A crown patch in heavy cotton canvas. Use this patch to tune up your shield cover or your costume. The back is made with a fusible, so you can iron it onto your cloth. The fabric can easily be painted - a great possibility to individualize your patch even more. The crown is some 10cm high and app. 17cm wide.
The "Korbin" belt badges in different shapes are ideal for presenting your coat of arms colors with them. They can be additionally decorated with our patches or fabric paints.
Material: cottonLength: 35 cmWidth: 12.5 cm
Discontinued, only while stocks lastThis simple cloak is closed with a strap around the collar and spreads widely at the bottom. It is made of heavy cotton and thus even protects you from wind and rain for a while. We intentionally designed it without a hood to make it suit many different character concepts. It is ideal for beginners as it offers a very good price performance ratio.Material: Heavy cottonLength: Approximately 133cm
This rectangular shield cover is part of our clever shield system. It is made of robust cotton fabric. On the back it has got a drawstring that is used to fix it round the shield. Additionally is has got several strap loops for the tie straps on the shield.
We recommend our patches to customize your shield.
Height: 100cmWidth: 65cm
This triangular shield cover is part of our clever shield system. It is made of robust cotton fabric. On the back it has got a drawstring that is used to fix it round the shield. Additionally is has got several strap loops for the tie straps on the shield.Height: 80cmWidth: 52cm
Discontinued, only while stocks lastA very becoming wide cut cloak with stand-up collar and pelerine. It is closed with a button in the front. At the sides it has slits for the arms.
The cloak "Tilly"
already comprises the first half for all "cloak-and-dagger"-inspired
outfits ‒ if you'll allow the crude pun; the fact is that this hip-length
shoulder cape contributes greatly to the visual appearance of any outfit resembling
musketeers or any other rapier or dagger wielding hero of the 17th century. It
is worn over one shoulder and held in place with a strap beneath the other arm.
This allows freedom for the sword arm so the wearer can dance with beguiling
ladies or quarrelsome villains. Made of strong premium wool fabric, it is a
faithful companion even in tight spots. It is well up to shielding the wearer
from light rain, but bear in mind that it is an accessory rather than
functional apparel. Rogues, charming heroes and heroins, but also merchants and
highborn lords and ladies are always well clad with the Tilly cloak.
Material: 100 % wool
Length: approx. 90 cm
Width: approx 240 cm
Colours: Brown, black
The "Korbin" belt badges in different shapes are ideal for presenting your coat of arms. They can be additionally decorated with our patches or fabric paints.
Material: cottonLength: 35cmWidth: 12.5cm
The "Korbin" belt badges in different shapes are ideal for presenting
your coat of arms. They can be additionally decorated with our patches
or fabric paints.
Material: cottonLength: 35cmWidth: 12.5cm
The "Korbin" belt badges in different shapes are ideal for presenting your coat of arms colors with them. They can be additionally decorated with our patches or fabric paints.
Material: cottonLength: 35 cmWidth: 12.5 cm
The cape is the primary form of mantles: Open on one side a circle of fabric has a opening in the middle for the head. Thrown over the shoulders it is closed with a button and a sling. Our Cape Gora has an hood with an extra long tail, functioning as a scarf during rough weather. Made from sturdy thick cotton canvas it offers lots of protection.It comes in a variety of colours so you can combine it with every other costume.UnisizeMaterial: CottoncanvasLength: 138 cmDiameter of throat: 48 cmLenght of Hood with tail: 90 cmWeight: approx 2 kgColours: black, brown, grey, green, bordeaux
A pretty hooded cape made of cotton. It has got a pleated collar that makes it very becoming. It is closed with a decorative button in the front. The collar size can be adjusted a little with a second button. Material: CottonLength: 100cm, onesize
Discontinued, only while stocks lastA very becoming, wide cut cloak with stand-up collar. It is closed with a button in the front. At the sides it has slits for the arms so you stay tucked in warm while using your hands.The cloak is made wit a slit in the back - this way it will not interfere with the wearers active movement but fall in a very pleasant way.Length: 130cmBottom seam circumfence: 154cm
Simple, but simply good! The Aaron cloak has a plain classic cut, a large hood and is closed with a button. Made from wool it protects you even better from wind and rain. The amazing price-performance ratio makes it one of our most favoured articles. The cloak comes in various colours so it matches almost all types of costumes. A faithful companion for a real good price!
Material:
Wool (Wool 70%, polyester 20%, viscose 10%)
Length: 140 cm
Weight 1.3 kgUnisize
This war standard is made from canvas. The colors are applied squared and match historical designs. We recommend to embroider the standard with your crest or to decorate it with our range of Patches.Material: heavy cottonLength: 160cm, width: 75cm, max. diameter for the loop: 8cmDelivered without mounting
The cloak "Tilly" already comprises the first half for all "cloak-and-dagger"-inspired outfits ‒ if you'll allow the crude pun; the fact is that this hip-length shoulder cape contributes greatly to the visual appearance of any outfit resembling musketeers or any other rapier or dagger wielding hero of the 17th century. It is worn over one shoulder and held in place with a strap beneath the other arm. This allows freedom for the sword arm so the wearer can dance with beguiling ladies or quarrelsome villains. Made of strong premium cotton fabric, it is a faithful companion even in tight spots. It is well up to shielding the wearer from light rain, but bear in mind that it is an accessory rather than functional apparel. Rogues, charming heroes and heroines, but also merchants and highborn lords and ladies are always well clad with the Tilly cloak.Material: 100 % cottonLength: approx. 90 cmWidth: approx 240 cmColours: Black, red, and burgundy
The "Korbin" belt badges in different shapes are ideal for presenting your coat of arms colors with them. They can be additionally decorated with our patches or fabric paints.
Material: cottonLength: 35 cmWidth: 12.5 cm
The "Korbin" belt badges in different shapes are ideal for presenting
your coat of arms. They can be additionally decorated with our patches
or fabric paints.
Material: cottonLength: 35cmWidth: 12.5cm
A bear stands in heraldry for strength and cunning. But also for health and protection. This patch is ideally suited to be affixed to shields, coats of arms or banners. The back is equipped with an ironing adhesive, so the patch can be easily fixed before sewing. The carrier material is a stable woven Canvas
Material: Cottoncanvas, polyester
Dimensions of the large variant:Height: 35 cmWidth: 20 cmWeight: 25 g
Dimensions of the medium variantHeight: 20 cmWidth: 10,5 cmWeight: 8 g
Sizes: large & mediumColours: Brown, cream, black
The unicorn is a symbol of purity and virtue in heraldry, but also of royal jurisdiction. This patch is very detailed and ideally suited to be affixed to shields, tabards or banners. The back is equipped with an iron-on adhesive, so
the patch can be easily attached before sewing.
Material: Cotton canvas, polyester
Measurements of the large versionHeight: 33cmWidth: 30cmWeight: 26g
Measurements of the medium versionHeight: 19cmWidth: 17cmWeight: 6g
Sizes: large & mediumColours: yellow, cream, red, black
The St. Benedicts cross in heavy cotton canvas. Use this patch to tune up your shield cover or your costume. The back is made with a fusible, so you can iron it onto your cloth. The fabric can easily be painted - a great possibility to individualize your patch even more.
Material: cotton canvasMeasurements:Small: 5 x 5 cmMedium: 20 x 20 cmLarge: 35 x 35 cm
The cross of the Knights of Malta as a convenient, high-quality, fringed patch that allows you to avoid creating the design yourself. The back contains an iron-on adhesive. The fabric is easy to individualized according to your ideas by means of fabric paints.
Measurements: Small: 5 x 5cmMedium: 20 x 20cmLarge: 35 x 35cmMaterial: cotton canvas
The chaos star in heavy cotton canvas. Use this patch to tune up your shield cover or your costume. The back is made with a fusible, so you can iron it onto your cloth. The fabric can easily be painted - a great possibility to individualize your patch even more.
Diameter:Medium: ~19cm Material: cotton canvas
In heraldry, the griffin stands for valor, perseverance, and courage. We offer this finely crafted and detailed heraldic animal as a bi-coloured patch. It is ideally suited to be affixed to shields, tabards, or banners. The back is equipped with an iron-on adhesive, so the filigree patch can be easily attached before sewing. The carrier material is a stable cotton canvas.
Material: Cotton canvas, polyester
Measurements of the large patchHeight : 34cmWidth: 29cmWeight: 30g
Measurements of the medium patchHeight : 20cmWidth: 16cmWeight: 7g
Sizes: large & mediumColours: yellow, cream, red, black
In heraldry, the stag stands for peace and harmony, but also for politics and diplomacy. He is depicted mid-leap on this detailled embroidered patch. This patch is ideally suited to be affixed to shields, tabards, or banners. The back is equipped with an iron-on adhesive, so the patch can be easily attached before sewing. The carrier material is a stable cotton canvas.
Material: Cotton canvas, polyester
Measurements of the large variant:Height: 29cmWidth: 23cmWeight: 20g
Dimensions of the medium variant:Height: 19cmWidth: 16cmWeight: 9g
Sizes: large & mediumColours: yellow, cream, red, black
The eagle symbolizes immortality, courage, foresight and power in the heraldry.
This patch is ideally suited to be affixed to shields, coats of arms or banners. The back is equipped with an ironing adhesive, so the patch can be easily fixed before sewing. The carrier material is a stable cotton canvas. For technical reasons, not all parts of the eagle are cut out. This can easily be done with a scalpel before sewing.
Material: Cotton canvas, polyester
Dimensions of the large variant:Height: 35 cmWidth: 33.5 cmWeight: 50 g
Dimensions of the medium variant
Height: 19 cmWidth: 19 cmWeight: 20 g
Sizes: large & MediumColours: yellow, cream, black
A laurel wreath is a sign of glory, victory and honour. It is often used to supplement an existing coat of arms, perhaps after a victorious battle or a fulfilled quest. This filigree patch consists of two parts, so the width and circumference of the wreath can be adjusted to your liking. For technical reasons, not all leaves are cut out. However, this can easily be remedied with a scalpel before sewing. This patch is ideally suited to be affixed to shields, tabards or banners. The back is equipped with an iron-on adhesive, so
the patch can be easily attached before sewing. The carrier material is a stable cotton canvas.
Material: Cotton canvas, polyester
Measurements of the large version:
Height: 5cmDiameter (semicircle): 30cmLength: 42cmWeight: 13g
Measurements of the medium version:
Height: 4cmDiameter (semicircle): 16cmLength: 26cmWeight: 3gSizes: Large & mediumColours: green, yellow, cream
The Fleur-de-Lis in heavy cotton canvas. Use this patch to tune up your shield cover or your costume. The back is made with a fusible, so you can iron it onto your cloth.The fabric can easily be painted - a great possibility to individualize your patch even more.Measurements: 20cm x 17cmMaterial: cotton canvas
A crown patch in heavy cotton canvas. Use this patch to tune up your shield cover or your costume. The back is made with a fusible, so you can iron it onto your cloth. The fabric can easily be painted - a great possibility to individualize your patch even more. The crown is some 10cm high and app. 17cm wide.
Material: cotton canvas
The cross of the Knights Templar as a convenient, high-quality, fringed patch that allows you to
avoid creating the design yourself. The back contains an iron-on
adhesive. The fabric is easy to individualized according to your ideas
by means of fabric paints. .
Measurements: Small: 5 x 5cmMedium: 20 x 20cmLarge: 35 x 35cmMaterial: cotton canvas
A skull in heavy cotton canvas. Use this patch to tune up your shield cover or your costume. The back is made with a fusible, so you can iron it onto your cloth. The fabric can easily be painted - a great possibility to individualize your patch even more.
Measurements:Medium:20cm x17cm Material: cotton canvas
The lion stands for strength and valor. This patch is ideally suited to be affixed to shields, coats of arms or banners. The back is equipped with an ironing adhesive, so the patch can be easily fixed before sewing. The carrier material is a stable woven.
Material: Cottoncanvas, polyester
Measurements of the large patchHeight: 34 cmWidth: 24 cmWeight: 30 g
Measurements of the medium patch
Height: 19,5 cmWidth: 14 cmWeight: 5 g
Sizes Big & MediumColours: yellow, natural, red, black
Our heraldic patch "Castlew" is classic but rich in detail. Two stylized towers are connected by a wall with open gate. In heraldry, a castle, similar to a tower, often stands for protection and vigilance, but usually symbolizes the castle of the one bearing the coat of arms. This patch is ideally suited to be affixed to shields or banners. The back is equipped with an iron-on adhesive, so the patch can be easily attached before sewing. The carrier material is a stable cotton canvas.
Material: Cotton canvas, polyester
Measurements of the large patchHeight: 26.5cmWidth: 34.5cmWeight: 45g
Measurements of the medium patchHeight: 16cmWidth: 20cmWeight: 17g
Sizes: large & mediumColours: yellow, natural, grey, black
A crown patch in heavy cotton canvas. Use this patch to tune up your shield cover or your costume. The back is made with a fusible, so you can iron it onto your cloth. The fabric can easily be painted - a great possibility to individualize your patch even more. The crown is some 10cm high and app. 17cm wide.
Material: cotton canvas
A crown patch in heavy cotton canvas. Use this patch to tune up your shield cover or your costume. The back is made with a fusible, so you can iron it onto your cloth. The fabric can easily be painted - a great possibility to individualize your patch even more. The crown is some 10cm high and app. 17cm wide.
Material: cotton canvas
A crown patch in heavy cotton canvas. Use this patch to tune up your shield cover or your costume. The back is made with a fusible, so you can iron it onto your cloth. The fabric can easily be painted - a great possibility to individualize your patch even more. The crown is some 10cm high and app. 17cm wide.
Material: cotton canvas
A crown patch in heavy cotton canvas. Use this patch to tune up your shield cover or your costume. The back is made with a fusible, so you can iron it onto your cloth. The fabric can easily be painted - a great possibility to individualize your patch even more. The crown is some 10cm high and app. 17cm wide.
Material: cotton canvas
A crown patch in heavy cotton canvas. Use this patch to tune up your shield cover or your costume. The back is made with a fusible, so you can iron it onto your cloth. The fabric can easily be painted - a great possibility to individualize your patch even more. The crown is some 10cm high and app. 17cm wide.
Material: cotton canvas
Discontinued, only while stocks lastThe sleeveless "Clara" dress is open in the front and closed by a lycing on the chest.
Material: canvasSize: S - XXL
This sheath is made for one single throwing dagger. It is easy to combine with our very own Doran crossbelt.You should always keep a "little helper" hidden somewhere...Material: Split LeatherColour: black, brownAll other \\"Doran\\" systems articles can be found here.
Limited edition, only while stocks last."Hamish" is a simple vest and can be used for many costumes. Seafarers, adventurers, travelling people, but also merchants, villains and landlords cut a dashing figure wearing it. It is closed by means of two button strips, and the cotton belt on the back can be used to adjust the vest's waist fit.The back of the vest is made of satin. Material: canvas (100% cotton), satin (polyester)
Sizes: M-XXXLColour: blue
Discontinued, only while stocks lastThe "Tilly" trousers are cut in the style of the 17th century. They are decorated with lavish buttons and tied 3/4 long beneath the knee.Material: Premium canvasSize: S-XXL
The cotton shirt "Jonathan" differs from the shirt "Ansgar" in the cutaway collar and the button closing the sleeve cuffs. The robust cotton fabric makes this shirt just perfect for hot summer days outside.Material: cotton
The shirt
"Umberto" is made of light linen fabric. It has a reinforced shirt
breast as well as a wide reinforced collar and wide cuffs. It is ideal
to be worn under vests and doublets. A perfect shirt for warm days, not
only for musketeers and pirates. Material: linen fabric (50 % linen, 50 % cotton)
The "Nymrael" dagger is a highly detailed weapon, with engraving covering a good portion of it. Made from the unique Calimacil Foam, it can be used extensively and remain safe for years. Available in several colors, its handle recalls the architectural forms of ancient Greece and the style of art nouveau. This weapon is perfect in the left hand for accompanying a sword or as a ceremonial weapon. With its details and engravings, it will be suitable for all battle-hungry elves or anyone looking for an high-fantasy accessory. Weight (g): 140Total Length (cm): 47,5Blade Length (cm): 31Blade Tickness (cm): 2Handle length (cm): 21,5Material: Fibreglass, Calimacil FoamAll articles of the manufacturer "Calimacil" are handmade in a small manufactory in Canada. We try to keep all items in stock at all times, but unfortunately we may wait up to 10 weeks for items that are out of stock. Disclaimer: All the articles shown here have been specially developed for the safe representation of fights in LARP, on theatre stages or similar. The foam weapons consist of a glass fibre core, which is completely wrapped with soft foam to avoid injury.
The second edition of our popular foam weapons is made out of a new material. It is more tear-resistant than our old foam and absorbs the energy of every hit.The "Rorrik" buckler from the "Battle Standard" line is characterized by high-quality workmanship and a realistic look. Whether as a Viking, robber or other fighter, this shield will serve you well for a long time.Material: GRP, foamSize: 54 cm diameter
Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like live roleplay events, theatre stages etc. The foam weapons are made with a glass fibre reinforced plastic rod as a core, fully encapsulated in soft foam to avoid injuries.
Our leather straps are cut from robust cowhide and are available in many lengths, widths and colours. Build your own belt and decorate it with our many buckles and fittings!Material: upper leather
Lenghts: 135cm & 170cmWidths: 2cm-5cm
A costume consists of a basic and some individual clothing. Both is important. The basic costume sets the path for the individuality and is supposed to be comfortable. The individual equipment, on the other hand, defines the persons characteristics. "Kilian" is a breecher or knickerbocker with pockets and a string just underneath the knee. It is a real alternative to the pants "Kasimir" when worn with knee-high socks. The two tiestrings on waist and knee allow an individual adjustment to the wearers body. It looks great, when combined with riding-boots.Material: canvas (cotton)
€29.90*
Over 25 years of experience
Choose from 5,000+ items
Free shipping from 100€ (DE)
Express-Shipping within 24h (DE)
This website uses cookies to ensure the best experience possible. More information...