The small shoulders "Balthasar " provide high stability with maximum mobility. Each of the four flexibly connected segments was fitted with a bead and the typical Balthasar riveting strip. This does not only look very noble, it also significantly increases the stability of the segments. Together with sturdy rivets made of solid steel, these shoulders hold many battles without deforming. They are well suited to complement a ' noble ' armor and for all armor carriers that want to show some prosperity. Like all Mytholon plate shoulders, this one is of course compatible with all our plates gorgets. Material: SteelLength: 31 cmWeight: 1.5 kgsColours: blank, burnished

Our small "Adam" spaulders are perfectly suited to be worn as additional armour over chainmail or leather armour. Due to their size and the flexible lamellae covering the upper arms, these pieces will not encumber you in any way.Material: 1.2mm steelWidest arm circumference: 56 cmTightest arm circumference: 34,5 cmColour: blank, browned

The "Balthasar" gorget is a very stylish piece of armour. Elegant lines and decorative rivets along its edges, make it stand out of the mass.This gorget can also be combined with all other Mytholon spaulders. To make them look their best we recommend combining them with other "Balthasar" armour parts.There are two different "Balthasar" gorgets. We recommend the smaller size for the leaner necks of ladies and adolescents. We recommend the larger size for gentlemen.Small: Length front part: 23cmTotal width: 29cmLarge:Length front part: 29cmTotal width: 36cm Material: 1,2mm SteelColours: blank, brownedYou can find all our "Balthasar" series products here.Maybe take a look at our Padded Jackets to wear them underneath your Armour. This maximizes the comfort wearing it.

The "Adam" gorget captivates with simple elegance. Two embossed ornamental beads are not only jewelry, they also give the collar a lot of stability. All edges are of course, as with all Mytholon armor, crimped. Thanks to its simple shape, this gorget can be used for all imaginable armament concepts. All the spaulder from our plate armour range can be attached to this collar. Material: 1, 2mm steelShoulder blade width: 8cmTotal width: 33cmNeck length: 14cmFront length: 22cmTotal length: 46cm Weight: 1 kg Colour: blank, browned

The "Balthasar" gorget is a very stylish piece of armour. Elegant lines and decorative rivets along its edges, make it stand out of the mass.This gorget can also be combined with all other Mytholon spaulders. To make them look their best we recommend combining them with other "Balthasar" armour parts.There are two different "Balthasar" gorgets. We recommend the smaller size for the leaner necks of ladies and adolescents. We recommend the larger size for gentlemen.Small: Length front part: 23cmTotal width: 29cmLarge:Length front part: 29cmTotal width: 36cm Material: 1,2mm SteelColours: blank, brownedYou can find all our "Balthasar" series products here.Maybe take a look at our Padded Jackets to wear them underneath your Armour. This maximizes the comfort wearing it.

This fantastic helmet is made from many metal pieces, which are riveted together to shape this extravagant head protection.The visor can be lifted without any problems to allow the wearer a better breathing and visibility.The bottom part along the neck line is finished off with a wide piece for additional protection.The helmet is delivered without an inner padding and without the chin strap.Material: 1,2 mm steelInner circumference: 66 cm

The armguard from the "Balthasar" series is very elaborate and is made up of nine flexibly connected segments. This ensures maximum agility in combat. With the ornamental rivets and beading typical of the "Balthasar" series, the armguardr is well suited to complement a "noble" armor. Each Mytholon shoulder armour has a belt on its underside in which this armguard can be mounted. In this way, various combinations and armament concepts are possible. Material: SteelColours: blank, brownedLength: 46 cmWeight: 3,8 kg

As with all other products from the "Balthasar" line, these greaves have a rim decorated with rivets. The combination of a rounded outline and decorative elements make them look both noble and warlike. Material: 1,2mm Steel

The "Hilde" brooch is made of bronze and features a simple, functional design. It is ideal for fastening arm and leg wraps or closing lighter fabrics. Thanks to its understated shape, "Hilde" can be used both as a practical accessory and a decorative element—suitable for a wide range of garments. Material: Bronze Width: approx. 3.2 cm Height: approx. 2.8 cm Pin length: approx. 4 cm All measurements are in centimetres. As our products are handmade, slight variations in size and colour may occur. Colours shown in photographs or on screens may not be accurately represented.