Vigor vambraces

€47.92*

% €59.90* (20% saved) previously €59.90*

Delivery time 2-5 days

Product number: 961710

Our benefits

Free shipping from 50€ (DE) / 150€ (NL,BE,PL+)
Great Quality for low prices
Choose from 5.000+ items

Product information "Vigor vambraces"

The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of tabletop miniatures. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn, but well-cared-for character. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand, it is unique for every single armour. However, if you’d prefer your armour unburnished, you can also easily remove the burnishing layer using a soft abrasive fabric.

The vambraces are rather slender in comparison to the rest of the armour parts. For that reason, they will not hinder you when carrying a shield. They consist of three slightly curved segments and feature a comfortable cutout for your hand as well as slightly bent edges around the wrist, which significantly increase wearing comfort.

It goes without saying that all edges of these armour pieces are beaded.

Material: steel, leather

Vambraces:
Length: 34cm
Circumference (upper strap): 24cm
Circumference (lower strap): 13cm
Weight (pair): approx. 1.5kg

The parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight.
Adjustments to several of the measurements are possible by carefully bending the respective armour parts.

Customers also viewed

Vigor greaves

Our "Vigor" armour was designed for the more imposing characters on the battlefield – referring not only to their formidable fighting style. This armour set’s generous dimensions make it comfortable for longer periods of time even for powerfully built warriors of both genders. However, a small tweak in design also allows adjusting "Vigor" to slender people. To do so, you simply have to remove the central tasset from the armour belt and, if necessary, shorten the belt. In so doing, you can improve the fit for wearers with slimmer hips. The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of tabletop miniatures. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn, but well-cared-for character. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand, it is unique for every single armour. However, if you’d prefer your armour unburnished, you can also easily remove the burnishing layer using a soft abrasive fabric.The greaves are long enough to also protect the wearer’s knees. The upper part is mounted to be movable, making movements such as kneeling easier. The sweeping knee protection is another very special design element of this armour set. Broad cutouts for your feet as well as bent edges increase wearing comfort. It goes without saying that all edges of these armour pieces are beaded. Material: steel, leatherGreaves: Length: 52cm Circumference (upper strap): 26cm Circumference (lower strap): 20cm Weight (pair): approx. 4kg The parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight. Adjustments to several of the measurements are possible by carefully bending the respective armour parts.

€79.92* €99.90* (20% saved)
previously €99.90*

Connor chainmail bracers oiled

The "Connor" chain bracers are inspired by historical finds and offer the protection of chain mail in combination with the comfortable wearing of leather bracers. They are closed at the back with 2 leather straps & buckles. The chain mesh is sewn all around with the bracers and edged with suede. We recommend combining them with padded bracers or arm wraps to protect against bruises and abrasions.In this variant, the chain mesh is only oiled to protect against rust. So if you want a rusty look, e.g. for robbers or orcs, you can remove the oil from the chain mesh and then let it rust.Material: leather, steelDimensions: 28 cm x 24 cm

€39.91* €49.90* (20.02% saved)
previously €49.90*

Only 1 available

Vigor torso armour

Our "Vigor" armour was designed for the more imposing characters on the battlefield – referring not only to their formidable fighting style. This armour set’s generous dimensions make it comfortable for longer periods of time even for powerfully built warriors of both genders. However, a small tweak in design also allows adjusting "Vigor" to slender people. To do so, you simply have to remove the central tasset from the armour belt and, if necessary, shorten the belt. In so doing, you can improve the fit for wearers with slimmer hips. The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of tabletop miniatures. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn, but well-cared-for character. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand, it is unique for every single armour. However, if you’d prefer your armour unburnished, you can also easily remove the burnishing layer using a soft abrasive fabric. At the heart of "Vigor" is the broad torso armour, which the large bevor can be attached to using buckles. The torso armour consists of flexibly connected chest and back plates. The lower parts protecting the chest and back consist of moving plates. Two straps on either side are used to close the torso armour and adjust the fit. It goes without saying that all edges of these armour pieces are beaded. Material: steel, leather Torso: Chest width: 67cm Length (shoulders to lower segment): 55cm Width neck cutout: 18cm Weight: approx. 5.3kgThe parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight. Adjustments to several of the measurements are possible by carefully bending the respective armour parts.

€199.92* €249.90* (20% saved)
previously €249.90*

Customers also bought

Heinrich Dolch Stahl 2nd Edition

The second edition of our popular foam weapons has been crafted from a new material. It's more tear-resistant than our previous foam and absorbs the impact energy better. Additionally, we've redesigned the grip wrappings, ensuring that you can always handle your foam weapon well and securely even in heated battles. The "Heinrich" Dagger from the "Battle Standard" series complements many character concepts. It features a classic disk pommel and an upward-slanting guard. The blade is adorned with a midrib, tapering gently towards the tip. Available in Gold and Steel colours, it serves as a versatile accessory and a swift weapon when needed. With its wide guard, "Heinrich" is also ideal for use as a left-hand parrying weapon. Material: Foam, Fibreglass Overall Length: 46 cm Blade Length: 29 cm Width (Guard): 13 cm Disclaimer: All items shown here have been specifically designed for safe combat representation in live-action role-playing, on theatrical stages, or similar settings. The foam weapons consist of a fibreglass core rod completely enveloped in soft foam to prevent injuries.

€29.90*

Markward spaulders small

The small spaulders of the "Markward" series have a long upper arm segment, which is connected to the two-part shouldersegmenet. The deceived lamellar does not just serve the ornament, it also gives additional stability. Not only the excellent price make the small spoulders "Markward" special. Their slim cut and compact design make them ideal for the addition of lighter and heavier armour. Of course, these spaulders are compatible with all Mytholon armour gorgets. Material: 1.2 mm steel Length: 32 cm Weight 1.65 kg Colour: blank, browned

€39.91* €49.90* (20.02% saved)
previously €49.90*

Gustav gorget

This simple gorget is made to fit our armour series Gustav. You wear it over your breastplate and it has got two buckle straps on both sides to attach the spaulders. Wear it underneath the breast plate to cover your neck and still be able to attach all of the Mytholon range.Material: 1,2mm steelFront length: 23cmTotal length: 29cm

€23.92* €29.90* (20% saved)
previously €29.90*

Tip

Catalog 2023/24 (DE/EN)

Our new 2023/24 catalog as a print edition to get inspiration, plan outfits, mark your favorites or just browse. The print edition is also available in our shops and in small quantities at our market stands. At events, only while stocks last.Alternatively, click here for the online version of our catalog. You can find our catalog archive under this link.Material: Paper116 pages

€2.00*