Schleswig belt set

€3.90*

Prices incl. VAT plus shipping costs

Delivery time 2-5 days

Product number: 960205

Our benefits

Free shipping from 50€ (DE) / 150€ (NL,BE,PL+)
Great Quality for low prices
Choose from 5.000+ items

Product information "Schleswig belt set"

The two-piece belt set "Schleswig" consists of a belt tongue and a long buckle. Made of brass and cast by hand, it is inspired by belt decorations of the Vikings.

Suitable for belts from 1 cm to 1,5 cm wide

Material: brass
tongue dimensions: 1,3 cm x 6, 3 cm
Dimensions of the buckle: 2 cm x 7 cm

Customers also viewed

Sinold belt tongue with cross

Based on high medieval models and cast from fine bronze, the belt tongue "Sinold" adorns straps with a width of 3cm. Pins for riveting are not included; you can find them in our range of accessories. Material: bronze length: 7.7cm width: 3cm

€3.89*

Novgorod belt set

The two-piece belt set "Novgorod" consists of a belt tongue and a buckle. Made of brass and cast by hand, they are inspired by Viking-Age belt decorations. Suitable for belt widths from 1 to 2cmThis fitting has no pre-drilled holes, so you can decide where you need them. Just use a small metal drill to make them for your DIY project. Material: brasstongue dimensions: 1.5cm x 4.5cmbuckle dimensions: 2.5cm x 5.5cm

€3.90*

Danika buckle

A finely cast brass buckle. Ideal for closing narrow belts and straps. Suitable for belts up to 1,3 cm wide. Material: brass dimensions: 3,3 cm x 2,2 cm

€1.50*

Lunula pendant

"Lunula" pendants were widespread in the Roman Empire. These "Little Moons" were lucky charms and were worn especially by women and children. This replica is cast out of brass and can be worn with a thin leather strap or chain around the neck. Material: brass dimensions 3,7 cm x 1,8 cm A leather strap or chain is not included.

€1.50*

Customers also bought

Halfson belt tongue braided

Cast from fine bronze and carefully polished, the strap end "Halsfon" retains its original early medieval look. Suitable for all belts with a width of 1.5 cm to 2 cm. Pins for riveting are not included, but you can find them under accessories. It may be necessary to adjust the holes in the belt tongue slightly. Material: Bronze length 7,5 cm width 1,5 cm

€1.89*

Gotland belt set

The two-piece "Gotland" belt set consists of a tongue and a buckle. Both parts are cast by hand and are based on finds from the Viking Age. Suitable for belts up to 2.5cm wide Material: brassdimensions of the tongue: 2.1cm x 6.9cmDimensions of the buckle: 3.1cm x 5cm

€5.90*

Tinne brass pins 8 pcs.

With "Tinne" you get 8 brass nails - 1.6 mm round head pins made of solid brass MS-64 with a share of 64% copper and 36% zinc. Pins made of this alloy are very easy to shape when riveting and are thus ideal for attaching historic and fantastic fittings in medieval reenactment and LARP. Dimensions: 1.6 mm x 13 mm. Fix fittings and decorations with brass nails, how does that work? The fitting or decoration to be fastened is placed on the belt or pocket. Mark the required 2 mm holes in the desired places and punch the leather with an eel. Of course, using a pair of punch pliers is also possible, but the hole must not be too large then, because the leather is punched out and, as with the use of eels, can not contract again around the rivet. The head of the pin should of course be on the side that is visible later, the so-called "show side". Depending on the thickness of the material, shorten the brass pin on the pointed side to 1.5 mm - 2 mm and tap it in circular strokes with the smallest possible round hammer, so that a slightly arched head is formed and the fitting is solidly connected to the backing material. For smoothing a sandpaper with 600er Körning is recommended. For a better grip, you can also use a small washer, but the riveting is then not so medieval. Have fun crafting!

€0.49*

Alex shirt stitched eyelet cream

The "Alex" shirt distinguishes itself by the decorative lacing alongside the sleeves and its stitched eyelets. A standing collar as well as a lacing on the chest make it the ideal medieval costume.Material: cotton

€49.90*

Lyra fibula

This pretty fibula is used as fastener for cloaks and capes, but can also be attached just for decoration. It is made of robust steel and therefore also suitable for slightly thicker fabrics like wool.Material: SteelDiameter small fibula: 8cmDiameter large fibula: 10cm

Variants from €12.50*

€15.90*