Korbin belt badge red/cream

4,90 €*

Prezzi incl. IVA più costi di spedizione

Articolo attualmente non disponibile - In produzione

Colore

Variazione

Incastro

Scudo

Tridente

Codice prodotto: 960250

I nostri vantaggi

Spedizione gratuita a partire da 150€ (IT+)
Oltre 25 anni di esperienza
Scegli tra più di 5.000 articoli

Info sui prodotti "Korbin belt badge red/cream"

The "Korbin" belt badges in different shapes are ideal for presenting your coat of arms colors with them. They can be additionally decorated with our patches or fabric paints.

Material: cotton
Length: 35 cm
Width: 12.5 cm

I clienti hanno visto anche

Korbin belt badge green/black

The "Korbin" belt badges in different shapes are ideal for presenting your coat of arms colors with them. They can be additionally decorated with our patches or fabric paints. Material: cottonLength: 35 cmWidth: 12.5 cm

4,90 €*

Solo 5 disponibile

Korbin belt badge green/cream

4,90 €*

I clienti hanno acquistato anche

Solo 1 disponibile

Korbin belt badge red/cream

4,90 €*

Stendardo in Canvas

Questo stendardo di guerra è realizzato in canvas. I colori sono applicati squadrati e corrispondono a disegni storici. Ti consigliamo di ricamare lo stendardo con il tuo stemma o di decorarlo con la nostra gamma di toppe. Materiale: cotone pesante Lunghezza: 160 cm, larghezza: 75 cm, max. diametro passanti: 8 cm Consegnato senza montaggio

Varianti da 18,67 €*

24,89 €*

Abito Jasione

Abito femminile regolabile anteriormente e posteriormente con lacci in cotone. Materiale: canvasTaglie: S-XL

69,90 €*

Tinne brass pins 8 pcs.

With "Tinne" you get 8 brass nails - 1.6 mm round head pins made of solid brass MS-64 with a share of 64% copper and 36% zinc. Pins made of this alloy are very easy to shape when riveting and are thus ideal for attaching historic and fantastic fittings in medieval reenactment and LARP.Dimensions: 1.6 mm x 13 mm.Fix fittings and decorations with brass nails, how does that work?The fitting or decoration to be fastened is placed on the belt or pocket. Mark the required 2 mm holes in the desired places and punch the leather with an eel. Of course, using a pair of punch pliers is also possible, but the hole must not be too large then, because the leather is punched out and, as with the use of eels, can not contract again around the rivet. The head of the pin should of course be on the side that is visible later, the so-called "show side". Depending on the thickness of the material, shorten the brass pin on the pointed side to 1.5 mm - 2 mm and tap it in circular strokes with the smallest possible round hammer, so that a slightly arched head is formed and the fitting is solidly connected to the backing material. For smoothing a sandpaper with 600er Körning is recommended. For a better grip, you can also use a small washer, but the riveting is then not so medieval.Have fun crafting!

0,49 €*