Fafnir padded bracers
Información sobre el producto "Fafnir padded bracers"
Accessory Items
THE universal spray made by the Ballistol company. Can be used for metal, just as well as leather and various other materials. A well known care product for animals paws and fur; a true allrounder, completly untoxic. We advise it for metal armour care and protection of leather armours.The practical 50ml spray can for your journeys, or the large 200ml spray can for your home.Please read the containers warnings section.Can not be exported outside the EU due to EU-law.
Los clientes también vieron
The "Fafnir" greaves consist of three solid riveted segments. A lower foot protection, which, thanks to the generous, padding, allows the greaves to be comfortably worn down to the boots, an extra padded segment for the knees and the actual protection for the shin. With their curved lines and wide beading, the greaves look sleek and elegant, with maximum protection. Due to the overlapping segments, they are very stable and do not deform even in the case of heavy duty. Like all the armour of the "Fafnir" series, these greves are equipped with padded suede upholstery. This increases the wearing comfort considerably and also protects knees and feet. They are closed with sturdy leather straps and roll buckles on the back. Armours of the "Fafnir" series are not only for characters with "Nordic" background a decent protection. Adventurers, knights, soldiers and many other armour wearers also benefit from their good protective effect and maximum wearing comfort. Material: 1,2 mm steel, suede, polyester Length 53 cm Weight 2.7 kg
The Armour Skirt "Tenebra" completes our Armour Jacket:The skirt is made in the same style like the vesting. The upper layer consists of suede leather, which was backstitched on a cotton lining.All that offers a good protection to the wearer. The stripes hang down on the thighs like a skirt does. The two buckles and the tie-holes, together with the included strings, allow this skirt to be closed in the back of the weares body individually.Material: Suede and CottonMeasurements: 50 x 109 cmLeather is a product of nature and may take dyes differently. The actual hue may differ from the image.
Our "Fafnir" body armour is something really special. Metal plates have been riveted on a backing of padded suede. Especially the comfort of the wearer and the feasibility of putting on a complete suit of armour in a few minutes were our goals. Because of this there is no need to wear a gambeson or a similar garment.You have the choice between three different adjustments which you can make yourselves. The different parts of the armour are connected by leather straps. The three different sizes are achieved by pulling these straps through eyelets. Additionally, you can omit some parts of the armour, eg. the shoulder parts or the thigh protectors.In our opinion, the browned version of the "Fafnir" armour is specially suited to be used as armour for dark and evil NPCs, because they won`t need much time to arm themselves. Material: Suede, Leather, SteelLength: 96-107 cmBreast circ.: 104-114 cmShoulder width: 52 cmArm length: 27 cmWeight: ~12kgLeather is a product of nature and may take dyes differently. The actual hue may differ from the image.
A padded leather vest in backstitched suede appearance. It is closed with four buckles in the front and additionally can be adjusted to the wearers body individually by using the strings on the sides and shoulder.Suitable for light armoured warriors and for those, who want to equit their adventurers additionally.This vest looks best, when combined with one of our padded jackets and/or a shirt of chainmaille.Material: Suede (outside), Cotton (lining), BucklesLength: 59 - 63 cmCircumference: 99 - 129 cmadjustable Leather is a natural product and absorbs dyes differently. In addition, our products are handmade. Colors and dimensions may therefore vary slightly. Photographic representation and display settings may affect color reproduction.
The bracers "Fafnir" consist of three fixed riveted segments. A wrist guard, an extra padded segment to protect the elbow and the actual bracers. With their curved lines and the wide beading, the bracers look sleek and elegant, with maximum protection. Due to the overlapping segments, they are very stable and do not deform even in the case of heavy duty. Like all the armor of the "Fafnir" series, these bracers are also equipped with padded suede upholstery. This increases the wearing comfort considerably and also protects against bruises. They are closed with sturdy leather straps and roll buckles on the back. Armours of the "Fafnir" series are not only for characters with "Nordic" background a decent protection. Adventurers, knights, soldiers and many other armour wearers also benefit from their good protective effect and maximum wearing comfort. Material: 1,2 mm steel, suede, polyester Length 33 cm Weight 1.7 kg
Clientes que también compraron
The "Fafnir" greaves consist of three solid riveted segments. A lower foot protection, which, thanks to the generous, padding, allows the greaves to be comfortably worn down to the boots, an extra padded segment for the knees and the actual protection for the shin. With their curved lines and wide beading, the greaves look sleek and elegant, with maximum protection. Due to the overlapping segments, they are very stable and do not deform even in the case of heavy duty. Like all the armour of the "Fafnir" series, these greves are equipped with padded suede upholstery. This increases the wearing comfort considerably and also protects knees and feet. They are closed with sturdy leather straps and roll buckles on the back. Armours of the "Fafnir" series are not only for characters with "Nordic" background a decent protection. Adventurers, knights, soldiers and many other armour wearers also benefit from their good protective effect and maximum wearing comfort. Material: 1,2 mm steel, suede, polyester Length 53 cm Weight 2.7 kg
The helmet Kaldor matches our series Edward perfectly. Same as the helmet Edward its design is based on historical great helmets, but with different shaped eye slits. The front is separately accentuated in this helmet and the top part is adorned with four decorative plates like a crown. On the back it has got a felixble plate that covers the back of the head. Material: Steel 1,2mmColour: blank, browned with blank areas
The small pauldrons of the “Markward” series feature a long upper arm segment that is flexibly connected to the two-part shoulder segment. The articulated design is not merely a visual detail but also adds additional stability to the construction. In addition to their excellent price-performance ratio, the small “Markward” pauldrons stand out for their slim cut and compact build. This makes them equally suitable for complementing both light and heavy armour. Naturally, these pauldrons are compatible with all Mytholon gorgets. Material: 1.2 mm steelLength: 32 cmWidest arm circumference: 56 cmTightest arm circumference: 34,5 cmWeight 1.65 kgColour: blank, browned
This half-long cape with hood offers the right mix of movability and warmth. It is shorter in the front, so that action and fun are not interfered with. The woolen variation keeps the upper body really warm. The hood protects really well against rain and cold.The cape is closed with a button in the front."Kim" is available in cotton and in wool.Most of our hobbys conventions take place outside - thats why weatherproof equipment is essential. Capes and coats have established and simply belong to everyones clothing.UnisizeMaterial: 100% CottonColours: brown, green and blackMeasurements: Front (to bottom): 75cmBack (to bottom): 100cmCanvas is a tough fabric made from 100 % Cotton and looks very natural. HINT: You can easily waterproof this cape by using the normal cloth-waterproof from your shop. This way the fabric can withstand some rain.
This half-long cape with hood offers the right mix of movability and warmth. It is shorter in the front, so that action and fun are not interfered with. The woolen variation keeps the upper body really warm. The hood protects really well against rain and cold.The cape is closed with a button in the front."Kim" is available in cotton and in wool.Most of our hobbys conventions take place outside - thats why weatherproof equipment is essential. Capes and coats have established and simply belong to everyones clothing.UnisizeMaterial: 100% CottonColours: brown, green and blackMeasurements: Front (to bottom): 75cmBack (to bottom): 100cmCanvas is a tough fabric made from 100 % Cotton and looks very natural. HINT: You can easily waterproof this cape by using the normal cloth-waterproof from your shop. This way the fabric can withstand some rain.