWidth: 27cm
Rikomer armour belt
The "Rikomer" plate armor is the brother of our "Dragomir" armor. Elaborately manufactured, it consists of a large number of lames and elements that, when combined, result in an extraordinary armor that can hardly be more agile. Every part from "Rikomer" is carefully flanged and coordinated with one another. Unlike "Dragomir", this armor is not decorated with beads and thus has an uncompromising, brutal look that contrasts with the finely shaped parts. "Rikomer" impresses with its design and the masterful execution that makes this armor so unique. It is also a more affordable than its brother "Dragomir". Armor like this is usually only available as a custom-made product and we had to fiddle a long time before we could get it ready for series production. Of course, the fit must and can be optimized here and there by careful bending, but we have designed the armor in such a way that it can be carried into the field with maximum comfort. The individual parts are kept bright, making Rikomer particularly suitable for noble knights and fighters of light. We generally recommend wearing a gambeson and arm and leg paddings under plate armor; This significantly improves wearing comfort and protection. Material: steel, leather Belt length M: 135 cm Belt length L-XL: 150 cm
Vigor tassets with belt
Our "Vigor" armour was designed for the more imposing characters on the battlefield – referring not only to their formidable fighting style. This armour set’s generous dimensions make it comfortable for longer periods of time even for powerfully built warriors of both genders. However, a small tweak in design also allows adjusting "Vigor" to slender people. To do so, you simply have to remove the central tasset from the armour belt and, if necessary, shorten the belt. In so doing, you can improve the fit for wearers with slimmer hips. The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of tabletop miniatures. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn, but well-cared-for character. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand, it is unique for every single armour. However, if you’d prefer your armour unburnished, you can also easily remove the burnishing layer using a soft abrasive fabric.The armour belt is long enough even for broader hips and features three tassets. These are suspended from the belt from loops so that their position can be adjusted individually. In order to reduce the armour belt’s size, you can remove the central tasset and thus shorten the belt’s circumference.It goes without saying that all edges of these armour pieces are beaded. Material: steel, leatherArmour belt: Length: approx. 160cm Width approx. 2.8cm Side tassets: Width (top): 47cm Width (bottom): 24cm Length: 36cm Weight (each): approx. 1.8kg Central tasset: Width (top): 36cm Width (bottom): 13cm Length: 34.5cm Weight: approx. 1.3kgThe parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight. Adjustments to several of the measurements are possible by carefully bending the respective armour parts.
Vladimir armour belt
The "Vladimir" armor belt is the appropriate thigh protection to the "Vladimir" Torso armour. It consists of segmented tassets which are attached to a sturdy belt of split leather by means of enclosed leather straps. With additional eyelets, the tassets can be placed in different places of the belt and are therefore optimally adjustable for individual size and body shape. This armor is self-sustaining and can be worn without a torso armour. It can also be combined with chain mails or leather armour. Material: 1.2 mm steel, split leatherLength: 33 cmWidth of tassets: 37 cmCircumference: approx. 134 cmWeight: 2.8 kgColour: blank, browned Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.
Wilhelm armshield large
The large "Wilhelm" arm shield is thought to be and upgrade to our chainmail shirts. Similar to a belt shield, those add ons can show the groups colours, insignia or heraldry. It is being fixed to the wearers upper arm with a belt and can be fastened to the mails rings by using a leather string. Made from armour steel, it is not only an additional armour plate, but also another nice detail on any existing costume. The shield can also be fastened to any other existing armour and clothing - there is no definite need for a chainmail. A gambeson can also be a good foundation: just sew a leather string to the sleeve and attach the shield there! You will only need some creativity and a little handywork. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. We suggest to order a leather string from our stock: this way you have everything at hand, when starting to built your new upgrade. Material: 1,2 mm steel Length: 27 cm Width: 23 cm Weight: app. 0,5 kg Colours: blank, browned
Wilhelm armshield small
The small "Wilhelm" arm shield is thought to be and upgrade to our chainmail shirts. Similar to a belt shield, those add ons can show the groups colours, insignia or heraldry. It is being fixed to the wearers upper arm with a belt and can be fastened to the mails rings by using a leather string. Made from armour steel, it is not only an additional armour plate, but also another nice detail on any existing costume. The shield can also be fastened to any other existing armour and clothing - there is no definite need for a chainmail. A gambeson can also be a good foundation: just sew a leather string to the sleeve and attach the shield there! You will only need some creativity and a little handywork. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. We suggest to order a leather string from our stock: this way you have everything at hand, when starting to built your new upgrade. Material: 1,2 mm steel Length: 23 cm Width: 17 cm Weight: app. 0,5 kg Colours: blank, browned