Bolt round head long black
Bolt round head long black
10,90 €
- Oltre 25 anni di esperienza
- Scegli tra più di 5.000 articoli
Info sui prodotti "Bolt round head long black"
The round-head bolt from iDV Engineering was developed for use with LARP crossbows. The padded round head distributes impact energy over a large area and meets the high safety standards required for modern LARP projectiles. The flexible fibreglass composite shaft provides excellent flight characteristics and high durability.
The robust plastic fletching is specifically designed for use with crossbows and is more durable than traditional natural feathers.
Material: Fibreglass and foam padding
Shaft length: 35.5 cm
Overall length: 43 cm
This bolt is compatible with our Sicuro crossbow and all LARP crossbows with a shaft length of up to 35.5 cm.
Disclaimer: In this category you will find ranged weapons specifically designed for the safe portrayal of combat. The arrows and bolts feature foam safety heads with pressure distributors to help prevent injuries. They are intended for use with ranged weapons developed for LARP and designed with reduced draw weight and shooting power.
I clienti hanno visto anche
Freccia prodotta in Germania da IDV. Testa piatta ideata per le corte distanze, per questo indicata con il codice LD (low distance).L’asta in fibra di vetro di alta qualità ha una lunghezza di 30 pollici (76 cm). Impennaggio in gomma in blocco unico. Colore impennaggio: nero, blu, verde, bordeaux, bianco/fosforescenteDichiarazione di non responsabilità: tutti gli oggetti qui mostrati sono stati appositamente progettati per combattimenti in ambient controllati come eventi di gioco di ruolo dal vivo, archery tag e simili. Tutte le frecce ed i dardi hanno teste imbottite in schiuma poliuretanica morbida per distribuire l’impatto ed evitare infortuni. Devono essere lanciati con armi LARP con potenza limitata.
The crossbow Bernardo is manufactured in a small workshop in Italy and convinces by careful workmanship and a reliable release mechanism. The shaft is made of robust wood, the bow and stirrup, as well as the trigger, are made of burnished steel. The safety pin above the release lever is easy to reach. This allows the crossbow to be quickly unlocked before each shot and secured again for reloading. Bernardo can be dismantled for transport. The cotter pin at the front must be removed, stirrup and bow can then be removed. Two bolt clamps are included in the delivery for bolts with different shaft thicknesses. These hold the bolts on the crossbow firmly and provide the necessary distance to the tendon. The bolt clamps can easily be changed with a screw. For our Bernardo bolts we recommend the bolt clamp for narrower bolts. These can be brought to the desired pressure strength by carefully bending them open. The bolt should always rest firmly over the entire length of the guide groove. The crossbow has a strength of about 30 pounds. Please always use them responsibly within the rules of your event. We recommend that you always load them in a secure condition and pay attention to your fingertips when shooting. The split for securing the stirrup as well as the string are available as spare parts from us. The limbs and stirrup can be reordered from the manufacturer if required. Please contact our support team. Material: wood, steel, bowstring Tensile strength 30 pounds Length: 78 cm Width: 62 cm For bolts with a shaft length of 28 cm Weight: 1,4 Kg Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like liveroleplay events etc.. The bows & crossbows have limited power compared to modern sport equipment.
Questi morbidi dardi sono prodotti per le balestre IDV/Eysenkleider. la testa tonda è adeguata a tiri lunghi, quella piatta per tiri corti, più tesi.Le piume sono fluorescenti – caricatele con la luce prima di tirare per poterle poi trovare più facilmente. Lunghezza: 15'' (39cm)/da testa a incocco = 35cm/14''Materiale: fibra di vetro, plastazote
Material: fibreglas and padding-foamLength: 9" (23cm) + safety headColor: blackPlease note that this bolts do not fit our Bernardo pistol crossbow. Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like liveroleplay events etc.. All arrows & bolts have padded heads made of foam and pressure distributors made of plastic to avoid injuries, and are made to be shot from larp weapons with limited power.
I clienti hanno acquistato anche
The crossbow Bernardo is manufactured in a small workshop in Italy and convinces by careful workmanship and a reliable release mechanism. The shaft is made of robust wood, the bow and stirrup, as well as the trigger, are made of burnished steel. The safety pin above the release lever is easy to reach. This allows the crossbow to be quickly unlocked before each shot and secured again for reloading. Bernardo can be dismantled for transport. The cotter pin at the front must be removed, stirrup and bow can then be removed. Two bolt clamps are included in the delivery for bolts with different shaft thicknesses. These hold the bolts on the crossbow firmly and provide the necessary distance to the tendon. The bolt clamps can easily be changed with a screw. For our Bernardo bolts we recommend the bolt clamp for narrower bolts. These can be brought to the desired pressure strength by carefully bending them open. The bolt should always rest firmly over the entire length of the guide groove. The crossbow has a strength of about 30 pounds. Please always use them responsibly within the rules of your event. We recommend that you always load them in a secure condition and pay attention to your fingertips when shooting. The split for securing the stirrup as well as the string are available as spare parts from us. The limbs and stirrup can be reordered from the manufacturer if required. Please contact our support team. Material: wood, steel, bowstring Tensile strength 30 pounds Length: 78 cm Width: 62 cm For bolts with a shaft length of 28 cm Weight: 1,4 Kg Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like liveroleplay events etc.. The bows & crossbows have limited power compared to modern sport equipment.
The quiver "Arnulf" does not only hold lots of bolts, but can also be tied up while running so you can keep a secret reserve of bolts. The quiver holds up to 10 bolts.Colour: brown/blackMaterial: suede, upper leatherDiameter: approx. 16 cm, heigth: 29 cm/39 cm when laced up
Du möchtest spontan auf eine Veranstaltung und brauchst noch schnell ein Ambiente taugliches Besteck? Du fährst mit der Bahn und musst auf das Gewicht deines Gepäcks achten? Oder suchst du einfach eine Alternative zum Metallbesteck, weil es nicht zu deinem Charakter passt? Dafür haben wir eine Lösung! Mit unserem Besteck aus Bambus bekommst du ein leichtes, wiederverwendbares Set aus Löffel, Gabel, Essstäbchen und Trinkhalm. In einer kleinen Manufaktur in Vietnam gefertigt, verzichtet der Hersteller auf Chemikalien und benutzt ausschließlich ungiftige Schutzlasuren. Der Bambus wird vor der Produktion gekocht, getrocknet und dann verarbeitet. Das Besteck eignet sich nicht für die Verwendung in einer Mikrowelle oder Spülmaschinen. Material: Bambus Länge aller Besteckteile: ca. 20 cm Gewicht : 40 g Bei diesem Artikel handelt es sich um ein Produkt, dass nur in geringen Stückzahlen hergestellt wird. Aus diesem Grund ist eine kostspielige lebensmittelrechtliche Zertifizierung unwirtschaftlich oder würde sich massiv auf den Verkaufspreis auswirken. Daher sind wir zu folgendem Hinweis verpflichtet: Requisite - nicht für den Kontakt mit Lebensmitteln zertifiziert bzw. geeignet.
The bow limb with string from our popular Bernard and Sicuro crossbows from Italy is suitable as a replacement part or for custom builds. Please note that this bow limb is not compatible with the Bernardo double or pistol crossbows. Material:Steel, Dacron Our products are handcrafted, so dimensions and color tones may vary slightly. Photographic images and screen settings may not represent colors accurately.