Adam guard set
We offer you the "Adam" guard set, consisting of bracers & greaves for a discounted set price. Material: 1.2mm steel
Balthasar guard set
We offer the "Balthasar" bracers & greaves for a discounted set price. Material: 1.2mm steel Size greavesLength: 35 cm Width: 23 cm Weight (Pair): ca. 1,5 kg Size bracers Length : 23cm Width top: 18cm Width bottom: 14cm Weight (Pair): ca. 1,0 kg
Balthasar set
Our "Balthasar" armour series does not only look great and worthy, but also allows a free movement when fighting. The spaulders and the torso are made from lots of movable parts. This is why the "Balthasar" series offers the movability, you would normally find only with custom built armour. The full arm guards are quickly attahed to the spaulders and are made from six seperate pieces (riveted to each other) providing lots of movement. The typical series' rolling shapes are found in the full leg guard as well. They are attached to the wearer by using the two upper leather straps on the hip belt. Just like all pieces from the armour series, the armour parts are decorated with the typical round head rivets. The greaves are worn seperatly and are not attached to the full leg guards. This enhances the comfort wearing them. This set is a high quality basis for any knights or warriors costume. It combines a premium entrance to any battlefield with movability, efficiency and comfort. We suggest to wear a padded gambeson underneath all metal armours, as it will increase the comfort and avoid bruises and scratches. This armour can be upgraded with a chainmail to recieve a heavy armour appearance. This set contains: - the "Balthasar" greaves- the "Balthasar" spaulders large- the "Balthasar" full arm guard- the "Balthasar" full leg guard- the "Balthasar" torso armour Material: 1,2mm steel Measurements of the torso armour: Chest circumference: app. 115cm to app. 130cm Length: 72cm Weight of the chest plate: app. 4,2kg Weight of the back plate: app. 4,4kg Measurements of the spaulders: Length: 27cm Width: 49cm Weight (pair): app. 3,4kg Measurements of the full arm guard: Length: 50cm Circumference (wrist): 25cm Width on the shoulder strapping: 25cm Weight (pair): app. 3,8kg Measurements of the full leg guard: Length: 57cm Width of the calf segment: 26cm Width of the thigh segment: 34cm Weight (pair): app. 4,7kg
Fafnir brigandine set
Our "Fafnir" body armour is something really special. Metal plates have been riveted on a backing of padded suede. Especially the comfort of the wearer and the feasibility of putting on a complete suit of armour in a few minutes were our goals. Because of this there is no need to wear a gambeson or a similar garment. You have the choice between three different adjustments which you can make yourselves. The different parts of the armour are connected by leather straps. The three different sizes are achieved by pulling these straps through eyelets. Additionally, you can omit some parts of the armour, eg. the shoulder parts or the thigh protectors. The complete set of our "Fafnir" line of products, consisting of: Fafnir bracersFafnir greaves Fafnir brigandine Material: Steel, suede, leather, cottoncanvas
Galahad Paladin armour set
The plate armor came to Western Europe at the end of the 14th century and was used until the 17th century. It has been continuously developed and adapted to the respective needs of its carriers. So it is not surprising that there were a lot of variants of this armour.The "Galahad" plate armour is a three-quarter harness in fantastic design. Striking are the massive shoulders with the big blade crushers. With their large floating discs, they give the armor its impressive, powerful character. The torso is segmented and flexible. It is adjustable in size and passes into a armourbelt. Attached to this belt are the curved tassets. Between them sits a belt shield."Galahad" is ideal for heavily equipped roles such as knights or paladins. The armour can be supplemented by arm and leg guards as well as with a chainmail. Material: SteelThickness: 1.2 mmColor: Shiny
Georg armour set large
Our popular Georg Armour is now also available as an affordable set! This comprehensive set includes a cuirass, spaulders, a collar, tassets, greaves, and bracers. The Georg Armour is known for its high mobility, making it particularly ideal for warriors who seek to combine protection and agility. Material: 1.2 mm steel Cuirass: Length: 41 cm, Width: 41 cm, Circumference: approximately 130 cm, Weight: 3.5 kg Spaulders: Length: 30 cm, Width: 54 cm, Weight (each): 1.9 kg Collar: Length (front part): 32 cm, Length (back part): 24 cm, Width: 27.5 cm, Weight: 1 kg Tassets: Length: 25 cm, Width: 26 cm, Weight: 1.2 kg Greaves: Length: 35 cm, Width: 25 cm Bracers: Length: 26 cm, Width: 21 cm/17 cm
Georg armour set small
The complete torso of our popular Georg Armour is now available as an affordable set! This set includes a cuirass, collar, and tassets. The Georg Armour is known for its high mobility, making it particularly ideal for warriors who seek to combine protection and agility. Material: 1.2 mm steel Cuirass: Length: 41 cm, Width: 41 cm, Circumference: approximately 130 cm, Weight: 3.5 kg Collar: Length (front part): 32 cm, Length (back part): 24 cm, Width: 27.5 cm, Weight: 1 kg Tassets: Length: 25 cm, Width: 26 cm, Weight: 1.2 kg
Gustav Großes Set
A complete set of plate armour based on the historical style. The "Gustav" series combines a plain design and a great deal of functionality with a particularly good price-performance-ratio. The armour parts are ideally suited for history festivals and medieval fairs or for character concepts the equipment of which is settled in "low fantasy". This set contains: - Gustav chestplate - Gustav spaulders - Gustav collar - Gustav arm guard - Gustav leg guard
Gustav small set
This set is ideal for all soldiers, mercenaries, and campaigners. Paired with a chainmail shirt, the lightweight plate combination can easily be turned into heavy armour, if necessary. This set contains: - Gustav breastplate - Gustav spaulders - Gustav collar
Kaspar armour set
Looking for a complete set of armour in very distinctive style? This is, where you'll find just the right thing: This complete set from our "Kaspar" series offers you all the armour parts gathered in one cut-rate set. You will receive the torso armour (front- and back plate), the matching tassets, the helmet, the gorget and a pair of spaulders. This way you will receive a complete armour set in the style of the mid 16th to the mid 17th century german horse riders. Material: 1.2mm steel Torso Waist Circumference 108 - 120 Chest Circumference 125 - 140 Shoulder to Waist Length 60 Tassets Width 25 Length 34 Gorget Width bottom front 12 Width bottom back 13 Width bottom on shoulder 10.5 Width top 4 Neck circumference 47 Spaulders Length 34.5 Width top 35 Width bottom 17.5 Circumference at widest hole 46 Circumference at narrowest hole 28 Helmet Head circumference (inside helmet) 59.5 - approx. 63 Length in the neck 10 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.
Katharina armor belt and tassets set
For optimal mobility of the Katharina armour and a good fit, we have separated the upper and lower parts of the torso armour. The Katharina armour belt forms the lower part of the torso and is worn beneath the breastplate. It is secured with a broad leather strap at the back, allowing for individual adjustment of size by both the strap and careful bending. The four front straps of the belt are used to attach the tassets, allowing for optimal adjustment of their height and angle. They continue the distinctive curved design characteristic of this armour, providing a visually cohesive finishing touch. All components of this armour are flanged to ensure safety for you and your fellow players. To prevent rust, the inner parts have been painted. However, this paint may peel over time. We recommend regular maintenance with oil, such as the Ballistol available from us. Material: Steel This set includes the armour belt and a pair of tassets . Measurements of the armor belt: Width center front: 22,5 cm Width side: 9,5 cm Length metal: 66 cm Entire length: 83 cm - 115 cm Measurements of the tassets: Length: 29 cm Width top: 18 cm
Katharina armour set
Our Katharina armour has been specially designed for female warriors who value functionality and agility. It is a relatively lightweight plate armour, ideal for fast-paced battles and skirmishes. The contoured breastplate is divided into three movable segments, just like the backplate. This allows the torso to perfectly conform to the body shape. The height of the backplate can be adjusted using the shoulder straps. To prevent the Katharina armour from pressing on the hips, we have kept the upper torso shorter and widened the belt accordingly. Worn beneath the torso, the belt forms a fully flexible lower-body armour. The large tassets effectively protect the thighs. We have paid special attention to the combination of spaulder and arm guard. These components form a modular system in the Katharina set. You can wear the segmented spaulders individually as a lightweight shoulder armour, or you can expand it with an upper arm segment. You can adjust the distance between the shoulder segment and the upper arm segment to your liking. This segment also serves to attach the contoured elbow tile, with the distance being individually adjustable as well. This customization provides you with an arm guard that can be precisely tailored to your arm, almost like a custom fit. The bracers and leg greaves have a classic round shape and do not snag on other armour pieces. They, along with the tassets, are adorned with a curved decorative segment. With the Katharina armour set, you can implement a variety of concepts, from lightly to heavily armored. The finish is polished, making it the first of our armors that you can proudly wear with this unique shine onto the battlefield. All components of this armour are naturally flanged to ensure safety for you and your fellow participants. The inner parts have been painted to protect against rust, although this paint may peel over time. We recommend regular maintenance with oil, such as the Ballistol available from us. Material: Steel, Leather Measurements Torso: Length: 50 cm Neckline opening: 21 cm Measurements Armor Belt: Width center front: 22,5 cm Width side: 9,5 cm Length metal: 66 cm Entire length: 83 cm - 115 cm Measurement Tassets: Length: 29 cm Width top: 18 cm Measurements Arm Guard: Length top shoulder plate: 19cm Width top shoulder plate: 31 cm Length entire spaulder: 40 cm to 26 cm (adjustable) Measurements Bracers: Length Side: 17,5 cm Length center front: 22 cm Width at wrist 11,5 cm Measurements Greaves: Length Side: 26 cm Length center front: 33,5 cm Width at ankle: 12 cm
Katharina bracers and greaves set
The bracers and greaves of the Katharina armour are crafted in a classic, rounded style. They are adorned with the characteristic curved elements, which are also found on the tassets of Katharina. All components of this armour are naturally flanged to ensure safety for you and your fellow players. The inner parts have been painted to protect against rust, although this paint may peel over time. We recommend regular maintenance with oil, such as the Ballistol available from us. Material: Steel This set includes one pair of arm guards and one pair of leg guards. Measurements Bracers: Length Side: 17,5 cm Length center front: 22 cm Width at wrist: 11,5 cm Measurements Greaves: Length Side: 26 cm Length center front: 33,5 cm Width at ankle: 12 cm
Katharina Torso
The torso of the Katharina armour has been meticulously designed for agility and comfort, featuring an intricately shaped, three-part breastplate and an equally flexible backplate. Its short cut allows for comfortable torso movement without exerting pressure on the hips. The backplate seamlessly conforms to your body shape, covering the lower back and securing with two leather straps on each side. Broad shoulder straps connect the two elements, providing adjustable height. Along with the movable side panels of the breastplate, the torso can be individually adjusted to your size. The modular arm guard with the spaulders is attached to the torso with shoulder buckles. Wear the armour belt with leg pockets freely underneath. Thus, the torso forms the core element of the Katharina armour. Wear it alone as a lightweight cuirass or as part of the complete set, adapting to your preferences and style. All components of this armour are naturally flanged to ensure safety for you and your fellow participants. The inner parts have been painted to protect against rust, although this paint may peel over time. We recommend regular maintenance with oil, such as the Ballistol available from us. Material: Steel, Leather Length: 50 cm Neckline opening: 21 cm
Lambert Armour Set
Our "Lambert" armor is kept simple and functional. It can be adapted to the wearer using straps and buckles. This increases the comfort and mobility considerably. We recommend wearing a gambeson and arm and leg pads under the armor in order to further improve wearing comfort and to avoid bruises and chafing.Material: steel, leatherTorso Dimensions:Width: 37 cmLength: 35 cmWeight: approx. 3.5 kgTassets dimensions:Width: 26 cmLength: 28 cmWeight (pair): approx. 2.1 kgBracers Dimensions:Width 18 cmLength: 25 cmWeight: approx. 0.5 kgGreaves Dimensions:Width: 14 cmLength: 43 cmWeight: about 1 kgGorget Dimensions:Width: 40 cmWeight: about 1 kgSpaulders Dimensions:Width: 16.5 cmLength: 35 cmWeight: about 1.3 kgArmour Belt Dimensions:Width: 40 cmLength: 22 cmWeight: about 1.2 kgBelt Shield Dimensions:Width: 17.5 cmLength 24 cmWeight: approx. 350 g
Lena set
Our "Lena" armour series was designed for female warriors and is very special indeed. We deliberately turned away from historical patterns and towards fantastic designs. The outcome was not only a long desired female plate armour, but a fantastic outfit set in form of an armour. Whether for scantily clad amazone princesses, female elven soldiers or venerable warrior priestesses - it is all about the combination with other outfit pieces... Only your imagination will set the limits! For all those ladies that like to cause a stir, this armour is just the right thing - not only on LARP events. We offer this exciting armour suit in a low-priced set. The breastplate in size "S/M", is suggested for cup sizes up to B, size "L/XL", is suggested for cup sizes up to D. Material: Steel The set includes: 1x Lena armour belt 1x Lena shoulders 1x Lena neck corset 1x Lena collar 1x Lena breastplate S-M/L-XL
Lucas armour set
The "Lucas" armour series was especially designed for kids. The bracers and greaves are a little shorter, so that they fit smaller arms and legs. The chest plate is made for smaller bodys, but can be enlarged by carefully bending it with the wearers growth. The chest plate is a historical copy and has no back plate. it is closed on the wearers back by closing two leather straps on the buckles on the sides. Steel bracers and greaves are not only suitable for in-game protection when blocking blows to the arms and legs, but also protect in real life: whenever the kids roam through the forrests and parks, their legs and arms may get scratches and bruises. Shins and lower arms are well protected with a layer of steel greaves and bracers. We offer a complete armour for the younger heroes with an unbeatable price with this set. May it be a black knight or a wild burglar - black is the basis for many protected heroes. We suggest to wear a set of padded bracers and greaves to worn underneath any steel armour, as it will prevent bruising and cutting of the skin underneath and maximuses the comfort wearing steel armour - be careful and protect yourself at all times. Measurements of the armour: Lucas Torso: Width: 33cm Heigth: 40cm Circumference (widest point): 50cm Lucas bracers: Length: 20cm Width (top): 15cm Width (bottom): 12cm Lucas greaves: Length: 25cm Width (top): 20cm Width (bottom): 15cm Weight of the armour: Lucas chest plate: 1,6kg Lucas bracers: 0,7kg Lucas greaves: 1,1kg This set contains: Lucas chest plate Lucas bracers Lucas greaves
Lucas guard set
Steel bracers and greaves are not only suitable for in-game protection when blocking blows to the arms and legs, but also protect in real life: whenever the kids roam through the forrests and parks, their legs and arms may get scratches and bruises. Shins and lower arms are well protected with a layer of steel greaves and bracers. A great basis for "dark" characters, but they are also suitable as a contrast for brighter costumes. The "Lucas" set of bracers and greaves was specially designed for children and adults with a really small circumference on arms and legs. They are shorter and smaller in diameter, but can "grow" with the wearer by carefully bending them open a little. Just like all pieces from the "Lucas" range, they are built with a stiffening ridge along the edges and are being closed with two straps on each piece. We suggest to wear padded bracers and greaves underneath to avoid scratches and bruises when playing outside. Not only does this maximise comfort, but also protects the skin and bones. Measurements: Lucas bracers: Length: 20cm Width (top): 15cm Width (bottom): 12cm Weight: app. 0,7kg Lucas greaves: Length: 25cm Width (top): 20cm Width (bottom): 15cm Weight: app: 1,1kg This set contains the bracers and the greaves from the "Lucas" series.
Markward guard set
Steel bracers and greaves not only protect your depicted character from the attacks of your enemies, they also protect you quite real when recreational heroines and heroes on castles and forests experience their adventures. Underbrush and stones can quickly cause bruises during outdoor activities. With this set, shins and forearms are protected against it. We offer you here the ' Markward ' set consisting of the bracers and the greaves in blank. With its slender lines and the simple design it fits well with all armour wearing costume ideas. Material: Steel Dimensions of Bracers: Length: 25 cm Width: 20 cm top, 14 cm bottom Weight. 900 g Dimensions of the greaves: Length 25 cm Width 20 cm top, 14 cm bottom Weight: 1.8 kgs We always recommend to wear pads under plate armour. This increases the wearing comfort and the protective effect enormously.
Markward Set
The complete "Markward" set in blank at a special price. Consisting of: - Bracers - Greaves - Gorget - Torso - Pauldrons - Tassets Material: SteelTorso: HPS Length: 37 cm Chest circ.: 118 cm Waist circ.: 116 cm Shoulder width: 27 cmGreaves: Length: 37 cm Width (taken on upper belt height): 26 cm Note: The sword shown, the Markward belt shield, and the undergarments depicted are not included in the scope of delivery.
Mina set
"Mina" was made as an armour for women. Naturally we had to resign from historical patterns, as equality was not that popular amongst the medieval knight. Today we are proud to announce, that there is a way to dress strong women for the battlefield - using this armour set, you will not only be good looking on the field of glory, ladies! The "Mina" armour resebles large parts of our well known "Balthasar" series. The edges with decorative rivets are a continuous detail. Both series can be combined to get a resembeling look. We offer the armour series in a set for a lowered price. The slick pattern with lots of waves and cuts, just as the high movability and comfort when wearing it combine the attractive design with functionality. This set includes: Chestplate, Gorget, Spaulders, Armour Belt Material: 1.2 mm steel Measurements of this armour set: Chest Plate: Circumference: min. 69 cm, max. 89 cm Length: 19 cm Width: 44 cm Weight: app. 1040 g Plate Gorget: Circumference (neck): 44 cm Length: 37 cm Width: 25,5 cm Weight: app. 800 g Spaulders: Length: 27 cm Width: 34 cm Weight (pair): app. 2 kg Armour Belt: Circumference: min. 85 cm, max. 98 cm Width: 18 cm Weight: app. 1250 g
Ortwin Armor Antique
This armor set consists of a chest plate, a back plate, a plate collar, spaulders, arm guards and tassets. The torso is closed at the sides with straps, so that the width can be comfortably adjusted. The generous cutouts on the arms allow one high flexibility, while a flexible two-segment abdominal tire supports the wearer's lower torso protects. The rivets emphasize the forms of the armor and are a nice detail. The included collar comes with straps on the shoulders and two leather straps attached in the chest area. On the belly ring there are two straps on which the leg pockets can be attached. The shoulder plates are also attached to the breastplate with straps. Material: steel, leather Torso:Length of the torso armor: 48 cmChest width: 62 cm Collar:Length of the collar: 16 cmWidth of the collar: 34 cm Shoulder:Length: 34 cmShoulder circumference: 44 cm Arms:Length: 50 cmCircumference: 45 cm Tasset:Length: 28 cmWidth: 27 cm
Rikomer Armour burnished medium Discontinued
The plate mail "Rikomer" is the brother of our "Dragomir" armour. Elaborately crafted, it consists of a multitude of elements, which in combination result in an extraordinary armour that could hardly be any more agile. Every part of Rikomer is carefully flanged and matched to each other. Unlike "Dragomir" this armour is not decorated with beads and thus gets an uncompromising, brutal design, which stands in contrast to the finely formed parts. "Rikomer"'s design and masterful workmanship make this armour so unique. It is also a bit lower-priced than its brother "Dragomir". Armour suits like this are normally only available as custom-made pieces, and we had to fiddle with it for a long time before we could bring it to serial production. Of course, the fit can (and will have to) be optimized here and there by carefully bending the pieces, but we have designed the armour so that it can be worn to battle with maximum wearing comfort. The medium size has a smaller troso and armour belt. All pieces are burnished for protection from rust, whick makes Rikomer a great match for dark knights and champions of chaos. We generally recommend wearing a gambeson & padded bracers & greaves underneath plate armour; wearing comfort and protective effect are significantly improved. Material: steel, leatherTorso measurements:Chest circumference: approx. 120cm to approx. 142cmLength: 64cmNeckline: 20cm
Rikomer armour set blank large Discontinued
Discontinued, only while stock lasts The plate mail "Rikomer" is the brother of our "Dragomir" armour. Elaborately crafted, it consists of a multitude of elements, which in combination result in an extraordinary armour that could hardly be any more agile.Every part of Rikomer is carefully flanged and matched to each other. Unlike "Dragomir" this armour is not decorated with beads and thus gets an uncompromising, brutal design, which stands in contrast to the finely formed parts."Rikomer"'s design and masterful workmanship make this armour so unique. It is also a bit lower-priced than its brother "Dragomir".Armour suits like this are normally only available as custom-made pieces, and we had to fiddle with it for a long time before we could bring it to serial production. Of course, the fit can (and will have to) be optimized here and there by carefully bending the pieces, but we have designed the armour so that it can be worn to battle with maximum wearing comfort. The medium size has a smaller torso and armour belt. All pieces are polished, making Rikomer ideal for noble knights and warriors of the light.We generally recommend wearing a gambeson & padded bracers & greaves underneath plate armour; wearing comfort and protective effect are significantly improved.Material: steel, leatherTorso measurements:Chest circumference: approx. 120cm to approx. 142cmLength: 64cmNeckline: 20cm
Rikomer armour set blank medium Discontinued
The plate mail "Rikomer" is the brother of our "Dragomir" armour. Elaborately crafted, it consists of a multitude of elements, which in combination result in an extraordinary armour that could hardly be any more agile. Every part of Rikomer is carefully flanged and matched to each other. Unlike "Dragomir" this armour is not decorated with beads and thus gets an uncompromising, brutal design, which stands in contrast to the finely formed parts."Rikomer"'s design and masterful workmanship make this armour so unique. It is also a bit lower-priced than its brother "Dragomir".Armour suits like this are normally only available as custom-made pieces, and we had to fiddle with it for a long time before we could bring it to serial production. Of course, the fit can (and will have to) be optimized here and there by carefully bending the pieces, but we have designed the armour so that it can be worn to battle with maximum wearing comfort. The medium size has a smaller torso and armour belt. All pieces are polished, making Rikomer ideal for noble knights and warriors of the light.We generally recommend wearing a gambeson & padded bracers & greaves underneath plate armour; wearing comfort and protective effect are significantly improved.Material: steel, leatherTorso measurements:Chest circumference: approx. 120cm to approx. 142cmLength: 64cmNeckline: 20cm
Rikomer armour set burnished large Discontinued
Discontinued, only while stock lasts The plate mail "Rikomer" is the brother of our "Dragomir" armour. Elaborately crafted, it consists of a multitude of elements, which in combination result in an extraordinary armour that could hardly be any more agile.Every part of Rikomer is carefully flanged and matched to each other. Unlike "Dragomir" this armour is not decorated with beads and thus gets an uncompromising, brutal design, which stands in contrast to the finely formed parts."Rikomer"'s design and masterful workmanship make this armour so unique. It is also a bit lower-priced than its brother "Dragomir".Armour suits like this are normally only available as custom-made pieces, and we had to fiddle with it for a long time before we could bring it to serial production. Of course, the fit can (and will have to) be optimized here and there by carefully bending the pieces, but we have designed the armour so that it can be worn to battle with maximum wearing comfort. The medium size has a smaller troso and armour belt. All pieces are burnished for protection from rust, whick makes Rikomer a great match for dark knights and champions of chaos.We generally recommend wearing a gambeson & padded bracers & greaves underneath plate armour; wearing comfort and protective effect are significantly improved.Material: steel, leatherTorso measurements:Chest circumference: approx. 120cm to approx. 142cmLength: 64cmNeckline: 20cm
Vigor armour set
Our "Vigor" armour was designed for the more imposing characters on the battlefield – referring not only to their formidable fighting style. This armour set’s generous dimensions make it comfortable for longer periods of time even for powerfully built warriors of both genders. However, a small tweak in design also allows adjusting "Vigor" to slender people. To do so, you simply have to remove the central tasset from the armour belt and, if necessary, shorten the belt. In so doing, you can improve the fit for wearers with slimmer hips. The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of tabletop miniatures. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn, but well-cared-for character. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand, it is unique for every single armour. However, if you’d prefer your armour unburnished, you can also easily remove the burnishing layer using a soft abrasive fabric. At the heart of "Vigor" is the broad torso armour, which the large bevor can be attached to using buckles. The torso armour consists of flexibly connected chest and back plates. The lower parts protecting the chest and back consist of moving plates. Two straps on either side are used to close the torso armour and adjust the fit. The bevor contributes a lot to the armour set’s brute look, and it is easy to adorn with wax seals or to blazon it with your coat of arms. It consists of two interlaced moving segments; the interior front segment slants way down and rests against the torso, ensuring that neither your vision nor your breathing are impaired. The outer neck segment rests on the spaulders and is broad enough to offer full mobility for your head. The mighty spaulders consist of seven segments and also feature segmented upper arm protection. All the parts are connected flexibly and allow a maximum in freedom of movement. The armour belt is long enough even for broader hips and features three tassets. These are suspended from the belt from loops so that their position can be adjusted individually. In order to reduce the armour belt’s size, you can remove the central tasset and thus shorten the belt’s circumference. The vambraces are rather slender in comparison to the rest of the armour parts. For that reason, they will not hinder you when carrying a shield. They consist of three slightly curved segments and feature a comfortable cutout for your hand as well as slightly bent edges around the wrist, which significantly increase wearing comfort. The greaves are long enough to also protect the wearer’s knees. The upper part is mounted to be movable, making movements such as kneeling easier. The sweeping knee protection is another very special design element of this armour set. Broad cutouts for your feet as well as bent edges increase wearing comfort. It goes without saying that all edges of these armour pieces are beaded. Material: steel, leather Measurements of the armour parts: Torso: Chest width: 67cm Length (shoulders to lower segment): 55cm Width neck cutout: 18cm Weight: approx. 5.3kg Bevor: Front segment height: 20.5cm Neck segment height: 18cm Side height: 8cm Length (front to neck) 37cm Width (inner) front segment: 23cm Width (outer) neck segment: 28.5cm Weight: 1.6kg Armour belt: Length: approx. 160cm Width approx. 2.8cm Side tassets: Width (top): 47cm Width (bottom): 24cm Length: 36cm Weight (each): approx. 1.8kg Central tasset: Width (top): 36cm Width (bottom): 13cm Length: 34.5cm Weight: approx. 1.3kg Vambraces: Length: 34cm Circumference (upper strap): 24cm Circumference (lower strap): 13cm Weight (pair): approx. 1.5kg Greaves: Length: 52cm Circumference (upper strap): 26cm Circumference (lower strap): 20cm Weight (pair): approx. 4kg The parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight. Adjustments to several of the measurements are possible by carefully bending the respective armour parts.
Vladimir large set
The complete set from our Vladimir armour line. An impressive full suit of armour that is characterised by its special mobility. All parts consist of many individual pieces that can be interlocked, giving the wearer a great deal of flexibility. The large shoulders with blade breakers and the scale-like design give every warrior a strikingly imposing appearance. Consisting of: - Vladimir torso - Vladimir spaulders - Vladimir armour belt - Vladimir bracers - Vladimir greaves Measurements of the Vladimir parts: Torso Consisting of chest and back. Total chest circumference: 115,5 - 145,5 cm Chest armour Total length: 53 cm without shoulder straps Width of waist strap: 59 cm plus 15 cm straps on each side Chest width: 32 cm Back armour Total length: 62 cm without shoulder strap Belly width: 56.5 cm Width at the upper back: 31.5 cm Spaulders Width top edge: 31 cm Width centre: 50 cm Width bottom edge: 55 cm Arm strap circumference: 53 - 61 cm Bracers Total length: 41 cm Length of arm element: 31 cm Length of hand element: 9 cm Circumference of upper strap: 27 - 35 cm Wrist strap circumference: 21.5 - 26.5 cm Greaves Total length: 53 cm Circumference, upper strap: 33 - 47 cm Circumference, lower strap: 25 - 42 cm Armour belt Total length of belt strap: 146 cm Belt strap width: 4 cm Length of armour pockets: 34 cm Width of upper edge of armour pockets: 38 cm Width of lower edge of armour pockets: 27.5 cm
Vladimir small set
The small set from our Vladimir armour line. An impressive full suit of armour that is characterised by its special mobility. All parts consist of many individual pieces that can be interlocked, giving the wearer a great deal of flexibility. The large shoulders with blade breakers and the scale-like design give every warrior a strikingly imposing appearance. Consisting of: - Vladimir torso - Vladimir spaulders - Vladimir armour belt Measurements of the Vladimir parts: Torso Consisting of chest and back. Total chest circumference: 115,5 - 145,5 cm Chest armour Total length: 53 cm without shoulder straps Width of waist strap: 59 cm plus 15 cm straps on each side Chest width: 32 cm Back armour Total length: 62 cm without shoulder strap Belly width: 56.5 cm Width at the upper back: 31.5 cm Spaulders Width top edge: 31 cm Width centre: 50 cm Width bottom edge: 55 cm Arm strap circumference: 53 - 61 cm Armour belt Total length of belt strap: 146 cm Belt strap width: 4 cm Length of armour pockets: 34 cm Width of upper edge of armour pockets: 38 cm Width of lower edge of armour pockets: 27.5 cm