The "Ulfric" mincing knife is a real multi talent. Not only does it mince herbs perfectly, but can also be used as a chopping knife and chefs knife as well. It is made from one single piece of steel and has an elaborate swung handle. The blade was sharpened after the forging process and the completely blackened afterwards - the blade keeps its rustic look this way. Being only slightly bent, the knife can be used as a chopping cleaver as well - use it to break bones from your pork chops for example. The blades shape is made along examples of chinese cleavers and well sharpened - you can cut through vegetables and meat without getting stuck or squeezing the goods. This knife combines all the knifes you will need in a camp kitchen - why using more material and extra weight, if this is all you need? We suggest to use Ballistol spray oil regulary on this knife to keep it sealed from oxygen. The food wax oil will not resinify and is a propper way to keep all metal parts ready for use at all times. Material: steel Total length: 16,5 cm Blades length: 13,5 cm Blades width: 6 cm Weight: app. 300 g This knife is a handcrafted decorative item. Its cutting performance and cut quality may differ from industrially manufactured knives. Additionally, its sharpenability may vary.

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Markward" series, this shield is decorated with the typical cut edges on the top. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper of 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals or writings with weatherproof acrylic paint. Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colour: blank, browned

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Gustav" series, this shield is not decorated, but meets the series' style with plain and undecorated beauty. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1.2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colour: blank, browned

The large "Wilhelm" arm shield is thought to be and upgrade to our chainmail shirts. Similar to a belt shield, those add ons can show the groups colours, insignia or heraldry. It is being fixed to the wearers upper arm with a belt and can be fastened to the mails rings by using a leather string. Made from armour steel, it is not only an additional armour plate, but also another nice detail on any existing costume. The shield can also be fastened to any other existing armour and clothing - there is no definite need for a chainmail. A gambeson can also be a good foundation: just sew a leather string to the sleeve and attach the shield there! You will only need some creativity and a little handywork. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. We suggest to order a leather string from our stock: this way you have everything at hand, when starting to built your new upgrade. Material: 1,2 mm steel Length: 27 cm Width: 23 cm Weight: app. 0,5 kg Colours: blank, browned

This small gorget was designed for young heroes and ladies - bigger necks will have difficulties fitting in there.The gorget is being closed with a buckle on the right shoulder and opened on the left one. It is made with a short "turtle neck", having a completly different appearance as any other gorget on the market. There are no fixpoints for spaulders attached on this gorget. Attention: The bump on the lower backside is for ergonomic fitting and NOT a damage. Material: 1.2mm steelColour: blank

The "Hilde" brooch is made of bronze and features a simple, functional design. It is ideal for fastening arm and leg wraps or closing lighter fabrics. Thanks to its understated shape, "Hilde" can be used both as a practical accessory and a decorative element—suitable for a wide range of garments. Material: Bronze Width: approx. 3.2 cm Height: approx. 2.8 cm Pin length: approx. 4 cm All measurements are in centimetres. As our products are handmade, slight variations in size and colour may occur. Colours shown in photographs or on screens may not be accurately represented.

This simple gorget is made to fit our armour series Gustav. You wear it over your breastplate and it has got two buckle straps on both sides to attach the spaulders. Wear it underneath the breast plate to cover your neck and still be able to attach all of the Mytholon range.Material: 1,2mm steelFront length: 23cmTotal length: 29cm