Arnulf bolt quiver canvas brown

La migliore armatura a piastre non vale nulla, se chi la indossa non può muoversi. Spesso è necessario trovare un compromesso tra imbottitura e mobilità. Il gambeson "Tudor" del tardo Medioevo è stato appositamente progettato per essere indossato sotto un'armatura d'acciaio. In questo modo il gambeson protegge chi lo indossa da segni di pressione e colpi degli avversari, pur non limitando la mobilità. Le braccia non sono imbottite, ma hanno uno spesso doppio strato di canvas. Ciò non limita i movimenti e protegge le braccia dalle escoriazioni dovute alle parti di armatura sopra di esse. Fori aggiuntivi consentono il fissaggio di parti di armature leggere, come lo scudetto per il braccio "Wilhelm". I lacci con puntali sono usati per chiudere questo gambeson nella parte anteriore. Naturalmente questo gambeson può essere indossato separatamente, senza alcuna forma di armatura al di sopra di esso. I fori aggiuntivi consentono varie possibilità di personalizzare questo gambeson per le esigenze e le richieste di chi lo indossa. Materiale: canvas, poliestere

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Adam" series, this shield is decorated with the series' typical ridge along the edge. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g 

The "Jetta" hooded top by Falkenwacht is made of soft leather and trimmed with rabbit fur. It is tied crosswise with two straps and tied as desired in front or behind the body. The generous hood protects against wind and weather. "Jetta" is a practical and beautiful outer garment for many costumes and occasions. All articles of the Leipzig manufactory "Falkenwacht" are 100 % made in Germany. The skins come from certified breeders in Europe or are taken from the wild. No skins from factory farming are used. Material: leather, real rabbit furSizes: XS/S, M, L/XL, XXL Leather and real fur are a natural products. Colours may vary.

A replacement stirrup lock for the crossbows "Bernardo" and "Sicuro" from our range (not suitable for "Bernardo" double or pistol crossbow). It fixes the stirrup to the crossbow while simultaneously holding the bow in place. Just like the crossbows itself, this replacement stirrup lock is handcrafted in the Italian manufactory Fucina del Drago and is a piece of masterful craftsmanship.Material: steelLength: approx. 5cmWidth: approx. 1cm