Adam spaulders large
The big shoulders of the "Adam" series have a three-segment lamellar. It is attached to a generous, two-part shoulder segment and gives the wearer a lot of mobility. Like the entire "Adam" series, these large shoulderarmour has a simple elegance. The typical bead adorns the curved main segment and gives it additional stability. The large shoulders are good to complement a heavy armour and can be combined with any Mytholon plate gorget. Material: 1, 2mm steelTotal length: 30 cm Top length: 17 cm Top width (curve): 34.4 cm Bottom width: 21 cmWeight: 2.3 kg
Adam spaulders small
Our small "Adam" spaulders are perfectly suited to be worn as additional armour over chainmail or leather armour. Due to their size and the flexible lamellae covering the upper arms, these pieces will not encumber you in any way.Material: 1.2mm steelWidest arm circumference: 56 cmTightest arm circumference: 34,5 cmColour: blank, browned
Balthasar spaulders large
These are our big "Balthasar" spaulders. Just the right thing for knights and other nobles. Although they are rather big and decorated, these spaulders are "ready for the field".The spaulders are composed from seven parts and therefore very flexible in movement.Material: 1.2mm steelColours: blank, browned
Balthasar spaulders small
The small shoulders "Balthasar " provide high stability with maximum mobility. Each of the four flexibly connected segments was fitted with a bead and the typical Balthasar riveting strip. This does not only look very noble, it also significantly increases the stability of the segments. Together with sturdy rivets made of solid steel, these shoulders hold many battles without deforming. They are well suited to complement a ' noble ' armor and for all armor carriers that want to show some prosperity. Like all Mytholon plate shoulders, this one is of course compatible with all our plates gorgets. Material: SteelLength: 31 cmWeight: 1.5 kgsColours: blank, burnished
Elias spaulders large
The large, segmented spaulders from our "Elias" series.The original, "typical" spaulder has a segment added to it and therefore looks even more impressing. The spaulders are being fixed by a buckle-strap on the gorget, and a single strap under your upper arm. The gorget is not included.Material: 1.2mm steelColour: blank, brownedSold in pairs.
Elias spaulders small Discontinued
One of our "Elias" series' spaulders. They are being fixed to the wearers' gorget, by using the belt-buckle. Use the single stap under your upper arm. The gorget is not included in this offer.Length: 22 cmWidth over curvature: 37.5 cmColour: blankSold in pairs.
Falerio shoulder armour
The Falerio shoulder is part of our Beasthunter series and was developed for fighters who want to combine mobility with reliable protection. It is worn on one shoulder and combines a multi-part plate shoulder with a small breastplate, which is securely fixed to the body with an adjustable leather strap.The articulated shoulder lames offer a high degree of freedom of movement and follow the natural movements of the arm. Thanks to its asymmetrical design, the Falerio shoulder is especially suitable for hunters, mercenaries, rangers or monster hunters and gives every outfit a distinctive, functional character. Made from robust steel and fitted with high-quality leather straps, the shoulder can be combined with other armour pieces from the Beasthunter series as well as with many other plate or leather costumes.Material: steel, leatherChest circumference approx. 58 cm to 68 cm
Galahad spaulders
A pair of huge spaulders, equippe with sword breakers and besagew on each side.The spaulders are made from multiple parts that are riveted together. This way the wearer will still be able to move his arms freely and is not limited in movement.The sword breakers on the inside enlarge the entire spaulder from the side view. Use the inner buckle to strap the spaulders to the \\"Galahad\\" torso armour; additionally there is a buckle-strap for the upper arm. The besagew cover the armpit, the place with auxilliary arteries - vital parts, so to say. This is the armour part, where you have the possibility to paint your own heraldic colours onto. A small colourful armour piece will loose up the complete blank look of the armour.Material: 1,2 mm steelLength: 44 cmWidth: 44 cmCircumference: approx. 60 cmWeight: 5.9 kg
Georg spaulders
The "Georg " spaulders consist of three segments. They are generously made and reach wide on the chest and back. The upper arm segment is flexible. Together with the "Georg " gorget, which with its long chest part, closing the gap between the shoulders, these spaulders result in an almost closed and very agile chest armour. This not only makes the shoulders "Georg " special, but the entire armament concept. Ornamental beading and riveting can be found on all parts of the "Georg " series, so of course also on the spaulders. For all heavy armour concepts, these spaulders are an excellent and exceptional addition. Together with the other armour parts of the "Georg" series they form a heavy but agile armor. Material: 1.2 mm steel Length: 30 cm Width: 54 cm Weight (single): 1.9 kg Offered here is a pair of shoulders.
Gustav spaulders
All our products from the "Gustav" series combine simple design and functionality at a great price performance ratio. This series of low cost plate armour gives you the opportunity to arm yourself without spending lots of money. Its design suits many different character concepts and therefore you will be able to use it over and over again for many years. It is also great for medieval fairs and historic events.The spaulders are assembled of 5 interlocking components and leave a lot of freedom of movement to the wearer. They are attached to the collar with a leather strap. Due to their plain design they can be combined with various types of leather armour.Material: Steel 1.2 mmColour: blank, browned
Kaspar spaulders
The "Kaspar" spaulders are designed to fit the rest of the series and are made from 4 flexible connected plates based on the historical style.The dark black burnished areas, in combination with the blank bordering of the burnished variant, upgrade the visual appearance of the "Kaspar" series. Based on the style of German riders' armours from the mid 16th to mid 17th century, the burnished surface is interspersed with blank portions. This makes the armour appear even more massive. Material: 1,2mm steelColours: blank, burnished with blank bordering Length34.5Width top35Width bottom17.5Circumference at widest hole46Circumference at narrowest hole28 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.
Katharina arm guard with spaulders
The arm guard of the Katharina armour is a modular set and already includes the spaulders. You can decide whether you want to wear only the spaulders, the spaulders with an additional upper arm segment or as a complete arm guard together with the shaped elbow tile. All segments are connected with straps and buckles, so you can adjust the arm guard optimally to your arms. Of course, all parts of the armament are flanged to ensure the safety of you and your fellow players. On the inside, the parts have been painted to protect against rust. This varnish can peel off over time. We recommend regular care with oil, e.g. with Ballistol, which is available from us. Material: Steel, LeatherLength top shoulder plate: 19cmWidth top shoulder plate: 31 cmLength entire spaulder: 40 cm to 26 cm (adjustable)
Lambert spaulders
The spaulders of our “Lambert” series consist of six movable segments. Due to their exceptional length, they also protect the upper arm without hindering the wearer’s movements in combat. Like the entire “Lambert” armour series, the spaulders have a curved design and stand out through both their functionality as well as their elegant shape. Straps on the inside may be used to attach additional arm protection. Material: steel, leather Width: 16.5cm Length: 35cm Weight: approx. 1.3kg
Lena spaulders
Our "Lena" armour series was especially designed for warrior princesses and shield maidens alike. We distanced from historical patterns and steped closer to a rather fantastic shape. The outcome was a not only a long awaited womens armour, but also a costume set of in the form of a worthy armour set. Be it an Amazone, a warrior princess or an exalted priestess - all of them are possible by combining the armour with the right clothing pieces...Only your imagination limits the possibilities. For all you ladies out there: this is the right armour, not only on LARP events.The "Lena" series spaulders have an elegant curved upper arm part and a great cut on the shoulder piece by having the blade breakers added on top of them. This stable riveted blade breaker does not only add a martial look to the wearer, but makes the wearer a little wider. A well-fortified look is added to the wearer. All edges and points are beaded for extra protection and comfort for the wearer.Material: 1.2mm steelWidth: 35cmLength: 32cmWeight: app. 2.5kg
Markward spaulders large
The large spaulders of the "Markward" series have a long upper arm segment, which is attached to the generously designed shouldersegmenet. The deceived drawers not only serve the ornament, it also gives additional stability. The excellent price make the big shoulders "Markward" special. Their imposing, carefully shaped shoulder segments are ideal for the addition of heavy armor. Of course, these shoulders are compatible with all Mytholon gorgets. Material: 1, 2mm steelLength: 30 cmWeight: 2 kgColour: blank, browned
Markward spaulders small
The small pauldrons of the “Markward” series feature a long upper arm segment that is flexibly connected to the two-part shoulder segment. The articulated design is not merely a visual detail but also adds additional stability to the construction. In addition to their excellent price-performance ratio, the small “Markward” pauldrons stand out for their slim cut and compact build. This makes them equally suitable for complementing both light and heavy armour. Naturally, these pauldrons are compatible with all Mytholon gorgets. Material: 1.2 mm steelLength: 32 cmWidest arm circumference: 56 cmTightest arm circumference: 34,5 cmWeight 1.65 kgColour: blank, browned
Mina spaulders
The Mina plate shoulders are defined by curved lines and decorative rivets. Two articulated lames are flexibly connected to the shoulder plate by leather straps, allowing freedom of movement in the shoulder area. The shoulders do not overlap with the breastplate and are fastened to the plate collar as well as to the upper arms. The construction allows for combination with a variety of different armour components. The shoulders are compatible with all collars from our range. Material: 1,2 mm steel Length: 27 cm Width: 34 cm Weight (pair): app. 2 kg Colour: blank, browned
Nova spaulders
The spaulders of the „Nova“ armour are extremely mobile and consist of three flexible segments that adapt perfectly to the wearer’s movements. Like the rest of the armour, the spaulders also impress with their elegant and aesthetic design. The flowing lines and versatile combinability make the „Nova“ a suit of armour that proves itself in any situation and offers excellent freedom of movement. The „Nova“ was developed with great attention to detail in terms of shaping and proportions. The result is a highly versatile armour that captivates with its flowing lines and aesthetic elegance, offering you the highest level of comfort and mobility.Material: Steel, leatherLength (measured centrally across all segments): 30 cmWidth (of the top segment): 31 cmOur products are handmade, so dimensions and colours may vary slightly. Photographic images and screen settings may not accurately represent the true colours.
Ortwin spaulders antique finish
The rivets emphasise the armour's shape and are a nice detail. The "Ortwin" spaulders can be attached to the torso armour using straps. We recommend wearing a padded vest/gambeson underneath the armour to increase wearing comfort and to better protect yourself against injuries or chafing. Material: steel, leatherSpaulders:Length: 34cmShoulder circumference: 44cm
Seraphim spaulders
Our "Seraphim" spaulders are a special piece for themselves: the design is knowingly not historical, but fantastic. They are made very opulent and underline the aspect of "showing-off" and being impressive.The segment of the upper arm, holding one of the three blade-breakers, is attached to the wearers body with a single wide leather strap. The two upper blade-breakers are mounted to another moveable part and provide a certain movability despite the size of the spaulders.The buckle on the top of the spaulders is used to attach them to all of our gorgets and chest plates. These spaulders size is impressive, without loosing it being oversized.Material: 1,2mm steelLength: 42cmWidth: 31cmWeight: app. 4kgColour: blank, browned
Vigor spaulders
Our "Vigor" armour was designed for the more imposing characters on the battlefield – referring not only to their formidable fighting style. This armour set’s generous dimensions make it comfortable for longer periods of time even for powerfully built warriors of both genders. However, a small tweak in design also allows adjusting "Vigor" to slender people. To do so, you simply have to remove the central tasset from the armour belt and, if necessary, shorten the belt. In so doing, you can improve the fit for wearers with slimmer hips. The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of tabletop miniatures. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn, but well-cared-for character. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand, it is unique for every single armour. However, if you’d prefer your armour unburnished, you can also easily remove the burnishing layer using a soft abrasive fabric.The mighty spaulders consist of seven segments and also feature segmented upper arm protection. All the parts are connected flexibly and allow a maximum in freedom of movement.It goes without saying that all edges of these armour pieces are beaded. Material: steel, leather The parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight. Adjustments to several of the measurements are possible by carefully bending the respective armour parts.
Vladimir spaulders
Same as the "Vladimir" torso armour the spaulders are made out of several flexible segments. This allows the wearer to lift and turn his arms to the greatest possible extent.Their broad shape accentuates the impressive appearance of the whole suit of armour.Top edge width: 40 cm Bottom edge width: 57 cm Top segment height: 17.5 cm Lateral height without blade breaker: 15.5 cm Frontal height without blade breaker: 37.5 cm Blade breaker height: 5 cm Arm strap circumference: 53 - 61 cm Material: 1,2mm steelColour: blank, browned