Saltar al contenido principal Saltar a la búsqueda Saltar a la navegación principal

Lisig buckle

Información sobre el producto "Lisig buckle"

A stable brass buckle with pin to use on a belt, armour or for other attachments. The northern decoration is especially recommended for vikings or tribals.

Material: Brass
Length: 4,5cm
Width: 4,5cm
max. belt width: 3cm

Omitir la galería de productos

Los clientes también vieron

Tasso buckles
Tasso buckles

A pair of stable brass buckles with pin to use on a belt, armour or for other attachments. This item is sold in pairs. Material: BrassLength: 22mmWidth: 18mmmax. rim width: 8mm

Precio normal: 5,90 €
Hilde fibula
Hilde fibula

The "Hilde" brooch is made of bronze and features a simple, functional design. It is ideal for fastening arm and leg wraps or closing lighter fabrics. Thanks to its understated shape, "Hilde" can be used both as a practical accessory and a decorative element—suitable for a wide range of garments. Material: Bronze Width: approx. 3.2 cm Height: approx. 2.8 cm Pin length: approx. 4 cm All measurements are in centimetres. As our products are handmade, slight variations in size and colour may occur. Colours shown in photographs or on screens may not be accurately represented.

Precio normal: 6,50 €
Fire bowl
Fire bowl

This fire bowl is great to use in your garden, in the park, on medieval markets or on liveroleplay events. It can be taken apart for transport by three bolts, which makes it ideal for events. The fire bowl protects the ground from fire damages. Attention please: Before using the fire bowl on events, contact the organizers about rules for open fire, fire prevention measures and ash disposal. Material: Coated steelStanding height: ~10cmDiameter: 39cm

Precio normal: 26,91 €
Omitir la galería de productos

Clientes que también compraron

Halfson belt tongue braided
Halfson belt tongue braided

Cast from fine bronze and carefully polished, the strap end "Halsfon" retains its original early medieval look. Suitable for all belts with a width of 1.5 cm to 2 cm. Pins for riveting are not included, but you can find them under accessories. It may be necessary to adjust the holes in the belt tongue slightly. Material: Bronze length 7,5 cm width 1,5 cm Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

Precio normal: 1,89 €
Gunda buckle brass
Gunda buckle brass

"Gunda" is made similar to buckles from the 14th-15th centuries. It is cast by hand from brass and is suitable for belts up to 18 mm wide.Material: brassWidth: 35 mm

Precio normal: 1,90 €
Gotland belt set
Gotland belt set

The two-piece "Gotland" belt set consists of a tongue and a buckle. Both parts are cast by hand and are based on finds from the Viking Age. Suitable for belts up to 2.5cm wideYou can attach the fittings with small rivets or yarn. Material: brassdimensions of the tongue: 2.1cm x 6.9cmDimensions of the buckle: 3.1cm x 5cmNo rivets included. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

Precio normal: 5,90 €
Tinne brass pins 8 pcs.
Tinne brass pins 8 pcs.

With "Tinne" you get 8 brass nails - 1.6 mm round head pins made of solid brass MS-64 with a share of 64% copper and 36% zinc. Pins made of this alloy are very easy to shape when riveting and are thus ideal for attaching historic and fantastic fittings in medieval reenactment and LARP. Dimensions: 1.6 mm x 13 mm. Fix fittings and decorations with brass nails, how does that work? The fitting or decoration to be fastened is placed on the belt or pocket. Mark the required 2 mm holes in the desired places and punch the leather with an eel. Of course, using a pair of punch pliers is also possible, but the hole must not be too large then, because the leather is punched out and, as with the use of eels, can not contract again around the rivet. The head of the pin should of course be on the side that is visible later, the so-called "show side". Depending on the thickness of the material, shorten the brass pin on the pointed side to 1.5 mm - 2 mm and tap it in circular strokes with the smallest possible round hammer, so that a slightly arched head is formed and the fitting is solidly connected to the backing material. For smoothing a sandpaper with 600er Körning is recommended. For a better grip, you can also use a small washer, but the riveting is then not so medieval. Have fun crafting!

Precio normal: 0,49 €