Copertura per scudo Berengar

Info sui prodotti "Copertura per scudo Berengar"

Copertura rettangolare in resistente cavas per scudo Berengar. Si stringe allo scudo stringendo un laccetto lungo i lati.Vi consigliamo le nostre toppe per personalizzare il tuo scudo.Altezza: 100 cmLarghezza: 65 cm

I clienti hanno visto anche

Copertura per scudo Berengar

19,90 €*

Copertura per scudo Berengar

19,90 €*

Copertura per scudo Berengar

19,90 €*

Copertura per scudo Berengar

19,90 €*

I clienti hanno acquistato anche

Berengar Shield 2nd Edition

The shield "Berengar" is based on the typical angular shields of Roman legionaries. Made of robust PU foam, it does not require latex or any other coating. On the back, it has a flexible plate in which a sturdy handle and a strap with buckle are screwed. Several leather loops are attached to the edge for attaching one of our many "Berengar" fabric covers fabric cover. Material: PU foam Height: 100 cm Width: 65 cm

79,90 €*

Bothild water bottle

The water bottle "Bothild" is handmade from sturdy leather. It's a reliable companion for hikes, battlefields, and dusty dungeons. Inside, it features an easy-to-maintain PET inlay with a capacity of about 0,75 litres. The detachable leather carrying strap allows you to attach the "Bothild" water bottle to various carrying systems, or place it without the strap on a table. Before the first use, we recommend thoroughly rinsing the bottle with warm water. Please do not pour hot drinks into the "Bothild" water bottle, as it could damage the PET inlay. To allow the wooden plug to dry, it's best to store the bottle open. If you wish to use the bottle again, simply soak the plug in water for a few hours to ensure a tight seal once more. Material: Leather, PETCapacity: 0.75 litresThis item is a medieval prop that is only produced in small quantities. For this reason, costly food certification is uneconomical or would have a massive impact on the selling price. Therefore, we are obliged to provide the following information: Prop - not certified or suitable for contact with food.

44,90 €*

Sicuro crossbow

This crossbow is the longer version of our popular "Bernardo" crossbow and is suitable for shooting our long IDV bolts. "Sicuro" is manufactured in a small workshop in Italy and stands out through careful craftsmanship and a reliable release mechanism. The shaft is made of sturdy wood, the bow and stirrup as well as the trigger are made of burnished steel. The safety pin above the release lever is easy to reach. This allows quickly unlocking the crossbow before each shot and securing it again for reloading."Sicuro" can be dismantled for transport. If the pin at the front is removed, the stirrup and bow can be detached. Two bolt clamps are included in the delivery for bolts with different shaft thicknesses. These serve to firmly hold the bolts on the crossbow and provide the necessary distance to the string. The bolt clamps can easily be changed with a screw. For IDV bolts as well as Sicuro bolts, we recommend the bolt clamp for narrower bolts. These can be adjusted to the desired pressure strength through carefully bending. The bolt should always sit firmly along the entire length of the guide groove. The crossbow has a draw weight of about 30 pounds. Please always use it responsibly in accordance with the rules of your event. We recommend to always load the crossbow when secured and mind to your fingertips when shooting.We offer both the split for securing the stirrup as well as the string as spare parts. The limbs and stirrup can be re-ordered from the manufacturer if required. Please contact our support team. Material: wood, steel, bowstring Draw weight: 30 pounds Length: 83cm Width: 62cm For bolts with a shaft of 33.5cm or more Weight: 1.4kg Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like live roleplay events etc. The bows & crossbows have limited power and range compared to normal sport equipment. Note: Crossbows fall under the German Weapons Act (WaffG), but do not require a permit (see Appendix 1 & 2). Therefore they are age restricted. For other countries we ask you to inform yourself about the applicable legal situation before buying.

199,90 €*

Arnulf bolt quiver canvas

The quiver "Arnulf" does not only hold lots of bolts, but can also be tied up while running so you can keep a secret reserve of bolts.The quiver holds up to 10 bolts. Material: canvas, upper leather Diameter: approx. 16 cm, heigth: 29 cm/39 cm when laced up

49,90 €*

Galatea blouse linen

The Galatea blouse from the Everlight series is crafted from airy, lightweight linen fabric, offering an elegant yet comfortable fit. The distinctive design features a stand-up collar, subtle buttons, and a gentle asymmetry at the hem. Our "Everlight" series is dedicated to elves, fairies, and other mythical beings, whether it’s the secretive drows, nature-bound wood elves, or the noble high elves.Material: 50% linen, 50% cotton SMLXLXXLChest circumference93101110122135Hip circumference105111118129140Sleeve length6060,56161,562HPS length (shorter side)69,570,571,572,573,5All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

39,90 €*