Collodion scar fluid

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Gustav" series, this shield is not decorated, but meets the series' style with plain and undecorated beauty. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1.2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colour: blank, browned

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Balthasar" series, this shield is decorated with rivets and a beading along the edge. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to üainting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1.2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colours: blank, browned

Blood can be used for the display of wounds and horror scenes: be it zombie or vampire attacks, wounds made by machetes and chain saws.Blood flows in large amounts on Halloween.This tube of fake blood from maskworld flows just like real blood: it drips and smeares very realistic and leaves marks in flat and smooth surfaces.Just think about what you can do with this to scare people...Fake blood will not remove from all fabrics and surfaces. Please be very careful when using it on materials, you do not want to get stained and read the package instructions.Material: fake blood 50ml tube Ingredients: Purified Water (Aqua), Propylene Glycol, Hydroxyethylcellulose, Triethanolamine, Diazolidinyl Urea, Methylparaben, Propylparaben, CI16035, CI42090, Benzyl, Alcohol

The garments we offer are made from high-quality fabrics. We avoid the use of chemicals and utilize dyes that are as mild and environmentally friendly as possible. For all those who enjoy taking up a needle and thread themselves or wish to further individualize their outfit, we now offer pre-cut lengths of our fabrics. Cotton has been planted and used to make clothes for over 6000 years. It is capable of absorbing moisture and thus keep it from the body. It is kind to the skin, durable, breathable, antistatic, heat-resistant and easy to dye. It does not become matted. It is hardly surprising, then, that it may be found in almost any closet. It is ideally suited for lighter and airy summer clothing, but may also be used as a lining material, for example for jackets and cloaks.Material: 100% cottonMeasurements: 300cm x 154cmWeight: 125g/m², approx. 570g