Sigismund burgonet

€95.93*

% €119.90* (19.99% saved) previously €119.90*

Delivery time 2-5 days

Product number: 970088

Our benefits

Free shipping from 50€ (DE) / 150€ (NL,BE,PL+)
Great Quality for low prices
Choose from 5.000+ items

Product information "Sigismund burgonet"

This helmet is built along the historical bouronet from the early 16th century. The head is well protected inside a round scull cap with a high riser in the centre of the spine. The face is covered by the small brim in the front and the two cheek flaps on the sides. Both flaps are punched with a floral pattern aside the ears to allow a better hearing.
The helmet has an enlongened neckpiece, so that the part between cuirass and helmet is closed as well.

The burgonet developed from the sallet in the 16th century and was, just behind the Morion, the most worn helmet in the 16th and 17th century.

Material: 1,2mm steel
Size: up to 62cm circumference
Colour: blank

We recommend to wear a padded coif underneath to avoid scratches and bruises. This will maximize your comfort.

Accessory Items

Ballistol spray

THE universal spray made by the Ballistol company. Can be used for metal, just as well as leather and various other materials. A well known care product for animals paws and fur; a true allrounder, completly untoxic. We advise it for metal armour care and protection of leather armours.The practical 50ml spray can for your journeys, or the large 200ml spray can for your home.Please read the containers warnings section.Can not be exported outside the EU due to EU-law.

€3.90*

Details

Customers also viewed

Edward full arm guard Discontinued

Discontinued, only while stocks last The full armguard from the "Edward" series is big enough to be worn on top of a gambeson and even the padded jacket with an additional chain mail.The upper part is being fixed to the spaulders on the inner side. The arm guard itself is then fitted to the wearers arm by the straps and buckles on upper arm, elbow and forearm.The inner elbow is being protected by the "shell", as the plate piece on the outside of the guard is called. The forearm is closed inside a two-piece pipe - you will not need any bracers in addition to this piece here.Material: 1.2mm steelColours: blank, browned with blank edges lenght54upper width48lower width33 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

€64.95* €129.90* (50% saved)

Berthold sallet

This helmet shows a high, pointed scull piece with an enlongened neck protection. The part on the forehead is riveted to the helmet and provides an additional protection to the wearer. The scull part is made with a spine.The visor can be moved upwards to allow a better breathing for the wearer in between battle moments.The helmet is made with an inner inlay of foam (covered in cotton) and has a chin strap attached.The sallet is a very common helmet type for the late medieval period and was often worn in combination with gotic armourment. It was used later as well, especially by bandits and sellswords, who scavaged them off the battlefield.Material: 1,2mm steelSize: up to 62cm circumferenceColour: blankWe recommend to wear a padded coif underneath to avoid scratches and bruises. This will maximize your comfort.

€95.93* €119.90* (19.99% saved)
previously €119.90*

Einar viking helmet

This helmet is made with a round scull cap and finished with a protector for the eyes. The cap itself is decorated with two metal bands crosswise and another along the bottom edge.The "Brillenhelmet" is mostly found with nothern people of the germanic tribes and can be used in reenacting vikings.Material: 1,2mm steelSize: up to 62cm circumferenceColour: blankWe recommend to wear a padded coif underneath to avoid scratches and bruises. This will maximize your comfort.

€63.91* €79.90* (20.01% saved)
previously €79.90*

Franz open sallet

The sallet is the successor of the kettle helmet in europe and one of the most common helmet types in 15th century in the western hemisphere. There is types with visor and without, often with a segmented neck protection, but mostly with a stiff one.The "Franz" sallet is built without visor, so it does not cover the face and keeps it open for the wearer to breath free and a better vision.The edge along the face, and following, the complete lower edge, is corrugated. The centre ridge is built very low to keep the silhuette rounded. This helmet is equipped with a cotton covered foam inlay and has a leather chin strap.Material: 1,2mm steelColour: blankSIze: up to 62cm circumferenceWe recommend to wear a padded coif underneath to avoid scratches and bruises. This will maximize your comfort.

€63.91* €79.90* (20.01% saved)
previously €79.90*

Konrad kettle helmet

The kettle helmet is the stereotype of the english footman of the late medieval and early modern age.The wide brim, round scull cap and riveted band along bottom and middle of cap will make any groups concept look uniformed.Material: 1,2mm steelSize: up to size 62Colour: blankWe recommend to wear a padded coif underneath to avoid scratches and bruises. This will maximize your comfort.

€63.91* €79.90* (20.01% saved)
previously €79.90*

Customers also bought

Doran ring belt

European belt buckles have been dated back to the Roman Empire. Prior to the buckle the roman and germanic people used a ring, made from various materials. This shape of buckle was used until the medieval period. The "Doran" series' ring belt copies this shape of buckle. The belt is made from split leather and grades almost every costume up, as the characteristic medieval knot shows the wearer linked to this period. The belt is tightened by pulling the strap through the ring a little more, than needed and securing it right behind it. The upper end is pulled through the loop then and lead to to the bottom - simple as it sounds: this is it! The knot is tightened and stays in place now. We advice to use leather fat on a regulat basis for the caretaking of split leather. Our "Gold Quality" leather fat will certainly be the best choice. Material: split leather Length: 140 cm Width: 4 cm Colour: black, brown Weight: app. 170 g

€21.90*

Bastian shirt cotton cream

Being made from light cotton and sewn in historical patterns, the shirt "Bastian" is perfectly suitable for warm days. Wear it as the first layer on top of your skin - cotton soaks up humidity very well. The cut is wide and is therefore suitable for hot and sunny days. The collar is adorned with quillings and has a lace tying just below.The wide cut sleeves are being closed just below the wrist and add a casual style to the shirt.When worn with a simple belt and a belt bag, this shirt will service as a basic costume already. The shown belt is not included in this offer. We invite you to browse our stock to find the matching pieces for your needs.Material: 100% cottonSizes: S - XXL

Variants from €26.18*

€34.90*

Arthur padded vest

The padded vest "Arthur" is backstitched in diamond-shape and closed by four buckle-straps in the front. The sleeves and the seam on the bottom is riveted with brass eyelets, which allows the tassets and the sleeves to be combined with the jacket.The diamond-shaped backstitching povides an extra in movability and, at the same time, keeps up the padding, which avoids bruises and scratches. The collar is backstitched in smaller diamonds: this brings more comfort to the neckarea. Material: 100% cotton, polyester SMLXLXXLXXXLChest circumference114114124128144160Waist circumference110110120124142156Hip circumference116116124134146172Lenght646466,5697070 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

€55.92* €69.90* (20% saved)
previously €69.90*

Only 3 available

Rafael chaperon canvas black

The "Rafael" chaperon is cut like one of the most common medieval headdresses, worn by women as well as by men. It proceeded the gugel that was rolled, worn on the head with the tip of the hood led below the chin and fixed on the other side. Later on it was directly cut as a chaperon.Material: Canvas (100% cotton)

€19.90*