Gareth Bastardsword 2nd Ed.

59,90 €*

Prezzi incl. IVA più costi di spedizione

Articolo attualmente non disponibile - In produzione

Colore

Codice prodotto: 962916

I nostri vantaggi

Spedizione gratuita a partire da 150€ (IT+)
Oltre 25 anni di esperienza
Scegli tra più di 5.000 articoli

Info sui prodotti "Gareth Bastardsword 2nd Ed."

The "Gareth" bastard sword from our Battle Standard line of products can be wielded with one or two hands.

Material: Foam, GRP
Total length: 112 cm
Blade length: 82 cm
Width: 25 cm
Colours: Gold, steel

Please note: Battle Standard products may have a hole on the flat of the blade near the point. This hole is created during production, a technical necessity in order to stabilize the core rod while the weapon is filled with foam. Moreover, further small holes may be present on the surface in other places. These holes are not to be understood as flaws and do not affect the foam weapon’s safe.

Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like live roleplay events, theatre stages etc. The foam weapons are made with a glass fibre reinforced plastic rod as a core, fully encapsulated in soft foam to avoid injuries.

I clienti hanno visto anche

Fidas longsword 2nd Ed.

The second edition of our popular foam weapons is made out of a new material. It is more tear-resistant than our old foam and absorbs the energy of every hit. Moreover, we updated the handle wraps so that you can wield your weapon with a good grip and accuracy even in a heated battle.The design of the "Fidas" short sword of the Battle-Standard series was inspired by the old Adventurers series by Hammerkunst. Its slender, fullered blade and short guard are fitting for many different characters."Battle Standard" foam weapons are made without latex, and are therefore not subject to "latex cancer". Still, it is recommended to care for them with silicone oil to increase the durability of the protective coating.Material: Foam, GRPLength: 93 cmBlade: 75 cmPlease note: Battle Standard products may have a hole on the flat of the blade near the point. This hole is created during production, a technical necessity in order to stabilize the core rod while the weapon is filled with foam. Moreover, further small holes may be present on the surface in other places. These holes are not to be understood as flaws and do not affect the foam weapon’s safety.Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like live roleplay events, theatre stages etc. The foam weapons are made with a glass fibre reinforced plastic rod as a core, fully encapsulated in soft foam to avoid injuries.

44,90 €*

Hektor longsword 2nd Edition

The second edition of our popular foam weapons is made out of a new material. It is more tear-resistant than our old foam and absorbs the energy of every hit. Moreover, we updated the handle wraps so that you can wield your weapon with a good grip and accuracy even in a heated battle.The "Hektor" longsword from our Battle-Standard series is designed as a classical knight's sword. The straight crossguard and the unusual pommel make it stand out from other swords. The exceptional craftmanship combines durability with a realistic look, so it will serve you for a long time. The leather hilt wrapping guarantees a good grip even in the thick of battle.Material: Foam, GRP, leatherLength: 103 cmPlease note: Battle Standard products may have a hole on the flat of the blade near the point. This hole is created during production, a technical necessity in order to stabilize the core rod while the weapon is filled with foam. Moreover, further small holes may be present on the surface in other places. These holes are not to be understood as flaws and do not affect the foam weapon’s safety.Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like live roleplay events, theatre stages etc. The foam weapons are made with a glass fibre reinforced plastic rod as a core, fully encapsulated in soft foam to avoid injuries.

49,90 €*

Severian sword 2nd Ed.

The second edition of our popular foam weapons is made out of a new material. It is more tear-resistant than our old foam and absorbs the energy of every hit. Moreover, we updated the handle wraps so that you can wield your weapon with a good grip and accuracy even in a heated battle.The "Severian" sword from the Battle-Standard series is designed as a classical fighters sword from medieval times. With its straight and long guard and the wide blade, it fits many characters. "Battle Standard" foam weapons are made without latex, and are therefore not subject to "latex cancer". Still, it is recommended to care for them with silicone oil to increase the durability of the protective coating.Material: Foam, grp, leatherLength: 102 cmPlease note: Battle Standard products may have a hole on the flat of the blade near the point. This hole is created during production, a technical necessity in order to stabilize the core rod while the weapon is filled with foam. Moreover, further small holes may be present on the surface in other places. These holes are not to be understood as flaws and do not affect the foam weapon’s safety.Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like live roleplay events, theatre stages etc. The foam weapons are made with a glass fibre reinforced plastic rod as a core, fully encapsulated in soft foam to avoid injuries.

39,90 €*

I clienti hanno acquistato anche

Doran sword loop large black left-handed Discontinued

Discontinued item, only while stocks lastThe big swordloop allows big swords and axes to be carried at your belt. It is especially eligible for HK longswords, just like for any other swords from our stock.Material: split leatherWidth: 8,5 cmLength: 18,5 cm

1,99 €* 6,90 €* (71.16% risparmio)

Griffin shortsword 2nd Ed.

The second edition of our popular foam weapons is made out of a new material. It is more tear-resistant than our old foam and absorbs the energy of every hit. Moreover, we updated the handle wraps so that you can wield your weapon with a good grip and accuracy even in a heated battle.The "Griffin" short sword from the "Battle Standard" series is modelled on a cutlass. The tip of the single-edged blade is located somewhat higher than the central line, which gives this typical cutting weapon its unique shape. Pommel and crossguard are boldly curved and lend this sword a dynamic air. This foam weapon is not only for pirates. It may also be a loyal companion for oriental-inspired characters, elves, rogues, and basically all characters unwilling or unable to wield a double-edged sword.On account of its compact size, this foram weapon is also ideally suited for the next generation of heroes.Material: Foam, GRPTotal length: 71 cmBlade length: 54 cmWidth: 12 cmPlease note: Battle Standard products may have a hole on the flat of the blade near the point. This hole is created during production, a technical necessity in order to stabilize the core rod while the weapon is filled with foam. Moreover, further small holes may be present on the surface in other places. These holes are not to be understood as flaws and do not affect the foam weapon’s safety.Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like live roleplay events, theatre stages etc. The foam weapons are made with a glass fibre reinforced plastic rod as a core, fully encapsulated in soft foam to avoid injuries.

29,90 €*

Suggerimento

Brandon Tabarda

La tabarda "Brandon" è realizzata in morbida pelle scamosciata. Con le sue cuciture strette a forma di diamante e la fodera leggera, è ideale da indossare sotto l'armatura senza limitare la mobilità. Funziona egregiamente come indumento superiore indipendente. Il comfort di indossare un'armatura è notevolmente migliorato e chi la indossa è efficacemente protetto dai lividi che ci si può procurare in combattimento. La tabarda "Brandon", con la sua lunghezza dal petto al ginocchio, è inoltre rinforzata per soddisfare l'esigenza di indossare una corazza o una cotta di maglia. Gli spallacci dell'armatura sono comodamente imbottite dalle spalle svasate della tabarda. Ciò evita lo sfregamento delle cinghie sulla pelle o sui punti di pressione. Con l'allacciatura laterale, "Brandon" può essere adattato individualmente alla forma del corpo. Questa tabarda è una base eccellente per molte idee di costume e non solo per ruoli in armatura. Materiale: pelle scamosciata, cotone, poliestereIl cuoio è un prodotto naturale e durante il processo di colorazione può leggermente variare di tonalità.

199,90 €*