Tenebra armour vest
Tenebra armour vest
179,90 €
- Más de 25 años de experiencia
- Elija entre más de 5.000 artículos
Información sobre el producto "Tenebra armour vest"
A padded leather vest in backstitched suede appearance. It is closed with four buckles in the front and additionally can be adjusted to the wearers body individually by using the strings on the sides and shoulder.
Suitable for light armoured warriors and for those, who want to equit their adventurers additionally.
This vest looks best, when combined with one of our padded jackets and/or a shirt of chainmaille.
Material: Suede (outside), Cotton (lining), Buckles
Length: 59 - 63 cm
Circumference: 99 - 129 cm
adjustable
Los clientes también vieron
The Armour Skirt "Tenebra" completes our Armour Jacket:The skirt is made in the same style like the vesting. The upper layer consists of suede leather, which was backstitched on a cotton lining.All that offers a good protection to the wearer. The stripes hang down on the thighs like a skirt does. The two buckles and the tie-holes, together with the included strings, allow this skirt to be closed in the back of the weares body individually.Material: Suede and CottonMeasurements: 50 x 109 cmLeather is a product of nature and may take dyes differently. The actual hue may differ from the image.
Our "Fafnir" body armour is something really special. Metal plates have been riveted on a backing of padded suede. Especially the comfort of the wearer and the feasibility of putting on a complete suit of armour in a few minutes were our goals. Because of this there is no need to wear a gambeson or a similar garment.You have the choice between three different adjustments which you can make yourselves. The different parts of the armour are connected by leather straps. The three different sizes are achieved by pulling these straps through eyelets. Additionally, you can omit some parts of the armour, eg. the shoulder parts or the thigh protectors.In our opinion, the browned version of the "Fafnir" armour is specially suited to be used as armour for dark and evil NPCs, because they won`t need much time to arm themselves. Material: Suede, Leather, SteelLength: 96-107 cmBreast circ.: 104-114 cmShoulder width: 52 cmArm length: 27 cmWeight: ~12kgLeather is a product of nature and may take dyes differently. The actual hue may differ from the image.
The classical LRP arrow from IDV in Germany. The flattop head is designed for shorter distances therefore it is called LD ( = low distance) arrow. The glassfibre shaft is 30" / ~76cm long. The undetachable fletching is made of highly elastical Polymer. Colour of the fletching: black, blue, green, purple, cream/noctilucent Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like liveroleplay events etc.. All arrows & bolts have padded heads made of foam and pressure distributors made of plastic to avoid injuries, and are made to be shot from larp weapons with limited power.
The "Fafnir" greaves consist of three solid riveted segments. A lower foot protection, which, thanks to the generous, padding, allows the greaves to be comfortably worn down to the boots, an extra padded segment for the knees and the actual protection for the shin. With their curved lines and wide beading, the greaves look sleek and elegant, with maximum protection. Due to the overlapping segments, they are very stable and do not deform even in the case of heavy duty. Like all the armour of the "Fafnir" series, these greves are equipped with padded suede upholstery. This increases the wearing comfort considerably and also protects knees and feet. They are closed with sturdy leather straps and roll buckles on the back. Armours of the "Fafnir" series are not only for characters with "Nordic" background a decent protection. Adventurers, knights, soldiers and many other armour wearers also benefit from their good protective effect and maximum wearing comfort. Material: 1,2 mm steel, suede, polyester Length 53 cm Weight 2.7 kg
Clientes que también compraron
The "Balthasar" gorget is a very stylish piece of armour. Elegant lines and decorative rivets along its edges, make it stand out of the mass.This gorget can also be combined with all other Mytholon spaulders. To make them look their best we recommend combining them with other "Balthasar" armour parts.There are two different "Balthasar" gorgets. We recommend the smaller size for the leaner necks of ladies and adolescents. We recommend the larger size for gentlemen.Small: Length front part: 23cmTotal width: 29cmLarge:Length front part: 29cmTotal width: 36cm Material: 1,2mm SteelColours: blank, brownedYou can find all our "Balthasar" series products here.Maybe take a look at our Padded Jackets to wear them underneath your Armour. This maximizes the comfort wearing it.
The intricately designed longsword "Chatillion" is especially suitable for knights, nobility, and wealthy characters. Its finely molded details and the convincingly realistic leather grip not only give this foam weapon an impressive appearance but also make it a true piece of jewellery, perfect for both historical and fantasy settings. Our Hammerkunst LARP foam weapons combine high-tech innovation with traditional craftsmanship. The innovative hybrid construction combines soft, safe PU foam for the striking surfaces with durable grips that authentically depict fine details. Our designs are created analogously, inspired by the artistry of historical blacksmiths, giving each piece a unique, organic look. Hammerkunst – Tradition reimagined and recreated.Material: PU foam, GRPTotal Length: 104 cmBlade Length: 81 cmBlade Width: 6 cmGrip Length: 14 cmCrossguard Width: 26.5 cmDistance from Blade Tip to GRP Rod: 5 cmWeight: 478 gAll items shown here have been developed for the safe portrayal of combat in live-action roleplay, on stage, or similar settings. The foam weapons consist of a fiberglass-reinforced plastic (GRP) core rod, which is fully covered with soft foam to avoid injuries. Our products are handmade and painted. Therefore, colour tones may vary slightly. Photographic images and screen settings may not represent colours accurately. For production reasons, this "Hammerkunst" foam weapon has a small hole on each side of the blade. This does not affect functionality and is not considered a defect.
The extraordinary short sword "Korax" is the ideal choice for elves, rangers, and adventurous characters. Its curved crossguard, intricately pierced pommel, and convincingly realistic leather grip give this foam weapon a distinctive, imaginative look. The compact design makes the "Korax" particularly easy to handle, making it ideal for agile fighters who need to assert themselves in forests, ruins, or tight battle chaos. A detailed and robust foam weapon that impresses both functionally and aesthetically. Our Hammerkunst LARP foam weapons combine high-tech innovation with traditional craftsmanship. The innovative hybrid construction merges soft, safe PU foam for the striking surfaces with sturdy grips that authentically capture the finest details. Our designs are created by hand, inspired by the artistry of historical blacksmiths, giving each piece a unique, organic look. Hammerkunst – Tradition reimagined and reinvented.Material: PU foam, fibreglassTotal length: 85.5 cmBlade length: 64 cmBlade width: 5.5 cmGrip length: 11.5 cmCrossguard width: 21 cmDistance from blade tip to fibreglass rod: 5 cmWeight: 371 gAll items shown here are designed for the safe portrayal of combat in live-action role-playing, theatrical performances, or similar events. The foam weapons feature a fibreglass core, fully encased in soft foam to prevent injuries. Our products are handcrafted and painted, meaning slight variations in colour may occur. Photographic representations and screen settings may not always accurately reflect actual shades. For production reasons, this "Hammerkunst" foam weapon has a small hole on each side of the blade. This does not affect its functionality and does not constitute a defect.