Il set comprende:- corazza Vladimir brunita- spallacci Vladimir bruniti- cintura con cosciali Vladimir brunita- bracciali Vladimir bruniti- schinieri Vladimir bruniti
Our "Vigor"
armour was designed for the more imposing characters on the battlefield – referring
not only to their formidable fighting style. This armour set’s generous
dimensions make it comfortable for longer periods of time even for powerfully
built warriors of both genders. However, a small tweak in design also allows
adjusting "Vigor" to slender people. To do so, you simply have to
remove the central tasset from the armour belt and, if necessary, shorten the
belt. In so doing, you can improve the fit for wearers with slimmer hips.
The style is reminiscent of
the massive armour suits familiar from certain well-known manufacturers of
tabletop miniatures. The oversized bevor in particular lends the armour suit
its exceptional look. "Vigor" is slightly burnished, giving the
armour pieces a worn, but well-cared-for character. The burnishing procedure may
cause small spots similar to rain spatters. As the finish is applied individually
for hand, it is unique for every single armour. However, if you’d prefer your
armour unburnished, you can also easily remove the burnishing layer using a
soft abrasive fabric.
At the heart of "Vigor"
is the broad torso armour, which the large bevor can be attached to using
buckles. The torso armour consists of flexibly connected chest and back plates.
The lower parts protecting the chest and back consist of moving plates. Two
straps on either side are used to close the torso armour and adjust the fit.
The bevor contributes a lot
to the armour set’s brute look, and it is easy to adorn with wax seals or to
blazon it with your coat of arms. It consists of two interlaced moving segments;
the interior front segment slants way down and rests against the torso,
ensuring that neither your vision nor your breathing are impaired. The outer
neck segment rests on the spaulders and is broad enough to offer full mobility
for your head.
The mighty spaulders
consist of seven segments and also feature segmented upper arm protection. All the
parts are connected flexibly and allow a maximum in freedom of movement.
The armour belt is long
enough even for broader hips and features three tassets. These are suspended
from the belt from loops so that their position can be adjusted individually. In
order to reduce the armour belt’s size, you can remove the central tasset and
thus shorten the belt’s circumference.
The vambraces are rather slender
in comparison to the rest of the armour parts. For that reason, they will not
hinder you when carrying a shield. They consist of three slightly curved
segments and feature a comfortable cutout for your hand as well as slightly
bent edges around the wrist, which significantly increase wearing comfort.
The greaves are long enough
to also protect the wearer’s knees. The upper part is mounted to be movable,
making movements such as kneeling easier. The sweeping knee protection is
another very special design element of this armour set. Broad cutouts for your
feet as well as bent edges increase wearing comfort.
It goes without saying that
all edges of these armour pieces are beaded.
Material: steel, leather
Measurements of the armour
parts:
Torso:
Chest width: 67cm
Length (shoulders to lower segment): 55cm
Width neck cutout: 18cm
Weight: approx. 5.3kg
Bevor:
Front segment height: 20.5cm
Neck segment height: 18cm
Side height: 8cm
Length (front to neck) 37cm
Width (inner) front segment: 23cm
Width (outer) neck segment: 28.5cm
Weight: 1.6kg
Armour belt:
Length: approx. 160cm
Width approx. 2.8cm
Side tassets:
Width (top): 47cm
Width (bottom): 24cm
Length: 36cm
Weight (each): approx. 1.8kg
Central tasset:
Width (top): 36cm
Width (bottom): 13cm
Length: 34.5cm
Weight: approx. 1.3kg
Vambraces:
Length: 34cm
Circumference (upper strap): 24cm
Circumference (lower strap): 13cm
Weight (pair): approx. 1.5kg
Greaves:
Length: 52cm
Circumference (upper strap): 26cm
Circumference (lower strap): 20cm
Weight (pair): approx. 4kg
The parts of this armour
set are manufactured by hand. For this reason, we ask you to allow for slight
deviations in measurements and weight.
Adjustments to several of the measurements are possible by carefully bending
the respective armour parts.
Our leather straps are cut from robust cowhide and are available in
many lengths, widths and colours. Build your own belt and decorate it
with our many buckles and fittings!Material: upper leather
Lengths: 135cm & 170cmWidths: 2cm-5cm
Leather is a natural product and absorbs dyes differently. Additionally, our products are handmade. Therefore, colours and dimensions may vary slightly. Photographic representation and your display settings can affect colour reproduction. We deliver our leather products only lightly greased. Using leather grease will result in a darker shade.
The two-piece belt set "Schleswig" consists of a belt tongue and a long buckle. Made of brass and cast by hand, it is inspired by belt decorations of the Vikings.
Suitable for belts from 1 cm to 1,5 cm wide
Material: brasstongue dimensions: 1,3 cm x 6, 3 cmDimensions of the buckle: 2 cm x 7 cm
La camicia Alex si distingue per gli incroci di lacci lungo le maniche, è disponibile con gli occhielli in metallo o le asole cucite. Il tipico colletto e le stringhe lo rendono il capo medievale per eccellenza.Materiale: cotoneTaglie: dalla S alla XXL
With "Tinne" you get 8 brass nails - 1.6 mm round head pins made of solid brass MS-64 with a share of 64% copper and 36% zinc. Pins made of this alloy are very easy to shape when riveting and are thus ideal for attaching historic and fantastic fittings in medieval reenactment and LARP.Dimensions: 1.6 mm x 13 mm.Fix fittings and decorations with brass nails, how does that work?The fitting or decoration to be fastened is placed on the belt or pocket. Mark the required 2 mm holes in the desired places and punch the leather with an eel. Of course, using a pair of punch pliers is also possible, but the hole must not be too large then, because the leather is punched out and, as with the use of eels, can not contract again around the rivet. The head of the pin should of course be on the side that is visible later, the so-called "show side". Depending on the thickness of the material, shorten the brass pin on the pointed side to 1.5 mm - 2 mm and tap it in circular strokes with the smallest possible round hammer, so that a slightly arched head is formed and the fitting is solidly connected to the backing material. For smoothing a sandpaper with 600er Körning is recommended. For a better grip, you can also use a small washer, but the riveting is then not so medieval.Have fun crafting!
Questa graziosa fibula viene utilizzato come chiusura per mantelli, ma può anche essere utilizzata come semplice decorazione. È realizzata in robusto ferro battuto e quindi adatta anche a tessuti leggermente più spessi come la lana. Materiale: ferro battuto Diametro perone piccolo: 8 cm Diametro perone grande: 10 cm
Varianti da 12,50 €*
15,90 €*
Oltre 25 anni di esperienza
Scelta tra oltre 5.000 articoli
Spedizione gratuita da 150€ (IT+)
Spedizione veloce, anche all'estero
Questo sito web utilizza i cookie per assicurare la miglior esperienza possibile. Ulteriori informazioni...