The Mina plate shoulders are defined by curved lines and decorative rivets. Two articulated lames are flexibly connected to the shoulder plate by leather straps, allowing freedom of movement in the shoulder area. The shoulders do not overlap with the breastplate and are fastened to the plate collar as well as to the upper arms. The construction allows for combination with a variety of different armour components. The shoulders are compatible with all collars from our range. Material: 1,2 mm steel Length: 27 cm Width: 34 cm Weight (pair): app. 2 kg Colour: blank, browned

The Mina breastplate features a clear, functional design and is decorated with edge flanges and rivets. The shaped cups of the breastplate correspond approximately to size B. It is not intended to be worn directly on the body, but is designed to be worn over a gambeson or a mail shirt. The construction lightly supports the chest from below without fully enclosing it. The breastplate is of a two-piece construction and is connected to a smaller back plate by straps. This allows the size to be adjusted individually.Material: 1.2mm steelColour: blank, browned

The Mina plate shoulders are defined by curved lines and decorative rivets. Two articulated lames are flexibly connected to the shoulder plate by leather straps, allowing freedom of movement in the shoulder area. The shoulders do not overlap with the breastplate and are fastened to the plate collar as well as to the upper arms. The construction allows for combination with a variety of different armour components. The shoulders are compatible with all collars from our range. Material: 1,2 mm steel Length: 27 cm Width: 34 cm Weight (pair): app. 2 kg Colour: blank, browned

The "Hilde" brooch is made of bronze and features a simple, functional design. It is ideal for fastening arm and leg wraps or closing lighter fabrics. Thanks to its understated shape, "Hilde" can be used both as a practical accessory and a decorative element—suitable for a wide range of garments. Material: Bronze Width: approx. 3.2 cm Height: approx. 2.8 cm Pin length: approx. 4 cm All measurements are in centimetres. As our products are handmade, slight variations in size and colour may occur. Colours shown in photographs or on screens may not be accurately represented.

With their curved cut and the simple beads, the "Mina" bracers are designed to match our "Mina" armour set. They are comfortably worn, even on shorter forearms. A generous elbow cutout ensures a lot of freedom of movement. Their long tip on the backside makes them look slim and petite without disturbing in battle. Material: Steel with 1.2 mm thickness Length: 23 cm Width at the front 8.5 cm Width at the back 15 cm

Our "Lena" armour series was especially designed for warrior princesses and shield maidens alike. We distanced from historical patterns and steped closer to a rather fantastic shape. The outcome was a not only a long awaited womens armour, but also a costume set of in the form of a worthy armour set. Be it an Amazone, a warrior princess or an exalted priestess - all of them are possible by combining the armour with the right clothing pieces...Only your imagination limits the possibilities. For all you ladies out there: this is the right armour, not only on LARP events.The "Lena" neck choker is armour and accessory at the same time. It finishes off the "Lena" armour to the top and enlongens the wearers neck. This way the female warrior appears longer and the elfen princess even more raised. The buckle on the backside and a slight, carefull bending allow the chocker to be adjusted even to larger necks by the wearer individually. The chocker is being worn on top of the gorget and does not need any additional attachment. The choker can be worn without any armour as a piece of jewllery; this makes this plate armour piece something special for the women.As always: all edges and points are beaded for additional protection.Material: 1.2mm steelNecks circumference: app. 30cm (+ leather strap)Length: 11cmWeight: app. 200gr