Edward full arm guard Discontinued

€64.95*

% €129.90* (50% saved) previously €84.43*

Prices incl. VAT plus shipping costs

Delivery time 2-5 days

Colour

Product group

plate armor

Product number: 970091

Our benefits

Free shipping from 50€ (DE) / 150€ (NL,BE,PL+)
Great Quality for low prices
Choose from 5.000+ items

Product information "Edward full arm guard Discontinued"

Discontinued, only while stocks last

The full armguard from the "Edward" series is big enough to be worn on top of a gambeson and even the padded jacket with an additional chain mail.
The upper part is being fixed to the spaulders on the inner side. The arm guard itself is then fitted to the wearers arm by the straps and buckles on upper arm, elbow and forearm.
The inner elbow is being protected by the "shell", as the plate piece on the outside of the guard is called. The forearm is closed inside a two-piece pipe - you will not need any bracers in addition to this piece here.
Material: 1.2mm steel
Colours: blank, browned with blank edges

lenght	54
upper width	48
lower width	33

All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

Accessory Items

Ballistol spray

THE universal spray made by the Ballistol company. Can be used for metal, just as well as leather and various other materials. A well known care product for animals paws and fur; a true allrounder, completly untoxic. We advise it for metal armour care and protection of leather armours.The practical 50ml spray can for your journeys, or the large 200ml spray can for your home.Please read the containers warnings section.Can not be exported outside the EU due to EU-law.

€3.90*

Details

Customers also viewed

Lucas gorget

This small gorget was designed for young heroes and ladies - bigger necks will have difficulties fitting in there.The gorget is being closed with a buckle on the right shoulder and opened on the left one. It is made with a short "turtle neck", having a completly different appearance as any other gorget on the market. There are no fixpoints for spaulders attached on this gorget. Attention: The bump on the lower backside is for ergonomic fitting and NOT a damage. Material: 1.2mm steelColour: blank

€49.90*

Berthold sallet

This helmet shows a high, pointed scull piece with an enlongened neck protection. The part on the forehead is riveted to the helmet and provides an additional protection to the wearer. The scull part is made with a spine.The visor can be moved upwards to allow a better breathing for the wearer in between battle moments.The helmet is made with an inner inlay of foam (covered in cotton) and has a chin strap attached.The sallet is a very common helmet type for the late medieval period and was often worn in combination with gotic armourment. It was used later as well, especially by bandits and sellswords, who scavaged them off the battlefield.Material: 1,2mm steelSize: up to 62cm circumferenceColour: blankWe recommend to wear a padded coif underneath to avoid scratches and bruises. This will maximize your comfort.

€119.90*

Edward greaves Discontinued

Discontinued, only while stocks last These greaves were built with a bigger inner diameter to be worn by bigger heroes and on top of padded leg protection. They have a beading surrounding the edge, just as well as rivets for decoaration. The foot part is cut out lower, so they can rest comfortably on the foot and protect the ankles. The swung shape of the greaves makes them look even more exclusive. They are being closed with two buckle-straps. Material: 1,2mm steel Colour: blank, browned with blank edges length34,5 upper width27lower width24 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

€34.95* €69.90* (50% saved)
previously €45.43*

Lena chest plate

The chest plate from our "Lena" series was built for a cup size of "B" to "D". It consists of three pieces: the two cups for the front and the back plate.The two cups are held together by a leather strip and are attached to the back plate with four buckles. This way it can be adjusted to the wearers body individually.Being worn directly on the top layer of clothing it can improve many differernt costumes and character ideas.Material: 1.2mm steelColour: blankSize:S-M: up to B cup, breast circ. 85-107 cmL-XL: up to D cup, breast circ. 110-126 cm

€89.90*

Sigismund burgonet

This helmet is built along the historical bouronet from the early 16th century. The head is well protected inside a round scull cap with a high riser in the centre of the spine. The face is covered by the small brim in the front and the two cheek flaps on the sides. Both flaps are punched with a floral pattern aside the ears to allow a better hearing.The helmet has an enlongened neckpiece, so that the part between cuirass and helmet is closed as well.The burgonet developed from the sallet in the 16th century and was, just behind the Morion, the most worn helmet in the 16th and 17th century.Material: 1,2mm steelSize: up to 62cm circumferenceColour: blankWe recommend to wear a padded coif underneath to avoid scratches and bruises. This will maximize your comfort.

€119.90*

Customers also bought

Only 3 available

Edward spaulders Discontinued

Discontinued, only while stocks last This pair of massive spaulders is built with additional blade turners attached on top of the shoulder parts. This makes every wearer appear even bigger. The spaulders are built from two parts (shoulder and upper arm) and are being attached on the collar or torso of an exsisting armour and fixed to the wearers upper arm to hold them in place. This way they stay in place and will disturb the wearers movement only a little. The spaulders are made in the style of the "Edward" armour: a ridge along the edge and many decorative rivets surrounding it. The pieces for the upper arm are something very special: they are built anatomically, so that they rest on the upper arm very tight and comfortably. Material: 1,2mm steel Colour: blank, browned with blank edges length35width52 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

€79.96* €159.90* (49.99% saved)
previously €103.93*

Only 2 available

Edward full legguard browned with blank edges Discontinued

Discontinued, only while stocks last The "Edward" series full leg guards was built large enough even for bigger heroes. This way it can be worn even on top of padded thigh guards and completes many full plate armours. It is being tied to the wearer by using a belt for the two laces and attached to the leg and knee with buckle-straps. The knees outer side is closed by a shell (knee-plate), so that blows and strikes can not cut the important parts. The leg guards ends just below the knee and can therefore be worn with greaves or seperatly: both ways are possible and depend on the wearers' decision. Material: 1.2mm steel Middle of knee to outer edge of thigh52.5Middle of knee to inner edge of thigh34Metal width at thigh33Middle of knee to lower edge middle22Metal width at bottom22Total lengthca. 73 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

€59.95* €119.90* (50% saved)
previously €77.93*

Markward tassets

The tassets "Marward" are made of two segments, which are attached to a wide armour belt. Together they result in a movable and very effective abdomen protection. A wide leather lip forms the conclusion to the upper body and closes the gap between the tassets and a breast plate. Like all armour parts of the "Markwart" series, the tassets are simple and very functional. This armour system made of tassets and belt can be worn without aTorsoarmour and is closed with one strap on the back. It can be combined with all imaginable armour from our assortment and is suitable for many different armament concepts. Material: 1, 2mm steel Length: 55 cm Weight: 2.4 kg Colour: blank, browned

€63.91* €79.90* (20.01% saved)