Sinold belt tongue with cross

€3.89*

Prices incl. VAT plus shipping costs

Delivery time 2-5 days

Product number: 960201

Our benefits

Free shipping from 100€ (DE only)
Express-Shipping within 24h (DE)
Choose from 5.000+ items

Product information "Sinold belt tongue with cross"

Based on high medieval models and cast from fine bronze, the belt tongue "Sinold" adorns straps with a width of 3cm.
Pins for riveting are not included; you can find them in our range of accessories.

Material: bronze
length: 7.7cm
width: 3cm

Customers also bought

Only 1 available

Hemma buckle

The double buckle "Hemma" is hand-cast from brass and is suitable for straps with a width up to 3.5cm. Material: brassWidth: 4.2cmWeight: 40g

€3.90*

Louis belt bag small

A pretty small belt bag with elaborate hand seams and a simple loop for closing. It is especially suitable for fans of living history. The beltloops are big enough to have a wide belt passed through. The expansion gap (made from suede leather) allows the bag to grow with its filling. The leather pieces of the Mytholon series "Louis" are especially suitable for fans of living history. They are made of robust upper leather and sewn by hand. Rivets where used in none of these articles. The variation made of untreated leather can be dyed or greased at your convenience.Material: LeatherWidth: 12cmHigth: 10cmDepth: up to 10cmBelt loop: up to 5cm

€39.90*

Tinne brass pins 8 pcs.

With "Tinne" you get 8 brass nails - 1.6 mm round head pins made of solid brass MS-64 with a share of 64% copper and 36% zinc. Pins made of this alloy are very easy to shape when riveting and are thus ideal for attaching historic and fantastic fittings in medieval reenactment and LARP. Dimensions: 1.6 mm x 13 mm. Fix fittings and decorations with brass nails, how does that work? The fitting or decoration to be fastened is placed on the belt or pocket. Mark the required 2 mm holes in the desired places and punch the leather with an eel. Of course, using a pair of punch pliers is also possible, but the hole must not be too large then, because the leather is punched out and, as with the use of eels, can not contract again around the rivet. The head of the pin should of course be on the side that is visible later, the so-called "show side". Depending on the thickness of the material, shorten the brass pin on the pointed side to 1.5 mm - 2 mm and tap it in circular strokes with the smallest possible round hammer, so that a slightly arched head is formed and the fitting is solidly connected to the backing material. For smoothing a sandpaper with 600er Körning is recommended. For a better grip, you can also use a small washer, but the riveting is then not so medieval. Have fun crafting!

€0.49*

Peary jacket wool

This jacket from our "7 Seas" series is cut short and perfectly suited for the portrayal of pirates or seamen. "Peary" is a short jacket with 7/8 sleeves and a simple, round collar. The short sleeves leave shirt sleeves or jewlery visible. Eight brass buttons give you the ability to wear this jacket opened or closed. Material: woolSize: S-XXLColours: Black & brown

€19.99* €83.90* (76.17% saved)