Balthasar belt shield

14,90 €*

Precios con IVA incluido, más gastos de envío

Tiempo de entrega 2-5 días

Color

Product group

plate armor

Número de producto: 971106

Nuestras ventajas

Envío gratuito a partir de 150€ (ES+)
Más de 25 años de experiencia
Elija entre más de 5.000 artículos

Información sobre el producto "Balthasar belt shield"

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now.

Matching the "Balthasar" series, this shield is decorated with rivets and a beading along the edge. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place.

Talking of creativity: We suggest to clean the shield with Acetone prior to üainting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint.

Material: 1.2 mm steel
Length: 24 cm
Width: 18 cm
Weight: app. 350 g
Colours: blank, browned

Accessory Items

Ballistol spray

THE universal spray made by the Ballistol company. Can be used for metal, just as well as leather and various other materials. A well known care product for animals paws and fur; a true allrounder, completly untoxic. We advise it for metal armour care and protection of leather armours.The practical 50ml spray can for your journeys, or the large 200ml spray can for your home.Please read the containers warnings section.Can not be exported outside the EU due to EU-law.

3,90 €*

Detalles

Los clientes también vieron

Gustav belt shield

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Gustav" series, this shield is not decorated, but meets the series' style with plain and undecorated beauty. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1.2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colour: blank, browned

Variantes de 9,52 €*

10,32 €* 12,90 €* (ahorro del 20%)

Wilhelm armshield large

The large "Wilhelm" arm shield is thought to be and upgrade to our chainmail shirts. Similar to a belt shield, those add ons can show the groups colours, insignia or heraldry. It is being fixed to the wearers upper arm with a belt and can be fastened to the mails rings by using a leather string. Made from armour steel, it is not only an additional armour plate, but also another nice detail on any existing costume. The shield can also be fastened to any other existing armour and clothing - there is no definite need for a chainmail. A gambeson can also be a good foundation: just sew a leather string to the sleeve and attach the shield there! You will only need some creativity and a little handywork. Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. We suggest to order a leather string from our stock: this way you have everything at hand, when starting to built your new upgrade. Material: 1,2 mm steel Length: 27 cm Width: 23 cm Weight: app. 0,5 kg Colours: blank, browned

Variantes de 11,11 €*

11,92 €* 14,90 €* (ahorro del 20%)
anteriormente 14,90 €*

Bron hood suede

The "Bron" Hood is a functionall addition to any upper garment. Made of soft suede, it is cut short, not as warm as a gugel and yet reliably protects against wind and light rain. Material: suedeCircumference neck: app. 60 cmLength: 45 cmWeight: app. 150 gColours: black, brown

39,90 €*

Simon shirt

The "Simon" shirt made from light cotton is characterised by a light stand-up collar with lacing, as well as special sleeves that can be perfectly adjusted to the wearer by tying them at 3 points. Material: 100 % CottonSizeLengthChest circumferenceSleeve lengthShoulder widthS741366942M771467245L781487447XL821527649XXL871568356All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

34,90 €*

Balthasar belt shield

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Balthasar" series, this shield is decorated with rivets and a beading along the edge. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like our arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to üainting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1.2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g Colours: blank, browned

13,90 €*

Clientes que también compraron

Yrsa pendant with runes

A rustic talisman of the Vikings, a so called "Oegishjalmr" from rustic cast brass. Diameter 3.9 cm

1,50 €*

Solo 2 disponible

Mina chestplate

A delicate piece of armour for women.The straps for the shoulders and breast parts are attached to a small shield in the back. This way it fits tightly and is also adjustable in size. The cups were made in "B" size, so this armour is made for slim women only.The armour is framed by a deepening with decorative rivets.This element allows several Mytholon plate armours to match with the "Mina" series.Material: 1.2mm steelColour: blank, browned

99,90 €*

Lucas belt shield

Our belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. This belt shield was, just like the entire "Lucas" series, built with a corrugation along the edge. It is worn on the belt, which is pulled through the two leather belt loops on the top. Naturally it can be worn as a small tasset on the thigh. The belt shields are, just like our arm shields, ideal to be painted, modded and combined with existing costume parts. This is, where your creativity and immagination comes into place. Talking of creativity: We suggest to clean the shield with Acetone prior to üainting it. Afterwards just sand it with a paper with 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint. Material: 1,2 mm steel Length: 24 cm Width: 18 cm Weight: app. 350 g

Variantes de 11,90 €*

12,90 €*