A delicate piece of armour for women.The straps for the shoulders and breast parts are attached to a small shield in the back. This way it fits tightly and is also adjustable in size. The cups were made in "B" size, so this armour is made for slim women only.The armour is framed by a deepening with decorative rivets.This element allows several Mytholon plate armours to match with the "Mina" series.Material: 1.2mm steelColour: blank, browned

This small gorget was designed for young heroes and ladies - bigger necks will have difficulties fitting in there.The gorget is being closed with a buckle on the right shoulder and opened on the left one. It is made with a short "turtle neck", having a completly different appearance as any other gorget on the market. There are no fixpoints for spaulders attached on this gorget. Attention: The bump on the lower backside is for ergonomic fitting and NOT a damage. Material: 1.2mm steelColour: blank

Our "Lena" armour series was especially designed for warrior princesses and shield maidens alike. We distanced from historical patterns and steped closer to a rather fantastic shape. The outcome was a not only a long awaited womens armour, but also a costume set of in the form of a worthy armour set. Be it an Amazone, a warrior princess or an exalted priestess - all of them are possible by combining the armour with the right clothing pieces...Only your imagination limits the possibilities. For all you ladies out there: this is the right armour, not only on LARP events.The "Lena" series gorget appears smaller and more delicate than most other plate metal gorgets. despite of this, it works just as good as a plate spaulder carrier with the two buckle/straps on the sides. It is being closed with a simple strap and can be closed by the wearer when fully armed.You can wear all our spaulders from all series in combination with this gorget.Younger heroes, kids and smaller persons can wear this gorget in a combination with the small spaulders from the "Adam", "Balthasar" and "Markward" series.If your costume creation allows a padded gorget - we suggest to wear padding underneath all metal armour pieces, as this prevents bruises and scratches when being armed.Material: 1,2mm steelNeck circumference: app. 44cmLength of the front segment: 10cmLength of the back segment: 10cmWidth: 27cmWeight: app. 600gr

Our "Lena" armour series was especially designed for warrior princesses and shield maidens alike. We distanced from historical patterns and steped closer to a rather fantastic shape. The outcome was a not only a long awaited womens armour, but also a costume set of in the form of a worthy armour set. Be it an Amazone, a warrior princess or an exalted priestess - all of them are possible by combining the armour with the right clothing pieces...Only your imagination limits the possibilities. For all you ladies out there: this is the right armour, not only on LARP events.The "Lena" series gorget appears smaller and more delicate than most other plate metal gorgets. despite of this, it works just as good as a plate spaulder carrier with the two buckle/straps on the sides. It is being closed with a simple strap and can be closed by the wearer when fully armed.You can wear all our spaulders from all series in combination with this gorget.Younger heroes, kids and smaller persons can wear this gorget in a combination with the small spaulders from the "Adam", "Balthasar" and "Markward" series.If your costume creation allows a padded gorget - we suggest to wear padding underneath all metal armour pieces, as this prevents bruises and scratches when being armed.Material: 1,2mm steelNeck circumference: app. 44cmLength of the front segment: 10cmLength of the back segment: 10cmWidth: 27cmWeight: app. 600gr

Our "Lena" armour series was especially designed for warrior princesses and shield maidens alike. We distanced from historical patterns and steped closer to a rather fantastic shape. The outcome was a not only a long awaited womens armour, but also a costume set of in the form of a worthy armour set. Be it an Amazone, a warrior princess or an exalted priestess - all of them are possible by combining the armour with the right clothing pieces...Only your imagination limits the possibilities. For all you ladies out there: this is the right armour, not only on LARP events.The "Lena" neck choker is armour and accessory at the same time. It finishes off the "Lena" armour to the top and enlongens the wearers neck. This way the female warrior appears longer and the elfen princess even more raised. The buckle on the backside and a slight, carefull bending allow the chocker to be adjusted even to larger necks by the wearer individually. The chocker is being worn on top of the gorget and does not need any additional attachment. The choker can be worn without any armour as a piece of jewllery; this makes this plate armour piece something special for the women.As always: all edges and points are beaded for additional protection.Material: 1.2mm steelNecks circumference: app. 30cm (+ leather strap)Length: 11cmWeight: app. 200gr

Our "Lena" armour series was especially designed for warrior princesses and shield maidens alike. We distanced from historical patterns and steped closer to a rather fantastic shape. The outcome was a not only a long awaited womens armour, but also a costume set of in the form of a worthy armour set. Be it an Amazone, a warrior princess or an exalted priestess - all of them are possible by combining the armour with the right clothing pieces...Only your imagination limits the possibilities. For all you ladies out there: this is the right armour, not only on LARP events.The "Lena" series belt is elaboratly made: it is worn on the hip and is closed with a single buckle in the back. Two segments make up this belt basically, which is fitting by its swung lines. The attached tassets are made from two pieces each and riveted to a leather strap, which is attached to the belt with rivets as well. All rivets are made from brass and complement the silvery shine of the blank armour additionally. The central shield is movable, holding the side parts of the belt, and covers the lower abdomen.All points are beaded to avoid injuries when wearing it.Material: 1.2mm steelCircumference: from 70cm to 90cmAnnotation: By enlongening the belt strap you can enlarge not only the length alone: bent the metal parts slowly and carefully to achieve a bigger circumference.Length of the tassets: app. 25cmWeight: 1.7kgColour: blank

"Mina" was made as an armour for women. Naturally we had to resign from historical patterns, as equality was not that popular amongst the medieval knight. Today we are proud to announce, that there is a way to dress strong women for the battlefield - using this armour set, you will not only be good looking on the field of glory, ladies! The spaulders are, just like the entire "Mina" series, built similary to the "Balthasar" series: decorations with rivets along the edge beading are a returning design element in both armours. Both armour series can easily be combined with each other. A slim built and swung lines provide a delicate shape to these spaulders. Two moving pieces are flexibly attached by a leather strap to the top plate. The spaulders do not overlap the chest plate and are fastened to the gorget on the top and the upper arm with the bottom strap. Naturally the spaulders can be combined with any other gorget from our offer. Material: 1,2 mm steel Length: 27 cm Width: 34 cm Weight (pair): app. 2 kg Colour: blank, browned