Sylvana fibula

The eating awl is the ancestor of the fork and can very well be used on a medieval banquet table. It may as well be used as a tool for leather crafting.The stabile awl from the "Veit" series can be used to poke through thick leather to make way for the sewing awl. Other, than with a hole puncher, the hole of an awl is not punched, but the material is ousted to the side. The hole will close around the thread and the fissure stayes tight and will not open. The big ring on the end of the hilt does not only look good, but can be used to pull the awl out of the leather.The grip and the ring are both torqued. The steel was sanded down only a little, so that the wrought iron character stays visible.Hint: It may be neccessary to sharpen the awl after using it on hard, thick upper leather.Material: steelLength: 20,5 cmWeight: app. 40 g This article is a medieval prop that is only produced in small quantities. For this reason, expensive food certification is uneconomical or would have a massive impact on the selling price. Therefore we are obligated to the following notice: Prop - not certified or suitable for contact with food.

The "Ulfric" cleaver was designed as a kitchen cleaver. The wide blade was designed along chinese cleavers and allows clean and fast working in the kitchen. Made from one massive piece of steel, the hatchet has a good weight to it. The torqued handle provides a safe grip and balances the cleaver very well. Be it the cutting of pork chops, chicken or simply the slicing of vegetables - this multifunctional kitchen helper will be a great assistant for any user. Just like with all our steel articles, we kept the working marks after sanding down the worst of metal flakes. This provides a rustic look to the piece and adds the distinguished "medieval" look to them. We recommend to wipe the cleaver regulary with Ballistol oil. This food proof oil will not resinify, will not turn rancid and is well suited for the caretaking of knifes and other steel items alike. Material: steel Total length: 27,5 cm Blades length: 14 cm Blades width: 6 cm Weight: app. 400 g This article is a medieval prop that is only produced in small quantities. For this reason, expensive food certification is uneconomical or would have a massive impact on the selling price. Therefore we are obligated to the following notice: Prop - not certified or suitable for contact with food.

The "Jackob" fork is a gread add on to our bestseller, the "Jackob" cutlery set. It is very suitable as a serving fork for cold meat and cheese plates. It can also be used as a regular for for eating. Matching our complete set, the working marks of the blacksmith were not removed, but kept; this underlines the rough character of the cutlery.The two long spikes are bent in an oval shape in the center. This is not only decorative, but helps serving meat or cheese slices.Material: steelLength: 20 cmWidth: 3,5 cmWeight: app. 50 g   This article is a medieval prop that is only produced in small quantities. For this reason, expensive food certification is uneconomical or would have a massive impact on the selling price. Therefore we are obligated to the following notice: Prop - not certified or suitable for contact with food.

This pretty fibula is used as fastener for cloaks and capes, but can also be attached just for decoration. It is made of robust steel and therefore also suitable for slightly thicker fabrics like wool.Material: SteelDiameter small fibula: 8cmDiameter large fibula: 10cm