These are our big "Balthasar" spaulders. Just the right thing for knights and other nobles. Although they are rather big and decorated, these spaulders are "ready for the field".The spaulders are composed from seven parts and therefore very flexible in movement.Material: 1.2mm steelColours: blank, browned

Our small "Adam" spaulders are perfectly suited to be worn as additional armour over chainmail or leather armour. Due to their size and the flexible lamellae covering the upper arms, these pieces will not encumber you in any way.Material: 1.2mm steelWidest arm circumference: 56 cmTightest arm circumference: 34,5 cmColour: blank, browned

The "Balthasar" gorget is a very stylish piece of armour. Elegant lines and decorative rivets along its edges, make it stand out of the mass.This gorget can also be combined with all other Mytholon spaulders. To make them look their best we recommend combining them with other "Balthasar" armour parts.There are two different "Balthasar" gorgets. We recommend the smaller size for the leaner necks of ladies and adolescents. We recommend the larger size for gentlemen.Small: Length front part: 23cmTotal width: 29cmLarge:Length front part: 29cmTotal width: 36cm Material: 1,2mm SteelColours: blank, brownedYou can find all our "Balthasar" series products here.Maybe take a look at our Padded Jackets to wear them underneath your Armour. This maximizes the comfort wearing it.

The Bracers "Albrecht" are made of high-quality upper leather. They consist of three riveted segments and an additional wrist guard they are closed with two straps and adapt well to the shape of the arm. Material: Upper leather  Length: 26 cm, Width 24 cm on the crook, 18 cm on the wrist Colours: Black, brown, red Leather is a natural product and reacts differently to dye products. The hue may differ from the picture.    

The "Balthasar" gorget is a very stylish piece of armour. Elegant lines and decorative rivets along its edges, make it stand out of the mass.This gorget can also be combined with all other Mytholon spaulders. To make them look their best we recommend combining them with other "Balthasar" armour parts.There are two different "Balthasar" gorgets. We recommend the smaller size for the leaner necks of ladies and adolescents. We recommend the larger size for gentlemen.Small: Length front part: 23cmTotal width: 29cmLarge:Length front part: 29cmTotal width: 36cm Material: 1,2mm SteelColours: blank, brownedYou can find all our "Balthasar" series products here.Maybe take a look at our Padded Jackets to wear them underneath your Armour. This maximizes the comfort wearing it.

The "Balthasar" gorget is a very stylish piece of armour. Elegant lines and decorative rivets along its edges, make it stand out of the mass.This gorget can also be combined with all other Mytholon spaulders. To make them look their best we recommend combining them with other "Balthasar" armour parts.There are two different "Balthasar" gorgets. We recommend the smaller size for the leaner necks of ladies and adolescents. We recommend the larger size for gentlemen.Small: Length front part: 23cmTotal width: 29cmLarge:Length front part: 29cmTotal width: 36cm Material: 1,2mm SteelColours: blank, brownedYou can find all our "Balthasar" series products here.Maybe take a look at our Padded Jackets to wear them underneath your Armour. This maximizes the comfort wearing it.

Our "Lena" armour series was especially designed for warrior princesses and shield maidens alike. We distanced from historical patterns and steped closer to a rather fantastic shape. The outcome was a not only a long awaited womens armour, but also a costume set of in the form of a worthy armour set. Be it an Amazone, a warrior princess or an exalted priestess - all of them are possible by combining the armour with the right clothing pieces...Only your imagination limits the possibilities. For all you ladies out there: this is the right armour, not only on LARP events.The "Lena" series gorget appears smaller and more delicate than most other plate metal gorgets. despite of this, it works just as good as a plate spaulder carrier with the two buckle/straps on the sides. It is being closed with a simple strap and can be closed by the wearer when fully armed.You can wear all our spaulders from all series in combination with this gorget.Younger heroes, kids and smaller persons can wear this gorget in a combination with the small spaulders from the "Adam", "Balthasar" and "Markward" series.If your costume creation allows a padded gorget - we suggest to wear padding underneath all metal armour pieces, as this prevents bruises and scratches when being armed.Material: 1,2mm steelNeck circumference: app. 44cmLength of the front segment: 10cmLength of the back segment: 10cmWidth: 27cmWeight: app. 600gr

The collar of the “Mina” armour is functionally designed and defined by a clearly curved linework. Its slim construction gives it a calm, well-balanced appearance. Riveted edge flanges structure the surface and reference a classic design element of modern plate armour, allowing the collar to be easily combined with a wide range of other armour components. The collar is constructed so that it does not overlap with either the breastplate or shoulder pieces. This ensures a high degree of freedom of movement and allows for creative flexibility when combining it with additional armour elements or costume components. The collar is fastened with a cartridge-belt style closure, providing a secure and stable fit.Material: 1,2 mm steelCircumference (neck): 44 cm Length: 37 cm Width: 25,5 cm Weight: app. 800 g Colour: blank, browned

The small pauldrons of the “Markward” series feature a long upper arm segment that is flexibly connected to the two-part shoulder segment. The articulated design is not merely a visual detail but also adds additional stability to the construction. In addition to their excellent price-performance ratio, the small “Markward” pauldrons stand out for their slim cut and compact build. This makes them equally suitable for complementing both light and heavy armour. Naturally, these pauldrons are compatible with all Mytholon gorgets. Material: 1.2 mm steelLength: 32 cmWidest arm circumference: 56 cmTightest arm circumference: 34,5 cmWeight 1.65 kgColour: blank, browned