LE spray universel de la société Ballistol. Peut être utilisé pour le métal, ainsi que pour le cuir et divers autres matériaux. Nous le conseillons pour l'entretien des armures métalliques et les armures en cuir.Le spray pratique de 50 ml pour vos voyages ou le grand spray de 200 ml pour votre maison.Veuillez lire la section des avertissements sur les conteneurs.Ne peut pas être exporté en dehors de l'UE en raison de la législation de l'UE.
La série "Arthur" comporte des coutures en losange pour permettre une mobilité maximale. Le torse comporte quatre sangles sur le devant. Aux bras et au bas, il est doté d'œillets pour accrocher les manches et les tassettes.Le collier est flexible pour plus de confort, et les coudes comportent plus de matelassage."Arthur" est plus fin que la plupart de nos gambisons, donc très confortable sous une armure de plate. Vous pouvez bien sûr le porter sous une cotte de mailles, aussi.Matières : canevas, polyester, cuir suédéTailles : S-XXLCouleurs : marron, noir
Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. This belt shield was, just like the entire "Lucas" series, built with a corrugation along the edge. It is worn on the belt, which is pulled through the two leather belt loops on the top. Naturally it can be worn as a small tasset on the thigh. The belt shields are, just like our arm shields, ideal to be painted, modded and combined with existing costume parts. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to üainting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint.
Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g
The "Felix" greaves for small heroes and heroines are made from extremely sturdy leather, very flexible and offer protection against bruises etc. while fighting with padded swords, or when playing in the woods. We recommend to combine them with our padded greaves, to enhance the comfort of wearing.
Material: split leatherColours: brown, blackLength: 26cmWidth: 21cm
Une très belle pochette de ceinture en toile résistante. Elle offre tout
l'espace dont vous avez besoin. Il y a deux passants de ceinture à
l'arrière et elle se ferme avec un bouton / boucle à l'avant.Longueur : 19 cmLargeur : 3,5 cmHauteur : 14 cmLargeur des passants de ceinture : 5 cmMatières : 100% Canvas (toile de coton)
The water bottle "Bruna" is sewn by hand from sturdy leather. It is an indispensable companion on hikes, battlefields and in dusty dungeons. Inside, it hides an easy-care PET inlay with a capacity of approx. 1.5 litres. The leather strap is removable, so the "Bruna" water bottle can also be attached to other carrying systems or can be placed on a table without a strap. We recommend rinsing the bottle thoroughly with warm water before using it for the first time. Please do not fill your "Bruna" water bottle with hot drinks, as this can damage the PET inlay. We recommend storing your bottle opened, with the plug removed, so it can dry. If you want to use it again, just put the plug in water for a few hours, so it will close tight again.Material: leather, PET
Capacity: 1.5 litres
Length: 25 cm
Width: 8 cm
Weight: approx. 400 g This item is a medieval prop that is only produced in small quantities. For this reason, costly food certification is uneconomical or would have a massive impact on the selling price. Therefore, we are obliged to provide the following information: Prop - not certified or suitable for contact with food.
The Gunnar trousers are a Rus or Viking pants and can be especially well-suited for Nordic costumes. We have focused on the usability in LARP with this trousers. It has some features that are not very historical but really practical. Belt loops, pockets, and a front button placket make it a pair of pants that can be comfortably worn in all situations at a LARP, a medieval market, or even in everyday life.
Material: 100% cotton
M
L
XL
XXL
XXXL
Waistband circumference
91
100
111
121
132
Hip circumference
120
128
138
145
154
Inside length of trouser leg
83
85
87
89
89
Length of bottom part of leg
34
35
36
37
37
Upper leg circumference
80
85
91
96
102
Circumference upper edge of lower part
40
45
50
58
59
All figures are in cm. Our products are handmade, dimensions and colours may therefore differ slightly.
À l'origine la jupe était un vêtement pour hommes et femmes. C'était
porté au jour le jour par toutes classes sociales. Plus tard, la jupe a
pris la forme telle qu'on la connaît aujourd'hui.Cette jupe
longue avec plis de notre série "Ursula" est réalisée en canevas premium
et présente une coupe aérée. Il se ferme avec un laçage sur la hanche
ou dans le dos.Matière : 100% canevas (toile de coton)Tailles : S à XXL
Fabriqués à la main en Italie par "Fucina del drago", ces dessous de verre en cuir sont une extension spéciale de notre gamme de produits. Nous vous recommandons de les utiliser avec nos chopes à bière ou nos gobelets à vin.Différents motifs et couleurs disponibles.Matière : 100% cuir vacheLongueur : 10,5 cmLargeur : 10,5 cm
The skirt "Nelly" is cut
straight and an ideal basis for many costume ideas. Side lacing made
of sturdy cord allows you to adjust the size and fit. With the
decorative ruffles on the hem it can be worn both as outerwear and
petticoat. Whether with a bodice as a Tavern Maid, armor as an
adventurer or with an overdress as a noblewoman, combine "Nelly"
with many other costume parts to create your unique garment.Material
100% cotton
Sizechart:
S
M
L
XL
XXL
Waist circumference
75
83
92
105
119
Hip circumference
105
111
118
128
139
Total length with ruche
97,5
98,5
100
101,5
102,5
All figures are in cm. Our products are
handmade, dimensions and colours may therefore differ slightly.
Cet écusson est adapté pour être apposé sur des boucliers, des tabards
ou des bannières. Le verso dispose d'un adhésif à repasser, ainsi
l'écusson peut être facilement fixé avant de le coudre.Matières : Canvas (toile de coton), polyesterMesures de l'écusson grande tailleHauteur : 35 cmLargeur : 20 cmPoids : 25 grMesures de l'écusson moyenne tailleHauteur : 20 cmLargeur : 10,5 cmPoids : 8 gr
5,99 €*
14,90 €*(économie de 59.8%)
Plus de 25 ans d'expérience
Choix parmi 5 000+ articles
Livraison gratuite à partir de 100€ (DE)
Envoi express en 24h (DE)
Ce site Web utilise des cookies pour garantir la meilleure expérience possible. Plus d'informations...