Información sobre el producto "Balthasar spaulders large"
These are our big "Balthasar" spaulders. Just the right thing for knights and other nobles. Although they are rather big and decorated, these spaulders are "ready for the field". The spaulders are composed from seven parts and therefore very flexible in movement.
THE universal spray made by the Ballistol company. Can be used for metal, just as well as leather and various other materials. A well known care product for animals paws and fur; a true allrounder, completly untoxic. We advise it for metal armour care and protection of leather armours.The practical 50ml spray can for your journeys, or the large 200ml spray can for your home.Please read the containers warnings section.Can not be exported outside the EU due to EU-law.
The small shoulders "Balthasar " provide high stability with maximum mobility. Each of the four flexibly connected segments was fitted with a bead and the typical Balthasar riveting strip. This does not only look very noble, it also significantly increases the stability of the segments. Together with sturdy rivets made of solid steel, these shoulders hold many battles without deforming. They are well suited to complement a ' noble ' armor and for all armor carriers that want to show some prosperity.
Like all Mytholon plate shoulders, this one is of course compatible with all our plates gorgets.
Material: SteelLength: 31 cmWeight: 1.5 kgsColours: blank, burnished
The "Balthasar" gorget is a very stylish piece of armour. Elegant lines and decorative rivets along its edges, make it stand out of the mass.This gorget can also be combined with all other Mytholon spaulders. To make them look their best we recommend combining them with other "Balthasar" armour parts.There are two different "Balthasar" gorgets.
We recommend the smaller size for the leaner necks of ladies and adolescents.
We recommend the larger size for gentlemen.Small: Length front part: 23cmTotal width: 29cmLarge:Length front part: 29cmTotal width: 36cm
Material: 1,2mm SteelColours: blank, brownedYou can find all our "Balthasar" series products here.Maybe take a look at our Padded Jackets to wear them underneath your Armour. This maximizes the comfort wearing it.
Our small "Adam" spaulders are perfectly suited to be worn as additional armour over chainmail or leather armour. Due to their size and the flexible lamellae covering the upper arms, these pieces will not encumber you in any way.Material: 1.2mm steelColour: blank, browned
The "Balthasar" gorget is a very stylish piece of armour. Elegant lines and decorative rivets along its edges, make it stand out of the mass.This gorget can also be combined with all other Mytholon spaulders. To make them look their best we recommend combining them with other "Balthasar" armour parts.There are two different "Balthasar" gorgets.
We recommend the smaller size for the leaner necks of ladies and adolescents.
We recommend the larger size for gentlemen.Small: Length front part: 23cmTotal width: 29cmLarge:Length front part: 29cmTotal width: 36cm
Material: 1,2mm SteelColours: blank, brownedYou can find all our "Balthasar" series products here.Maybe take a look at our Padded Jackets to wear them underneath your Armour. This maximizes the comfort wearing it.
The "Balthasar" gorget is a very stylish piece of armour. Elegant lines and decorative rivets along its edges, make it stand out of the mass.This gorget can also be combined with all other Mytholon spaulders. To make them look their best we recommend combining them with other "Balthasar" armour parts.There are two different "Balthasar" gorgets.
We recommend the smaller size for the leaner necks of ladies and adolescents.
We recommend the larger size for gentlemen.Small: Length front part: 23cmTotal width: 29cmLarge:Length front part: 29cmTotal width: 36cm
Material: 1,2mm SteelColours: blank, brownedYou can find all our "Balthasar" series products here.Maybe take a look at our Padded Jackets to wear them underneath your Armour. This maximizes the comfort wearing it.
Puttees have been in use from the Iron Age until the medieval times. It was "reinvented" by the military and used as regular equipment for soldiers in World War I. and in the second World War. Be it Roman legionary or french soldier: this easy to put on leg dress warmes the calfs and protects from scratches and bruises. Our "Hamond" puttees are made from robust canvas fabric. With its 380 cm length, it can be used for wrapping up to the knee - even thicker calfs should get their share of warmth. Early medieval costumes, such as germanic tribesmen or Wikings, will find a good use when strolling through the woods in cold days - it keeps dry and warm and does not only function as an accessory. Leather strings or hidden fixing pins close the puttees and secure them tightly on the place.
Material: canvas Length: app. 380 cm Width: 12,5 cm Weight (pair): app. 350 g Colours: brown, grey, cream, black
The "Balthasar" gorget is a very stylish piece of armour. Elegant lines and decorative rivets along its edges, make it stand out of the mass.This gorget can also be combined with all other Mytholon spaulders. To make them look their best we recommend combining them with other "Balthasar" armour parts.There are two different "Balthasar" gorgets.
We recommend the smaller size for the leaner necks of ladies and adolescents.
We recommend the larger size for gentlemen.Small: Length front part: 23cmTotal width: 29cmLarge:Length front part: 29cmTotal width: 36cm
Material: 1,2mm SteelColours: blank, brownedYou can find all our "Balthasar" series products here.Maybe take a look at our Padded Jackets to wear them underneath your Armour. This maximizes the comfort wearing it.
A simple, but effective, armour for thigh and knee. Easy to combine with greaves, it offers good protection for your weaker part of the armoured body.The armour is strapped to the wearers hip by using belts and can be adjusted to the bodylength individually.The entire armour consists of eight pieces each and is therefore very flexible.Material: 1,2mm steelColour: blank, browned
A small pouch made from suede. It is being closed with two leather straps and can be tied to your belt by using them.A very simple, but oftentimes used item for all kinds of different "treasures". Available in two classic leather dies: brown and black.Material: suedeDiameter: app. 26cm
The torso armour from our "Balthasar" series consists of two pieces: the chest and the back plate. Both are connected with a strap on each side and a strap on either side of the shoulders. That allows an individual adjustment for each wearer. The chest plate is made from seven seperate segments which are riveted to each other. Its moving parts underneath the arms allow a free movement and agility of the wearer. The elaboratly made back plate is rigid and decorated with lots of rivets. The lower two segments are moveable and allow a bending of the upper body. The matching big spaulders can be attached to the shoulders of the armour. Rolling shapes and segments, just as the offset bordering and the decoration with rivets, add structure and character to this great armour. We suggest to wear a padded gambeson underneath all metal armours to avoid scratches and bruises on the body. This adds lots of comfort when wearing the armour.Material: 1,2mm steelCircumference (chest): app. 115cm to 130cmLength: 72cmNeck: 21cmWeight (chest): app. 4,2kgWeight (back): app. 4,4kg
Lacing shirt, pirate shirt, medieval shirt...First risen to
popularity in the Middle Ages, this shirt is known by many names today.
Lacing shirts like this are associated with the Renaissance, brave
musketeers, pirates and swashbucklers, but also flower power kids from
the 1960s. Ever since this shirt has become a staple of the fantasy and
medieval world, we call it costume shirt.Made from sturdy cotton
by Mytholon, this shirt is available in a wide variety of colours. It
serves as a basis for historical outfits – or costume, as it were, like
few other garments do.The lacing allows the shirt to be worn
open on warm days and tied close when it's cold outside. The sleeves are
very generously cut and allow great freedom of movement when fighting
and dancing. The wide cuffs are each closed by means of a lacing.This is a shirt for many occasions, not only as a costume, but also as a comfortable leisure shirt.Material: cotton canvasSizes: S to XXL
This is the matching padded coif from our "Arthur" series.The coif is available in three sizes and therefore fits most heads. We suggest to wear it underneath coifs of mail or helmets. This maximizes the comfort wearing them and prevents bruises and scratchmarks.Material: Canvas, PolyesterSizes: S, M, LColours: brown and black
S: up to approximately 60 cm head circumferenceM: up to approximately 63 cm
L: up to approximately 70 cm
The hood is approximately 0.5 cm thick.
The shirt
"Umberto" is made of light linen fabric. It has a reinforced shirt
breast as well as a wide reinforced collar and wide cuffs. It is ideal
to be worn under vests and doublets. A perfect shirt for warm days, not
only for musketeers and pirates. Material: linen fabric (50 % linen, 50 % cotton)
The "Tika" bodice is simply cut, making it suitable for a variety of costume ideas. With lacing on the front, the fit can be adjusted optimally. Whether tavern maid or adventurer, juggler or court lady, combine this comfortable bodice again and again as you like.
Material: 100% cottonSizechart:
S
M
L
XL
XXL
Chest circumference
91
99
108
120
133
Waist circumference
76
84
93
106
120
Hip circumference
102
108
115
125
136
Width of shoulders
35
36
37
38
39
HPS length
52
53
54
55
56
All figures are in cm. Our products are handmade, dimensions and colours may therefore differ slightly.
25,89 €*
Más de 25 años de experiencia
Selección entre 5.000+ artículos
Envío gratis a partir de 100€ (DE)
Entrega exprés en 24 horas (DE)
Este sitio web utiliza cookies para garantizar la mejor experiencia posible. Más información...