Passa al contenuto principale Salta alla ricerca Passa alla navigazione principale

Bolt round head short noctilucent

Info sui prodotti "Bolt round head short noctilucent"

Material: fibreglas and padding-foam
Length: 9" (23cm) + safety head
Color: noctilucent

Attention: These bolts do not fit our Bernardo pistol crossbow.

Disclaimer: In this category you will find ranged weapons that have been specially developed for safe combat. The arrows & bolts have safety heads made of foam with pressure distributors to prevent injuries. They are designed to be used with ranged weapons developed for Larp with reduced shooting power.

Salta la galleria dei prodotti

I clienti hanno visto anche

Jost schinieri
Jost schinieri

Questi schinieri sono davvero speciali. Il caratteristico taglio è semplice, tuttavia ha un'utile controcurva in fondo, che offre spazio extra per muovere la caviglia.Un utile e confortevole paio di schinieri della serie "Jost" Materiale:Acciaio 1,2mm"Colore": Acciaio & Brunito

Prezzo normale: 44,90 €
Bolzen-Flachkopf-kurz-nachtleuchtend
Bolt flat head short noctilucent

This padded bolt is made at IDV and fits most shorter crossbows.The flat head was made for short distance shots. The fletches are night glowing – just load them up with a flashlight prior to shooting and find them easier.Material: fibreglas and padding-foamLength: 9" (23cm) + safety headHead diameter: ~ 5.5 cm Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like liveroleplay events etc..  All arrows & bolts have padded heads made of foam and pressure distributors made of plastic to avoid injuries, and are made to be shot from larp weapons with limited power.

Prezzo normale: 10,90 €
Seraphim Spallacci
Seraphim Spallacci

I nostri spallacci "Seraphim" sono un pezzo speciale fini a se stessi: il design è volutamente non storico, ma fantastico. Sono resi molto opulenti e sottolineano l'aspetto del mettersi in "mostra" e di essere impressionanti. La sezione superiore, che comprende uno dei tre spezza-spada, è fissato al corpo di chi lo indossa con un unico cinturino in pelle. I due spezza-spada successivi sono montati su un'altra parte flessibile e forniscono una certa mobilità, nonostante la dimensione degli spallacci. La fibbia sulla parte superiore degli spallacci viene utilizzata per attaccarli a tutte le nostre gorgiere ed alle corazze di piastra. La dimensione degli spallacci è impressionante, senza perdere efficacia nonostante la grandezza. Materiale: acciaio 1,2mm Lunghezza: 42 cm Larghezza: 31 cm Peso: app. 4kg Colore: lucido, brunito

Prezzo normale: 149,90 €
Reginald elmo
Reginald elmo

Questo fantastico elmo è realizzato con molti pezzi di metallo, rivettati insieme per formare questa stravagante protezione per la testa. La visiera può essere sollevata senza problemi per consentire a chi lo indossa una migliore respirazione e visibilità. La parte inferiore lungo collo è rifinita con un ampia sezione per una maggiore protezione. L'elmo viene consegnato senza un'imbottitura interna e senza il cinturino di regolazione. Materiale: acciaio da 1 mm Dimensione: circonferenza interna di 66 cm Colore: lucido, brunito

Prezzo normale: 109,90 €
Bolzen-Rundkopf-kurz-schwarz
Bolt round head short black

Material: fibreglas and padding-foamLength: 9" (23cm) + safety headColor: blackPlease note that this bolts do not fit our Bernardo pistol crossbow. Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like liveroleplay events etc..  All arrows & bolts have padded heads made of foam and pressure distributors made of plastic to avoid injuries, and are made to be shot from larp weapons with limited power.

Prezzo normale: 9,90 €
Salta la galleria dei prodotti

I clienti hanno acquistato anche

Balestra pistola Bernardo
Balestra pistola Bernardo

La balestra a pistola "Bernardo" è prodotta artigianalmente in Italia. Dettagli di pregio e meccanismo super efficiente e sicuro. Il teniere è in legno massello, flettenti, staffa, sicura e grilletto sono in acciaio con finitura brunita. La sicura blocca il grilletto deve essere inserita prima di armare per evitare uno sparo accidentale. La balestra “Bernardo" può essere facilmente smontata per il trasporto. Per fare ciò è necessario rimuovere il perno di sicurezza sul frontale; la staffa e l’arco possono quindi essere rimossi. La balestra ha una forza di trazione di circa 30 libbre. Si prega di usarli sempre responsabilmente all'interno delle regole del vostro evento.Materiale: legno, acciaio, corda dell'arco DacronResistenza alla trazione 30 libbreLunghezza: 46 cmLarghezza: 43 cmPer dardi con una lunghezza del teniere di 28 cm o piùPeso: 915gr.Dichiarazione di non responsabilità: in questa categoria troverai armi a distanza che sono state sviluppate appositamente per la rappresentazione sicura del combattimento. Gli archi e le balestre hanno una potenza di tiro ridotta rispetto alle normali attrezzature sportive. Nota: le balestre rientrano nella legge italiana tra le armi, ma non richiedono un permesso. Pertanto sono soggetti a limiti di età (l’acquisto può essere effettuato soltanto da persone maggiorenni).

Prezzo normale: 199,90 €
Bolzen-Rundkopf-kurz-schwarz
Bolt round head short black

Material: fibreglas and padding-foamLength: 9" (23cm) + safety headColor: blackPlease note that this bolts do not fit our Bernardo pistol crossbow. Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like liveroleplay events etc..  All arrows & bolts have padded heads made of foam and pressure distributors made of plastic to avoid injuries, and are made to be shot from larp weapons with limited power.

Prezzo normale: 9,90 €
Bernardo crossbow
Bernardo crossbow

The crossbow Bernardo is manufactured in a small workshop in Italy and convinces by careful workmanship and a reliable release mechanism. The shaft is made of robust wood, the bow and stirrup, as well as the trigger, are made of burnished steel. The safety pin above the release lever is easy to reach. This allows the crossbow to be quickly unlocked before each shot and secured again for reloading. Bernardo can be dismantled for transport. The cotter pin at the front must be removed, stirrup and bow can then be removed. Two bolt clamps are included in the delivery for bolts with different shaft thicknesses. These hold the bolts on the crossbow firmly and provide the necessary distance to the tendon. The bolt clamps can easily be changed with a screw. For our Bernardo bolts we recommend the bolt clamp for narrower bolts. These can be brought to the desired pressure strength by carefully bending them open. The bolt should always rest firmly over the entire length of the guide groove. The crossbow has a strength of about 30 pounds. Please always use them responsibly within the rules of your event. We recommend that you always load them in a secure condition and pay attention to your fingertips when shooting. The split for securing the stirrup as well as the string are available as spare parts from us. The limbs and stirrup can be reordered from the manufacturer if required. Please contact our support team. Material: wood, steel, bowstring Tensile strength 30 pounds Length: 78 cm Width: 62 cm For bolts with a shaft length of 28 cm Weight: 1,4 Kg Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like liveroleplay events etc.. The bows & crossbows have limited power compared to modern sport equipment.

Prezzo normale: 199,90 €
Arnulf bolt quiver canvas
Arnulf bolt quiver canvas

The quiver "Arnulf" does not only hold lots of bolts, but can also be tied up while running so you can keep a secret reserve of bolts.The quiver holds up to 10 bolts. Material: canvas, upper leather Diameter: approx. 16 cm, heigth: 29 cm/39 cm when laced up

Prezzo normale: 49,90 €