Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Gustav" series, this shield is not decorated, but meets the series' style with plain and undecorated beauty. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1.2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colour: blank, browned

The small "Wilhelm" arm shield is thought to be and upgrade to our chainmail shirts. Similar to a belt shield, those add ons can show the groups colours, insignia or heraldry. It is being fixed to the wearers upper arm with a belt and can be fastened to the mails rings by using a leather string. Made from armour steel, it is not only an additional armour plate, but also another nice detail on any existing costume. The shield can also be fastened to any other existing armour and clothing - there is no definite need for a chainmail. A gambeson can also be a good foundation: just sew a leather string to the sleeve and attach the shield there! You will only need some creativity and a little handywork. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. We suggest to order a leather string from our stock: this way you have everything at hand, when starting to built your new upgrade. Material: 1,2 mm steel Length: 23 cm Width: 17 cm Weight: app. 0,5 kg Colours: blank, browned

The large "Wilhelm" arm shield is thought to be and upgrade to our chainmail shirts. Similar to a belt shield, those add ons can show the groups colours, insignia or heraldry. It is being fixed to the wearers upper arm with a belt and can be fastened to the mails rings by using a leather string. Made from armour steel, it is not only an additional armour plate, but also another nice detail on any existing costume. The shield can also be fastened to any other existing armour and clothing - there is no definite need for a chainmail. A gambeson can also be a good foundation: just sew a leather string to the sleeve and attach the shield there! You will only need some creativity and a little handywork. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. We suggest to order a leather string from our stock: this way you have everything at hand, when starting to built your new upgrade. Material: 1,2 mm steel Length: 27 cm Width: 23 cm Weight: app. 0,5 kg Colours: blank, browned

A simple but stylish cloak. What is special about it is the binding. Two long straps have to be crossed over the chest, behind the back and knotted around the belly. Thus the cloak stays in place and does not pull at the throat even if the wearer is moving a lot. It goes along perfectly well with armour as it will cover the binding in the front and the cloak will fit nicely around the collar.

The large spaulders of the "Markward" series have a long upper arm segment, which is attached to the generously designed shouldersegmenet. The deceived drawers not only serve the ornament, it also gives additional stability. The excellent price make the big shoulders "Markward" special. Their imposing, carefully shaped shoulder segments are ideal for the addition of heavy armor. Of course, these shoulders are compatible with all Mytholon gorgets. Material: 1, 2mm steelLength: 30 cmWeight: 2 kgColour: blank, browned