Vladimir bracers
Vladimir bracers
89,90 €
- Más de 25 años de experiencia
- Elija entre más de 5.000 artículos
Información sobre el producto "Vladimir bracers"
The "Vladimir" bracers consist of curved segments and have additional hand and elbow protection. The inner side of the arm is also protected by a flexible segment. The hand protector is flexibly connected to the forearm and thus hardly hinders the wearer in combat.
Material: 1.2 mm steel
Length 42 cm
Weight 2.6 kg
Colour: blank, browned
Los clientes también vieron
The "Vladimir" greaves are made of curved segments decorated with beading and rivets. The knee tile is movable so that it does not restrict mobility in combat. A peculiarity of these leg rails is that they are also closed on the back of the calf. Material: SteelLength: 53 cmWeight 4.8 kgColour: blank, browned
According to its shape the helmet "Francis" is a kind of kettle helmet from the late middle ages. This version has got a very long drawn brim that makes for a specially good face protection but limits the sight of the wearer a lot more than the standard kettle helmets.It has got a cotton covered foam padding on the inside and two leather straps to make it fit tightly to the head.Material: 1mm Steel
The "Vladimir" bracers consist of curved segments and have additional hand and elbow protection. The inner side of the arm is also protected by a flexible segment. The hand protector is flexibly connected to the forearm and thus hardly hinders the wearer in combat. Material: 1.2 mm steelLength 42 cmWeight 2.6 kgColour: blank, browned
A classical "spangenhelmet" with facemask typically for the crusaders´period and an early form of the "great helmet". It has got a cotton covered foam padding on the inside and two leather straps to make it fit tightly to the head.Material: 1,2mm SteelCircumference: 61cm
A simple medium sized bowl with a transparent glazing on the inside. It can be used for soups and stews or cereals or deserts. All our clay products are handmade and therefore each is a little different from the other. Even without glazing they are dishwasher safe, ovenproof and suitable for microwaves. Material: clayDiameter:0,3 l: ~13cm0,5 l: ~15cm This article is a medieval prop that is only produced in small quantities. For this reason, expensive food certification is uneconomical or would have a massive impact on the selling price.Therefore we are obligated to the following notice: Prop - not certified or suitable for contact with food.
Clientes que también compraron
The "Vladimir" greaves are made of curved segments decorated with beading and rivets. The knee tile is movable so that it does not restrict mobility in combat. A peculiarity of these leg rails is that they are also closed on the back of the calf. Material: SteelLength: 53 cmWeight 4.8 kgColour: blank, browned
The cup, matching our sustainable bamboo cutlery. Lightweight, environmentally friendly, and absolutely suitable for any ambiance. Manufactured in a small workshop in Vietnam, the manufacturer refrains from using chemicals and exclusively employs non-toxic protective coatings. The bamboo is boiled, dried, and then processed before production. The cutlery is not suitable for use in a microwave or dishwasher. Material: Bamboo Height: 12 cm Diameter: 6.5 cm Capacity: approx. 250 ml Weight: approx. 130 g This item is produced in limited quantities. Therefore, a costly food regulatory certification is uneconomical or would significantly impact the selling price. Therefore, we are obligated to provide the following note: Prop - not certified or suitable for contact with food.
Same as the "Vladimir" torso armour the spaulders are made out of several flexible segments. This allows the wearer to lift and turn his arms to the greatest possible extent.Their broad shape accentuates the impressive appearance of the whole suit of armour.Top edge width: 40 cm Bottom edge width: 57 cm Top segment height: 17.5 cm Lateral height without blade breaker: 15.5 cm Frontal height without blade breaker: 37.5 cm Blade breaker height: 5 cm Arm strap circumference: 53 - 61 cm Material: 1,2mm steelColour: blank, browned
The "Balthasar" gorget is a very stylish piece of armour. Elegant lines and decorative rivets along its edges, make it stand out of the mass.This gorget can also be combined with all other Mytholon spaulders. To make them look their best we recommend combining them with other "Balthasar" armour parts.There are two different "Balthasar" gorgets. We recommend the smaller size for the leaner necks of ladies and adolescents. We recommend the larger size for gentlemen.Small: Length front part: 23cmTotal width: 29cmLarge:Length front part: 29cmTotal width: 36cm Material: 1,2mm SteelColours: blank, brownedYou can find all our "Balthasar" series products here.Maybe take a look at our Padded Jackets to wear them underneath your Armour. This maximizes the comfort wearing it.