Bron hood suede

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Gustav" series, this shield is not decorated, but meets the series' style with plain and undecorated beauty. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1.2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colour: blank, browned

The exact origin of mail is not known, but the earliest examples were found to be made in the 4th century BC. One of the earliest discoveries is the mail from the Hjortspring swamp in todays Denmark. In the 12th and 13th century it developed to the most important piece of armour in Europe. This chain mail is made for men with a medium chest circumference. It is wide enough to be worn on top of a gambesons. It is made with long sleeves and reaches down to, approximately, the knees.The blank chain mail is finished in shiny zinc; the rings are treated electro-chemically, and therefore need a little less treatment, than untreated models. The oil finished one needs more care, we suggest to use Ballistol machine oil on a regular basis for treatment. This chain mail fits best for wearers with a chest circumference of 90cm to 125cm.Classic 4-in-1 weaving pattern, blanklong sleevesInner ring diameter: 10mmOuter ring diameter: 12mmWire thickness: 1mmWeight: app. 13kgColour: blank For further information please click here!

The large "Wilhelm" arm shield is thought to be and upgrade to our chainmail shirts. Similar to a belt shield, those add ons can show the groups colours, insignia or heraldry. It is being fixed to the wearers upper arm with a belt and can be fastened to the mails rings by using a leather string. Made from armour steel, it is not only an additional armour plate, but also another nice detail on any existing costume. The shield can also be fastened to any other existing armour and clothing - there is no definite need for a chainmail. A gambeson can also be a good foundation: just sew a leather string to the sleeve and attach the shield there! You will only need some creativity and a little handywork. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. We suggest to order a leather string from our stock: this way you have everything at hand, when starting to built your new upgrade. Material: 1,2 mm steel Length: 27 cm Width: 23 cm Weight: app. 0,5 kg Colours: blank, browned