Schleswig belt set

3,90 €*

Prezzi incl. IVA più costi di spedizione

Tempi di consegna 2-5 giorni

Codice prodotto: 960205

I nostri vantaggi

Spedizione gratuita a partire da 150€ (IT+)
Oltre 25 anni di esperienza
Scegli tra più di 5.000 articoli

Info sui prodotti "Schleswig belt set"

The two-piece belt set "Schleswig" consists of a belt tongue and a long buckle. Made of brass and cast by hand, it is inspired by belt decorations of the Vikings.

Suitable for belts from 1 cm to 1,5 cm wide

Material: brass
tongue dimensions: 1,3 cm x 6, 3 cm
Dimensions of the buckle: 2 cm x 7 cm

I clienti hanno visto anche

Sinold strap end with cross

Based on high medieval models and cast from fine bronze, the belt tongue "Sinold" adorns straps with a width of 3 cm. Pins for riveting are not included, you can find them under the accessories. Material: Bronze length: 7,7 cm width: 3 cm

3,89 €*

Novgorod belt set

The two-piece belt set "Novgorod" consists of a belt tongue and a buckle. Made of brass and cast by hand, they are inspired by Viking-Age belt decorations. Suitable for belt widths from 1 to 2cmThis fitting has no pre-drilled holes, so you can decide where you need them. Just use a small metal drill to make them for your DIY project. Material: brasstongue dimensions: 1.5cm x 4.5cmbuckle dimensions: 2.5cm x 5.5cm

3,90 €*

Danika buckle

A finely cast brass buckle. Ideal for closing narrow belts and straps. Suitable for belts up to 1,3 cm wide. Material: brass dimensions: 3,3 cm x 2,2 cm

1,50 €*

Lunula pendant

"Lunula" pendants were widespread in the Roman Empire. These "Little Moons" were lucky charms and were worn especially by women and children. This replica is cast out of brass and can be worn with a thin leather strap or chain around the neck. Material: brass dimensions 3,7 cm x 1,8 cm A leather strap or chain is not included.

1,50 €*

I clienti hanno acquistato anche

Halfson strap end braided

Cast from fine bronze and carefully polished, the strap end "Halsfon" retains its original early medieval look. Suitable for all belts with a width of 1.5 cm to 2 cm. Pins for riveting are not included, but you can find them under accessories. It may be necessary to adjust the holes in the belt tongue slightly. Material: Bronze length 7,5 cm width 1,5 cm

1,89 €*

Gotland belt set

The two-piece "Gotland" belt set consists of a tongue and a buckle. Both parts are cast by hand and are based on finds from the Viking Age. Suitable for belts up to 2.5cm wide Material: brassdimensions of the tongue: 2.1cm x 6.9cmDimensions of the buckle: 3.1cm x 5cm

5,90 €*

Tinne brass pins 8 pcs.

With "Tinne" you get 8 brass nails - 1.6 mm round head pins made of solid brass MS-64 with a share of 64% copper and 36% zinc. Pins made of this alloy are very easy to shape when riveting and are thus ideal for attaching historic and fantastic fittings in medieval reenactment and LARP.Dimensions: 1.6 mm x 13 mm.Fix fittings and decorations with brass nails, how does that work?The fitting or decoration to be fastened is placed on the belt or pocket. Mark the required 2 mm holes in the desired places and punch the leather with an eel. Of course, using a pair of punch pliers is also possible, but the hole must not be too large then, because the leather is punched out and, as with the use of eels, can not contract again around the rivet. The head of the pin should of course be on the side that is visible later, the so-called "show side". Depending on the thickness of the material, shorten the brass pin on the pointed side to 1.5 mm - 2 mm and tap it in circular strokes with the smallest possible round hammer, so that a slightly arched head is formed and the fitting is solidly connected to the backing material. For smoothing a sandpaper with 600er Körning is recommended. For a better grip, you can also use a small washer, but the riveting is then not so medieval.Have fun crafting!

0,49 €*

Camicia Alex

La camicia Alex si distingue per gli incroci di lacci lungo le maniche, è disponibile con gli occhielli in metallo o le asole cucite. Il tipico colletto e le stringhe lo rendono il capo medievale per eccellenza.Materiale: cotoneTaglie: dalla S alla XXL

49,90 €*

Lyra fibula

Questa graziosa fibula viene utilizzato come chiusura per mantelli, ma può anche essere utilizzata come semplice decorazione. È realizzata in robusto ferro battuto e quindi adatta anche a tessuti leggermente più spessi come la lana. Materiale: ferro battuto Diametro perone piccolo: 8 cm Diametro perone grande: 10 cm

Varianti da 12,50 €*

15,90 €*