Katharina Bracers

39,95 €*

% 79,90 €* (ahorro del 50%)

Precios con IVA incluido, más gastos de envío

Tiempo de entrega 2-5 días

Color

Product group

plate armor

Número de producto: 963135

Nuestras ventajas

Envío gratuito a partir de 150€ (ES+)
Más de 25 años de experiencia
Elija entre más de 5.000 artículos

Información sobre el producto "Katharina Bracers"

The bracers of the Katharina armour are designed with a shorter length, seamlessly aligning with the elbow tile of the modular arm guard. They are adorned with a graceful curved element, mirroring the design found on the greaves and tassets. These bracers are also available in an economical set with the greaves.
All components of this armour are naturally flanged to ensure safety for you and your fellow participants. The inner parts have been painted to protect against rust, although this paint may peel over time. We recommend regular maintenance with oil, such as the Ballistol available from us.

Material: Steel
Length (Side): 17.5 cm
Length (Center): 22 cm Width
(Wrist): 11.5 cm

Los clientes también vieron

Katharina arm guard with spaulders

The arm guard of the Katharina armour is a modular set and already includes the spaulders. You can decide whether you want to wear only the spaulders, the spaulders with an additional upper arm segment or as a complete arm guard together with the shaped elbow tile. All segments are connected with straps and buckles, so you can adjust the arm guard optimally to your arms. Of course, all parts of the armament are flanged to ensure the safety of you and your fellow players. On the inside, the parts have been painted to protect against rust. This varnish can peel off over time. We recommend regular care with oil, e.g. with Ballistol, which is available from us. Material: Steel, LeatherLength top shoulder plate: 19cmWidth top shoulder plate: 31 cmLength entire spaulder: 40 cm to 26 cm (adjustable)

84,95 €* 169,90 €* (ahorro del 50%)

Katharina Armor Belt

For optimal mobility of the Katharina armour and a good fit, we have separated the upper and lower parts of the torso armour. The Katharina armour belt forms the lower part of the torso and is worn beneath the breastplate. It is fastened with a wide leather strap at the back. The size of the armour belt can be adjusted individually using the strap and by carefully bending it. The tassets are attached to the four front straps, which we offer separately, as well as in a convenient set along with the armour belt. Other tassets from our 'Mytholon Artware' armours can also be combined with these armour belts, such as Lambert, Galahad, Ortwin, or Edward. All parts of this armour are naturally fluted to ensure safety for you and your fellow participants. The inner parts have been painted to protect against rust, although this paint may peel off over time. We recommend regular maintenance with oil, such as the Ballistol available from us. Material: Steel.Width Center Front: 22,5 cmWidth Side: 9,5 cmLength Metal: 66 cmEntire Length: 83 cm - 115 cm

34,95 €* 69,90 €* (ahorro del 50%)

Katharina Greaves

The Katharina greaves feature a classic cut adorned with a graceful curved element, echoing the design found on the bracers and tassets of the Katharina armour. They are secured with two sturdy straps, allowing for adjustable sizing. All components of this armour are naturally flanged to ensure safety for you and your fellow participants. The inner parts have been painted to protect against rust, although this paint may peel over time. We recommend regular maintenance with oil, such as the Ballistol available from us. Material: Steel Length Side: 26 cmLength center front: 33,5 cmWidth at ankle: 12 cm

49,94 €* 99,90 €* (ahorro del 50.01%)

Katharina Tassets

The tassets of the Katharina armour are fastened to the straps of the armour belt with buckles. Their height and angle can thus be optimally adjusted. They continue the curved design typical of this armour and visually round off this set. The tassets can also be combined with other armour belts and torsos from our range, such as Lambert, Galahad, Edward and Georg. Material: SteelLength: 29 cm Width Top: 18 cm

34,95 €* 69,90 €* (ahorro del 50%)

Katharina arm guard with spaulders

Variantes de 84,95 €*

92,45 €* 184,90 €* (ahorro del 50%)

Clientes que también compraron

Hilde fibula

The "Hilde" fibula made from bronze adds a smaller decorative fibula to our line of products by demand. It can for example be used to fix our arm wraps or puttees. Material: BronzeLength: 2,8cmWidth: 3,2cmLength of thorn: 4cm

6,50 €*

Katharina Greaves

49,94 €* 99,90 €* (ahorro del 50.01%)

Katharina arm guard with spaulders

84,95 €* 169,90 €* (ahorro del 50%)

Lena choker

Our "Lena" armour series was especially designed for warrior princesses and shield maidens alike. We distanced from historical patterns and steped closer to a rather fantastic shape. The outcome was a not only a long awaited womens armour, but also a costume set of in the form of a worthy armour set. Be it an Amazone, a warrior princess or an exalted priestess - all of them are possible by combining the armour with the right clothing pieces...Only your imagination limits the possibilities. For all you ladies out there: this is the right armour, not only on LARP events.The "Lena" neck choker is armour and accessory at the same time. It finishes off the "Lena" armour to the top and enlongens the wearers neck. This way the female warrior appears longer and the elfen princess even more raised. The buckle on the backside and a slight, carefull bending allow the chocker to be adjusted even to larger necks by the wearer individually. The chocker is being worn on top of the gorget and does not need any additional attachment. The choker can be worn without any armour as a piece of jewllery; this makes this plate armour piece something special for the women.As always: all edges and points are beaded for additional protection.Material: 1.2mm steelNecks circumference: app. 30cm (+ leather strap)Length: 11cmWeight: app. 200gr

19,90 €*

Balthasar spaulders small

The small shoulders "Balthasar " provide high stability with maximum mobility. Each of the four flexibly connected segments was fitted with a bead and the typical Balthasar riveting strip. This does not only look very noble, it also significantly increases the stability of the segments. Together with sturdy rivets made of solid steel, these shoulders hold many battles without deforming. They are well suited to complement a ' noble ' armor and for all armor carriers that want to show some prosperity. Like all Mytholon plate shoulders, this one is of course compatible with all our plates gorgets. Material: SteelLength: 31 cmWeight: 1.5 kgsColours: blank, burnished

63,91 €* 79,90 €* (ahorro del 20.01%)