Adam Greaves
Our "Adam" greaves are pieces of light leg rmour that are also well-suited for the younger generation. They feature the ornamental border typical for the "Adam" series. For an average adult, these greaves will approximately reach down to the middle of the calf. Material: Steel Measurements: 30cm length, 22cm on top, 15cm on the bottom The price refers to one pair.
Adam guard set
We offer you the "Adam" guard set, consisting of bracers & greaves for a discounted set price. Material: 1.2mm steel
Balthasar full legguard
The "Balthasar" leg guards are made of six segments. Their knee joints are very agile and hardly hinder running or fighting. Like all the armor parts of the "Balthasar series", the leg guards are intricately designed and decorated with beadings and rivets. The lower leg segment is kept short, so additional tassets can be worn. This increases the agility and gives the armor an extra detail. For knights, paladins and other heavy armored charactres, the "Balthasar" leg guard is an ideal complement. Material: 1,2mm steel Colours: blank, browned Length: 57 cm Weight: 4.7 kg
Balthasar greaves
As with all other products from the "Balthasar" line, these greaves have a rim decorated with rivets. The combination of a rounded outline and decorative elements make them look both noble and warlike. Material: 1,2mm Steel Length: 35 cm Width: 23 cm Weight (Pair): ca. 1,5 kg
Balthasar guard set
We offer the "Balthasar" bracers & greaves for a discounted set price. Material: 1.2mm steel Size greavesLength: 35 cm Width: 23 cm Weight (Pair): ca. 1,5 kg Size bracers Length : 23cm Width top: 18cm Width bottom: 14cm Weight (Pair): ca. 1,0 kg
Elias full legguard blank Discontinued
Discontinued, only while stocks last These full leg plate armours from our "Elias" series are blank and protect your legs from ankle to the upper thigh. The knees have a joint and therefore do not interfere with movement.Material: 1.2mm steelColour: blankAll other \\"Elias\\" series\\' articles are listed here.Sold in pairs.
Fafnir padded greaves
The "Fafnir" greaves consist of three solid riveted segments. A lower foot protection, which, thanks to the generous, padding, allows the greaves to be comfortably worn down to the boots, an extra padded segment for the knees and the actual protection for the shin. With their curved lines and wide beading, the greaves look sleek and elegant, with maximum protection. Due to the overlapping segments, they are very stable and do not deform even in the case of heavy duty. Like all the armour of the "Fafnir" series, these greves are equipped with padded suede upholstery. This increases the wearing comfort considerably and also protects knees and feet. They are closed with sturdy leather straps and roll buckles on the back. Armours of the "Fafnir" series are not only for characters with "Nordic" background a decent protection. Adventurers, knights, soldiers and many other armour wearers also benefit from their good protective effect and maximum wearing comfort. Material: 1,2 mm steel, suede, polyester Length 53 cm Weight 2.7 kg
Georg greaves
A pair of nicely detailled greaves with beaded edge and lots of rivets along the ridge. The matching greaves from the Georg series are best worn with the bracers from the same series. They are being closed with a pair of strap-buckles on nthe backside of the calf. Material: 1.2mm steel Measurements: Length: 35cm; Width: 25cm/25cm
Gustav full legguard
All our products from the "Gustav" series combine simple design and functionality at a great price performance ratio. This series of low cost plate armour gives you the opportunity to arm yourself without spending lots of money. Its design suits many different character concepts and therefore you will be able to use it over and over again for many years. It is also great for medieval fairs and historic events. The plate chausses are attached to a waist belt by a strap on the outside. Three further buckle straps are used to fix them to the wearers´s legs. The length of the beltstrap can be varied to adjust the size of the chausses according to the length of the respective leg. Material: 1.2 mm steel
Gustav greaves
The "Gustav" greaves are a real specialty. The characteristic cut is simple jet has a useful contra curve at the bottom, that gives some extra space for moving your ankles.A very effective and comfortable pair of greaves.Material: 1.2mm steelColour: blank, browned
Harald greaves
A pair of simple greaves with a central bending.Looking quite like the "Georg" series' greaves, we left the rivets and additional beading along the ridge be and offer a central bending instead. This allows the material to be less fexible and being more stiff along the longside.They are being closed around the calf by two buckle-straps.Material: 1.2mm steelLength: 35cm Width: 25cm/22cm
Jost greaves
The characteristic cut is simple jet has a useful contra curve at the bottom, that gives some extra space for moving your ankles.A very effective and comfortable pair of greaves from our "Jost" series.Material: 1.2mm steelColour: blank, browned
Katharina Greaves
The Katharina greaves feature a classic cut adorned with a graceful curved element, echoing the design found on the bracers and tassets of the Katharina armour. They are secured with two sturdy straps, allowing for adjustable sizing. All components of this armour are naturally flanged to ensure safety for you and your fellow participants. The inner parts have been painted to protect against rust, although this paint may peel over time. We recommend regular maintenance with oil, such as the Ballistol available from us. Material: Steel Length Side: 26 cmLength center front: 33,5 cmWidth at ankle: 12 cm
Lambert greaves
The greaves of our “Lambert” series are ornamented with a beading that curves upwards. Their broad cutouts for the wearer’s feet allow comfortably wearing them even on long marches. Like the entire “Lambert” armour series, the greaves have a curved design and stand out through both their functionality as well as their elegant shape. We recommend wearing additional leg padding or putees to increase wearing comfort and avoid bruises and abrasions. Material: steel, leather Width: 14cm Length: 43cm Weight: approx. 1kg
Lucas greaves
The products from our "Lucas" series are specially designed for the young heroes. They look like the ones for adults but are cut a lot smaller. Additionally we put a lot of emphasis on flexible sizes so that they can "grow" a little bit with the young wearers. The greaves are designed similar to our greaves "Adam" but are cut smaller. They are closed with two buckle straps on the back. To make them fit to the wearer´s legs you can also carefully bend them a little bit. Material: Steel 1mm
Lucas guard set
Steel bracers and greaves are not only suitable for in-game protection when blocking blows to the arms and legs, but also protect in real life: whenever the kids roam through the forrests and parks, their legs and arms may get scratches and bruises. Shins and lower arms are well protected with a layer of steel greaves and bracers. A great basis for "dark" characters, but they are also suitable as a contrast for brighter costumes. The "Lucas" set of bracers and greaves was specially designed for children and adults with a really small circumference on arms and legs. They are shorter and smaller in diameter, but can "grow" with the wearer by carefully bending them open a little. Just like all pieces from the "Lucas" range, they are built with a stiffening ridge along the edges and are being closed with two straps on each piece. We suggest to wear padded bracers and greaves underneath to avoid scratches and bruises when playing outside. Not only does this maximise comfort, but also protects the skin and bones. Measurements: Lucas bracers: Length: 20cm Width (top): 15cm Width (bottom): 12cm Weight: app. 0,7kg Lucas greaves: Length: 25cm Width (top): 20cm Width (bottom): 15cm Weight: app: 1,1kg This set contains the bracers and the greaves from the "Lucas" series.
Markward full legguard
A simple, but effective, armour for thigh and knee. Easy to combine with greaves, it offers good protection for your weaker part of the armoured body.The armour is strapped to the wearers hip by using belts and can be adjusted to the bodylength individually.The entire armour consists of eight pieces each and is therefore very flexible.Material: 1,2mm steelColour: blank, browned
Markward greaves
These are the "Markward" greaves, compatible to the rest of our "Markward" armour parts. They might be unadorned, but they look lean and elegant. Because of their simple design they fit many different armours and costumes you can combine them with.Material: 1.2mm steelLength: 37 cmWidth (taken on upper belt height): 26 cm
Markward guard set
Steel bracers and greaves not only protect your depicted character from the attacks of your enemies, they also protect you quite real when recreational heroines and heroes on castles and forests experience their adventures. Underbrush and stones can quickly cause bruises during outdoor activities. With this set, shins and forearms are protected against it. We offer you here the ' Markward ' set consisting of the bracers and the greaves in blank. With its slender lines and the simple design it fits well with all armour wearing costume ideas. Material: Steel Dimensions of Bracers: Length: 25 cm Width: 20 cm top, 14 cm bottom Weight. 900 g Dimensions of the greaves: Length 25 cm Width 20 cm top, 14 cm bottom Weight: 1.8 kgs We always recommend to wear pads under plate armour. This increases the wearing comfort and the protective effect enormously.
Mina greaves
The greaves "Mina" are kept simple, but with their curved tip they look both slim and elegant. Matching the armor series "Mina", the bracers also have a circumferential bead. Their functional cut and their good combinability with other armour parts from our range make them interesting for a variety of costume ideas. Material: Steel with 1.2 mm thickness Length: 30 cm Width: at the top 18 cm Width: at the bottom 14 cm
Nova greaves
The greaves of the "Nova" armour provide reliable protection for the shin and lower leg—whether in battle or against rocks and undergrowth. Their curved shape creates a harmonious look, while the side straps with sturdy buckles ensure a secure and adjustable fit. The asymmetrical design, featuring a longer outer side, offers additional protection in the most exposed areas. The "Nova" has been designed with great attention to detail in terms of shape and proportions. The result is a highly versatile piece of armour that impresses with its flowing lines and aesthetic elegance, offering you maximum comfort and freedom of movement. Material: Steel, leatherLength: 32 cmWidth (top): 23.5 cmWidth (bottom): 13.5 cmOur products are handcrafted, so dimensions and colours may vary slightly. Photographic representations and screen settings may not display colours accurately.
Ragnar greaves
The "Ragnar" greaves were made following historic nordic examples.The seven single steel strips are riveted onto two leatherstraps and are closed by two buckle-straps with wrought iron buckles.The lower parts on the ankles are folded outwards to ensure a free movement of the feet.Material: 2mm steelColour: blank/antiquedLength: 37cm, Width: 23,5cm (Top), 21cm (Bottom)
Rikomer greaves
The "Rikomer" plate armor is the brother of our "Dragomir" armor. Elaborately manufactured, it consists of a large number of lames and elements that, when combined, result in an extraordinary armor that can hardly be more agile. Every part from "Rikomer" is carefully flanged and coordinated with one another. Unlike "Dragomir", this armor is not decorated with beads and thus has an uncompromising, brutal look that contrasts with the finely shaped parts. "Rikomer" impresses with its design and the masterful execution that makes this armor so unique. It is also a more affordable than its brother "Dragomir". Armor like this is usually only available as a custom-made product and we had to fiddle a long time before we could get it ready for series production. Of course, the fit must and can be optimized here and there by careful bending, but we have designed the armor in such a way that it can be carried into the field with maximum comfort. The individual parts are kept bright, making Rikomer particularly suitable for noble knights and fighters of light. We generally recommend wearing a gambeson and arm and leg paddings under plate armor; This significantly improves wearing comfort and protection. Material: steel, leather
Rikomer leg armour browned Discontinued
Discontinued, only while stock lasts The "Rikomer" plate armor is the brother of our "Dragomir" armor. Elaborately manufactured, it consists of a large number of lames and elements that, when combined, result in an extraordinary armor that can hardly be more agile. Every part from Rikomer is carefully flanged and coordinated with one another. Unlike "Dragomir", this armor is not decorated with beads and thus has an uncompromising, brutal look that contrasts with the finely shaped parts. Rikomer impresses with its design and the masterful execution that makes this armor so unique. It is also a more affordable than its brother "Dragomir".Armor like this is usually only available as a custom-made product and we had to fiddle a long time before we could get it ready for serial production. Of course, the fit must and can be optimized here and there by careful bending, but we have designed the armor in such a way that it can be carried into the field with maximum comfort. The individual parts are burnished to protect them from rust, making the Rikomer burnished particularly suitable for dark knights and fighters of chaos.We generally recommend wearing a gambeson and arm and leg paddings under plate armor. This significantly improves wearing comfort and protection.Material: steel, leather
Tiberius Greaves
The "Tiberius" greaves are a reissued classic from our range of products. They were originally developed by us ~2007 for the "Conquest of Mythodea" as an NPC deal and can therefore still be found in one or the other armoury today. Since we have been asked for them from time to time, we have adapted them to our current standards in material & workmanship and are pleased to present them to you again! The "Tiberius" greaves are specially designed to protect the knee without a separate knee bump and are suitable for many medium to heavy armoured character concepts in fantasy and medieval LARP. Material: steel 1.2 mmLength to centre of instep: 48.5 cmWidth top: 22 cmWidth bottom: 20 cm
Vigor greaves
Our "Vigor" armour was designed for the more imposing characters on the battlefield – referring not only to their formidable fighting style. This armour set’s generous dimensions make it comfortable for longer periods of time even for powerfully built warriors of both genders. However, a small tweak in design also allows adjusting "Vigor" to slender people. To do so, you simply have to remove the central tasset from the armour belt and, if necessary, shorten the belt. In so doing, you can improve the fit for wearers with slimmer hips. The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of tabletop miniatures. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn, but well-cared-for character. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand, it is unique for every single armour. However, if you’d prefer your armour unburnished, you can also easily remove the burnishing layer using a soft abrasive fabric.The greaves are long enough to also protect the wearer’s knees. The upper part is mounted to be movable, making movements such as kneeling easier. The sweeping knee protection is another very special design element of this armour set. Broad cutouts for your feet as well as bent edges increase wearing comfort. It goes without saying that all edges of these armour pieces are beaded. Material: steel, leatherGreaves: Length: 52cm Circumference (upper strap): 26cm Circumference (lower strap): 20cm Weight (pair): approx. 4kg The parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight. Adjustments to several of the measurements are possible by carefully bending the respective armour parts.
Vladimir greaves
The "Vladimir" greaves are made of curved segments decorated with beading and rivets. The knee tile is movable so that it does not restrict mobility in combat. A peculiarity of these leg rails is that they are also closed on the back of the calf. Material: SteelLength: 53 cmWeight 4.8 kgColour: blank, browned