A classical spangenhelmet with facemask typically for the crusaders´period and an early form of the "great helmet". It has got a cotton covered foam padding on the inside and two leather straps to make it fit tightly to the head.
THE universal spray made by the Ballistol company. Can be used for metal, just as well as leather and various other materials. A well known care product for animals paws and fur; a true allrounder, completly untoxic. We advise it for metal armour care and protection of leather armours.The practical 50ml spray can for your journeys, or the large 200ml spray can for your home.Please read the containers warnings section.Can not be exported outside the EU due to EU-law.
A classical "spangenhelmet" with facemask typically for the crusaders´period and an early form of the "great helmet". It has got a cotton covered foam padding on the inside and two leather straps to make it fit tightly to the head.Material: 1,2mm SteelCircumference: 61cm
According to its shape the helmet "Francis" is a kind of kettle helmet from the late middle ages. This version has got a very long drawn brim that makes for a specially good face protection but limits the sight of the wearer a lot more than the standard kettle helmets.It has got a cotton covered foam padding on the inside and two leather straps to make it fit tightly to the head.Material: 1mm Steel
A classical viking helmet with a long nasal. It has got pretty curved applications in the front. The pointed toppart is reinforced with two crosswisely riveted steel straps. This gives it a militant look and makes it more robust against blows. It has got a cotton covered foam padding on the inside and two leather straps to make it fit tightly to the head.Material: 1mm Steel
The "Vladimir" greaves are made of curved segments decorated with beading and rivets. The knee tile is movable so that it does not restrict mobility in combat. A peculiarity of these leg rails is that they are also closed on the back of the calf.
Material: SteelLength: 53 cmWeight 4.8 kgColour: blank, browned
Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Markward" series, this shield is decorated with the typical cut edges on the top. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece.
The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place.
Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper of 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals or writings with weatherproof acrylic paint.
Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colour: blank, browned
The padded coif "Leopold" is, like a classic coif, fixed under the chin with two sturdy ribbons of cotton. Under a helmet, it gives this considerably more wearing comfort and protective effect. Of course, it can also be worn as a stand-alone headgear.
Material: Cottoncanvas
Unisize
Filling: Polyester
Weight: 150 g
Colours: Black, brown, cream
This pretty fibula is used as fastener for cloaks and capes, but can also be attached just for decoration. It is made of robust steel and therefore also suitable for slightly thicker fabrics like wool.Material: SteelDiameter small fibula: 8cmDiameter large fibula: 10cm
Where else do you get two great features at once? Here, with these bracers: not only do they protect your forearm, but also do they hold a throwing dagger in a sheath. Made from heavy leather uppers, you have defense and active knife-throwing linked together. The bracer is adjusted with three straps to your forearm. You can fit our own "Silas" throwing dagger into the sheath - but may also place any other dagger with standard size in it. Great piece for all rangers, thiefs and bandits, which was also seen with priests and mages as well.Material: leather uppersSide: available for right and left forearmMeasurements: 22cm length, 26cm circumfenceThe price is for one single bracer.Leather
is a product of nature and may take dyes differently. The actual hue
may differ from the image.
€34.90*
Over 25 years of experience
Choose from 5,000+ items
Free shipping from 50€ (DE) / 150€ (FR,IT,ES+)
Express-Shipping within 24h (DE)
This website uses cookies to ensure the best experience possible. More information...