Markward belt shield

14,90 €*

Precios con IVA incluido, más gastos de envío

Tiempo de entrega 2-5 días

Color

blanco

bruñido

Número de producto: 971110

Nuestras ventajas

Envío gratuito a partir de 100€ (DE)
Envío exprés en 24h (DE)
Elija entre más de 5.000 artículos

Información sobre el producto "Markward belt shield"

The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place.

Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper of 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals or writings with weatherproof acrylic paint.

Material: 1,2 mm steel
Length: 24 cm
Width: 18 cm
Weight: app. 350 g
Colour: blank, browned

Accessory Items

Ballistol spray

THE universal spray made by the Ballistol company. Can be used for metal, just as well as leather and various other materials. A well known care product for animals paws and fur; a true allrounder, completly untoxic. We advise it for metal armour care and protection of leather armours.The practical 50ml spray can for your journeys, or the large 200ml spray can for your home.Please read the containers warnings section.Can not be exported outside the EU due to EU-law.

3,90 €*

Detalles

Kunden haben sich auch angesehen

Markward belt shield

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Markward" series, this shield is decorated with the typical cut edges on the top. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper of 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals or writings with weatherproof acrylic paint. Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colour: blank, browned

13,90 €*

Arthur gambeson set black

The parts of the "Arthur" gambeson series are stiched in diamond-shape. This allows a good mobility without reducing the protection. The vest is closed by four roll buckles on the front. At the armholes and at the bottom hem, it is fogged with brass eyelets on which the sleeves and tassets are fixed. The collar is finely quilted. This brings more comfort and agility to the neck area. The elbows are additionally upholstered. The complete set of the ' Arthur ' series with vests, sleeves and tassets is available in black and brown. "Arthur " is slightly thinner and therefore very comfortable to wear under plate armor. Of course, this fine set of gambeson can also be combined with any chain armor. Material: Cotton canvas, Polyester, suedeSizes: S-XXLColours: black & brown

149,90 €*

Lucas belt shield

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. This belt shield was, just like the entire "Lucas" series, built with a corrugation along the edge. It is worn on the belt, which is pulled through the two leather belt loops on the top. Naturally it can be worn as a small tasset on the thigh. The belt shields are, just like our arm shields, ideal to be painted, modded and combined with existing costume parts. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to üainting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g

11,90 €*

Felix greaves

The "Felix" greaves for small heroes and heroines are made from extremely sturdy leather, very flexible and offer protection against bruises etc. while fighting with padded swords, or when playing in the woods. We recommend to combine them with our padded greaves, to enhance the comfort of wearing. Material: split leatherColours: brown, blackLength: 26cmWidth: 21cm

21,90 €*

Kunden kauften auch

Adolar belt

A simple belt made from split leather with a brass buckle. Use it as a weapon carrier or as a fine detail on your costume.Length: 156cmWidth: 3,5cmMaterial: split leather, brass

19,90 €*

Borchard beltbag Canvas large green

A really nice beltpouch made from heavy-duty canvas. It offers all the space you need outdoors. There are two beltloops on the backside and it is closed with a button/loop in the front. Measurements app.: Length: 19cm Width: 3,5cm Higth: 14cm Width of beltloops: 5cm Material: Canvas

11,90 €*

Recomendación

Bruna water bottle

The water bottle "Bruna" is sewn by hand from sturdy leather. It is an indispensable companion on hikes, battlefields and in dusty dungeons. Inside, it hides an easy-care PET inlay with a capacity of approx. 1.5 litres. The leather strap is removable, so the "Bruna" water bottle can also be attached to other carrying systems or can be placed on a table without a strap. We recommend rinsing the bottle thoroughly with warm water before using it for the first time. Please do not fill your "Bruna" water bottle with hot drinks, as this can damage the PET inlay. We recommend storing your bottle opened, with the plug removed, so it can dry. If you want to use it again, just put the plug in water for a few hours, so it will close tight again.Material: leather, PET Capacity: 1.5 litres Length: 25 cm Width: 8 cm Weight: approx. 400 g This item is a medieval prop that is only produced in small quantities. For this reason, costly food certification is uneconomical or would have a massive impact on the selling price. Therefore, we are obliged to provide the following information: Prop - not certified or suitable for contact with food.

49,90 €*

Zuletzt angesehen

Vysera outer garment green

The "Vysera" outer garment is slotted in the front & back and is closed by rim & buckle on the side. It can be combined with our under dresses, depending on the temperature from light cotton to heavy wool. This dress is an eyecatcher on every event, and also available in a herringbone weaving pattern for a fine detail.Material: CottonSize: S-XXL

49,90 €*

Recomendación

Fletcher Vest

The vest „Fletcher“ from our „7 Seas“- series is fashioned in a typcial Burda-Cut. „Fletcher“ is short and sleeveless, which makes it possible to wear a shirt underneath comfortably. With its buttons from brass, the vest can be worn opened or closed equally. Cuttings at the sides provide agility, furthermore the width of the vest can be adjusted through a strap at the back. The pockets in the front are just implied for decoration. „Fletcher“ is suitable for any Pirate or Seamen character and can be neatly combined with one of our shirts (e. g. „Tilly“). Material: 100% cotton

39,90 €*

Lenora ladies tunic premium canvas brown

The tunic was wide spread within Europe from the antiquity up to the late medieval period. It was worn by men and women in various patterns and in all social classes. Tunics are found in todays T-Shirt and have influenced our culture like no other piece of clothing has. The "Lenora" womens tunic is made from durable canvas fabric and a perfect underdress for many costumes. Whether you wear it underneath a dress, a bodice or a gambeson: it absorbs moisture, but will stay permeable to air. The tunic can also be worn as a costume itself on hot summer days - the ankle long shape covers the body completly but will keep the temperature mild due to its fabric. Combined with a ladies belt from our stock, it is an airy, yet robust, alternative to tighter undergarments. You can easily use this tunic as a nightgown on events - there is little worse getting out of bed at night when the plot asks for it. It also looks great on the way to the lavatory. The cottons hygienic properties are perfectly suited for this use. Our "Lenora" womens tunic is a simple, jet multi purpose functional piece of clothing. Material: premium canvas Sizes: S to XXL

39,90 €*

Solo 3 disponible

Juliana dress herringbone green LIMITED EDITION

Limited edition, only while stocks last.The "Juliana" dress is a classic sideless surcoat dress. This sleeveless overgarment, curiously termed "Höllenfenster" (hell's window) in the olden days, features extremely wide armholes. For that reason, they are worn in combination with an underdress. The elaborate herringbone pattern makes it particularly suitable for noble characters.Material: herringbone (30% polyester, 30% acrylic, 21% wool, 13% cotton, 6% viscose)

29,99 €* 83,90 €* (ahorro del 64.26%)

Solo 2 disponible

Wilhelm armshield large

The large "Wilhelm" arm shield is thought to be and upgrade to our chainmail shirts. Similar to a belt shield, those add ons can show the groups colours, insignia or heraldry. It is being fixed to the wearers upper arm with a belt and can be fastened to the mails rings by using a leather string. Made from armour steel, it is not only an additional armour plate, but also another nice detail on any existing costume. The shield can also be fastened to any other existing armour and clothing - there is no definite need for a chainmail. A gambeson can also be a good foundation: just sew a leather string to the sleeve and attach the shield there! You will only need some creativity and a little handywork. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. We suggest to order a leather string from our stock: this way you have everything at hand, when starting to built your new upgrade. Material: 1,2 mm steel Length: 27 cm Width: 23 cm Weight: app. 0,5 kg Colours: blank, browned

Variantes de 13,90 €*

14,90 €*